DiO Connected Home Wireless Switch Micro-module

Уводзіны

This user manual provides detailed instructions for the installation, operation, and maintenance of your DiO Connected Home Wireless Switch Micro-module (Model Chacon 54700). This compact device allows you to transform any standard switch into a wireless remote control for various DiO receivers, including lighting modules, shutter modules, smart plugs, and smart bulbs. Please read this manual carefully before use to ensure proper functionality and safety.

Інфармацыя па бяспецы

• Электрабяспека: Installation should only be performed by a qualified electrician or in strict accordance with local electrical codes. Ensure power is disconnected before any installation or maintenance.
• Толькі для выкарыстання ў памяшканні: This device is designed for indoor use. Do not expose it to moisture, extreme temperatures, or direct sunlight.
• акумулятар: The micro-module is battery-powered (3V CR2032). Ensure correct battery polarity when inserting. Do not attempt to recharge non-rechargeable batteries. Dispose of batteries responsibly.
• Сумяшчальнасць: Only use this micro-module with compatible DiO 1.0 receivers.
• дзеці: Трымайце прыладу і яе кампаненты ў месцах, недаступных для дзяцей.

Змест пакета

• 1x DiO Wireless Switch Micro-module (Chacon 54700)
• 4x Pre-wired cables (included for convenience)
• 1x Кіраўніцтва карыстальніка (гэты дакумент)

Image 1: The DiO Wireless Switch Micro-module, a compact grey device designed for integration behind a standard wall switch.

Прадукт скончаныview

The DiO micro-module is a small, battery-powered transmitter that converts the action of a traditional wall switch into a wireless radio signal. This signal can then control any compatible DiO 1.0 receiver within a 50-meter range (in open field).

Малюнак 2: Крупны план view of the DiO micro-module, showing the S1 and S2 terminals for connecting to a wall switch, and the battery compartment.

• Кампактны дызайн: Fits easily behind most standard wall switches.
• Бесправадное кіраванне: Transmits radio signals (433.92 MHz) to DiO 1.0 receivers.
• Харчаванне ад батарэі: Uses a 3V CR2032 battery (not included).
• Двайны ўваход: Features S1 and S2 terminals for single or double switch configurations.

Ўстаноўка

The micro-module is designed for easy installation behind an existing wall switch. Ensure the main power supply to the circuit is turned OFF before proceeding with installation.

1. Prepare the Switch Box: Carefully remove your existing wall switch from its mounting box. Ensure there is sufficient space behind the switch for the micro-module (Dimensions: 14.4 x 10.9 x 2.5 cm).
2. Connect the Micro-module:
   • Connect the wires from your wall switch to the S1 and/or S2 terminals on the DiO micro-module.
   • For a single switch, use S1. For a double switch (e.g., two-way switch), use both S1 and S2.
   • Важна: This micro-module is a transmitter and does not require connection to the 220V mains power. It is battery-operated. Do NOT connect it to the main electrical circuit.
3. Устаўце батарэю: Open the battery compartment on the micro-module and insert a 3V CR2032 battery, observing correct polarity.
4. Position the Module: Carefully place the micro-module into the wall switch box, ensuring wires are not pinched.
5. Reinstall Switch: Mount your wall switch back into its position.
6. Аднавіць сілу: Зноў уключыце асноўную крыніцу сілкавання.

Image 3: Diagram illustrating the compact DiO micro-module being installed behind a standard wall switch, fitting within the wall box.

Image 4: Wiring diagram showing the DiO micro-module connected to a switch, emphasizing that it is battery-powered (CR2032 3V) and should not be connected to 220V mains.

Інструкцыя па эксплуатацыі

Once installed, the DiO micro-module acts as a wireless transmitter for your wall switch. It allows you to control any compatible DiO 1.0 receiver.

Pairing with DiO Receivers

To control a DiO receiver (e.g., a lighting module, smart plug, or shutter module), you must first pair the micro-module with the receiver. The pairing process typically involves:

1. Activate Learning Mode on Receiver: Refer to your DiO receiver's manual to put it into learning mode. This usually involves pressing a button on the receiver for a few seconds.
2. Send Pairing Signal: Within 10 seconds of activating learning mode on the receiver, press the wall switch connected to your DiO micro-module. The receiver should confirm successful pairing (e.g., by flashing a light or making a sound).
3. Праверка функцыянальнасці: Once paired, operate the wall switch to ensure it controls the receiver as expected (e.g., turn lights ON/OFF).

The micro-module supports ON/OFF functions and can be used to centralize control of multiple devices or activate specific scenarios within your DiO smart home system.

Тэхнічнае абслугоўванне

• Уборка: Працірайце знешнія паверхні прылады мяккай сухой тканінай. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
• Замена батарэі: The micro-module is powered by a 3V CR2032 battery. When the battery is low, the transmission range or reliability may decrease. Replace the battery as needed. Ensure proper disposal of old batteries.
• Няма частак, якія абслугоўваюцца карыстальнікам: Do not attempt to open or repair the micro-module yourself. This will void the warranty.

Ліквідацыю непаладак

• Прылада не адказвае:
  • Check the battery in the micro-module. Replace if necessary.
  • Ensure the micro-module is correctly paired with the DiO receiver. Repeat the pairing process if unsure.
  • Verify that the DiO receiver is powered on and functioning correctly.
  • Check the distance between the micro-module and the receiver. Obstacles like thick walls or metal structures can reduce the wireless range.
• Перарывісты рэжым:
  • This could indicate a low battery. Replace the CR2032 battery.
  • Interference from other wireless devices operating on the same frequency (433.92 MHz) might occur. Try to minimize such interference.
• Switch Not Activating Module:
  • Ensure the wall switch is correctly wired to the S1/S2 terminals of the micro-module.

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

This DiO Connected Home Micro-module comes with a manufacturer's warranty of 2 гады з даты пакупкі. Калі ласка, захавайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.

For technical support, troubleshooting assistance, or to explore other DiO Connected Home products, please visit the official CHACON brand store or contact their customer service.

Visit the CHACON Brand Store