Уводзіны
Дзякуй за пакупкуasing the My Weigh Triton T2 Digital Pocket Scale. This manual provides detailed instructions for the proper use, calibration, and maintenance of your scale to ensure accurate and reliable performance.
The My Weigh Triton T2 series offers high precision (0.01g) in a compact, durable design. It features a robust hard shell with grip ribs, and a removable ABS cover that doubles as an expansion tray. The scale includes an automatic red backlit LCD display for easy readability.
Настройка
- Распакаванне: Carefully remove the scale from its packaging. Ensure all components are present: the Triton T2 scale and 2 AAA batteries.
- Ўстаноўка батарэі: Locate the battery compartment on the underside of the scale. Insert the two AAA batteries, ensuring correct polarity.
- Размяшчэнне: Place the scale on a flat, stable, and level surface. It is crucial that the scale is not exposed to vibrations, air currents, extreme temperatures (outside 10°C-30°C), high humidity, or dust, as these can affect accuracy.
- Першапачатковае ўключэнне: Turn the scale on. Allow it to self-test and acclimate for a few seconds. The display should show "0.0" or "0.00" once ready.
Image: My Weigh Triton T2 Digital Pocket Scale. The scale is shown with its protective cover open, revealing the digital display, control buttons (On/Off, Unit, Tare), and weighing platform. The display shows "0.00" and the capacity "200g x 0.01g".
Інструкцыя па эксплуатацыі
Базавае ўзважванне
- Уключэнне: Націсніце ① (Power) button to turn the scale on.
- Выбар адзінкі: Націсніце АДЗІНКА button to cycle through available weighing units (e.g., grams, ounces, carats).
- Placing Item: Gently place the item to be weighed on the center of the weighing platform.
- Чытанне: Wait for the display to stabilize and read the weight.
- Выключэнне: Націсніце і ўтрымлівайце ① (Power) button to turn the scale off, or it will automatically shut off after 60 seconds of inactivity.
Функцыя тары
The tare function allows you to subtract the weight of a container, so you only measure the net weight of its contents.
- Пастаўце пусты кантэйнер на платформу для ўзважвання.
- Націсніце ←0→ (Tare/Zero) button. The display will reset to "0.00".
- Add the items to be weighed into the container. The display will show only the weight of the items.
Каліброўка
To ensure the highest accuracy, periodic calibration is recommended. You will need two accurate 100g calibration weights (not included) for this process.
- Выключыце вагі і пастаўце іх на роўную ўстойлівую паверхню.
- Націсніце ←0→ (Tare/Zero) key. The display will show "0.00".
- Націсніце і ўтрымлівайце АДЗІНКА key for 5 seconds. The display will show "ZERO" and then the required calibration weight (e.g., "100g").
- Gently place the first 100g calibration weight on the center of the tray and wait for 3 seconds. The display will then show the next required calibration weight (e.g., "200g").
- Next, place another 100g weight on the platform to make a total of 200g. Wait for 3 seconds. The display will show "CAL" then "PASS". Calibration is now complete. Remove the weights.
Тэхнічнае абслугоўванне
- Уборка: Выкарыстоўвайце мяккі, damp cloth to clean the scale. Do not use abrasive cleaners or immerse the scale in water.
- захоўванне: When not in use, store the scale in a dry, stable environment, away from extreme temperatures and humidity. The protective cover should be closed to prevent dust and damage.
- Замена батарэі: Replace batteries when the low battery indicator appears on the display or if the scale does not power on.
- Абарона ад перагрузкі: The scale features exclusive 5PPS overload protection. Avoid placing items heavier than the maximum capacity (200g) on the scale to prevent damage.
Ліквідацыю непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Шкала не ўключаецца. | Разраджаныя або няправільна ўсталяваныя батарэйкі. | Праверце палярнасць батарэек або заменіце іх новымі батарэйкамі тыпу AAA. |
| Inaccurate readings or fluctuating display. | Unstable surface, air currents, temperature changes, or need for calibration. | Place scale on a flat, stable surface away from drafts. Allow scale to acclimate to room temperature. Perform calibration. |
| "O-Ld" or "Err" message on display. | Шкала перагружаная. | Remove item immediately. Do not exceed the maximum capacity of 200g. |
| Display shows "UNST". | Scale is unstable. | Ensure scale is on a firm, level surface and not subject to vibrations. |
Тэхнічныя характарыстыкі
- мадэль: SCMT2-200
- Ёмістасць: 200 г
- Accuracy/Precision: 0.01 г
- Адзінкі вагі: (Typically grams, ounces, carats)
- Магутнасць: 2 х ААА батарэі (у камплекце)
- Аўтаматычнае выключэнне: 60 секунд бяздзейнасці
- Працоўная тэмпература: 10°C - 30°C (50°F - 86°F)
- Дысплей: Red Backlit LCD
- Памеры маштабу: 152 х 82.5 х 19.5 мм (6 х 3.25 х 0.77 цалі)
- Памеры платформы: 79.9 х 63.9 мм (3.15 х 2.52 цалі)
- матэрыял: Rigid ABS Polymer
- Асаблівасці: Exclusive 5PPS Overload Protection, Removable Cover/Expansion Tray, Magnetic Cover-Clasp, Large Soft-Touch Rubber Keys.
Гарантыя і падтрымка
My Weigh offers a 30-year warranty on the Triton T2 Digital Pocket Scale, which also includes a CE lifetime warranty. This warranty covers defects in materials and workmanship under normal use.
For technical support, warranty claims, or further information, please contact My Weigh customer service through their official webсайта або ўпаўнаважаных дыстрыб'ютараў.