Jebao JGP25000 6000GPH Water Pond Pump Instruction Manual

Важная інфармацыя па бяспецы

Please observe the following safety precautions to prevent injury or damage to the pump.

ПАПЯРЭДЖАННЕ: Рызыка паразы электрычным токам

• Connect the pump only to a properly grounded, grounding-type receptacle.
• Install the pump only on a circuit protected by a Ground-Fault Circuit-Interrupter (GFCI).
• This pump has not been investigated for use in swimming pools or marine areas. Do not use in these environments.

УВАГА:

• This pump is designed for use with water only.
• DO NOT RUN DRY: Operating the pump without water can cause severe damage and void the warranty.
• Ensure water temperature does not exceed 96°F (35.5°C).

Прадукт скончаныview

The Jebao JGP25000 is a high-performance water feature pump engineered for reliability and ease of use. It features a robust design suitable for continuous operation in various water garden applications.

Асноўныя характарыстыкі:

• Універсальнае кіраванне: Designed for both submersible and in-line use.
• Гнуткая ўстаноўка: Capable of vertical or horizontal operation, ideal for skimmers.
• Трывалыя кампаненты: Features wear-resistant ceramic bearings and shaft for extended life.
• Large Pre-filter: Reduces the frequency of cleaning by handling solids up to 3/4" diameter.
• Абарона ад цеплавой перагрузкі: Enhances safety and pump longevity.
• Лёгкае абслугоўванне: Quick and tool-free disassembly for cleaning.
• Доўгі шнур сілкавання: Equipped with a 33 ft. power cord for flexible placement.

Інструкцыя па наладзе

1. Распакаванне і праверка

• Асцярожна выміце помпу з упакоўкі.
• Inspect the pump for any signs of damage during transit. Do not use if damaged.
• Пераканайцеся, што ўсе кампаненты прысутнічаюць.

2. Варыянты размяшчэння

The JGP25000 pump offers flexible installation:

• Падводная ўстаноўка: Place the pump directly into the pond or water feature. Ensure it is fully submerged and rests on a stable, level surface.
• Убудаваная ўстаноўка: The pump can be installed outside the water feature, connected via appropriate plumbing.
• Арыентацыя: The pump can be positioned vertically or horizontally, accommodating various setups, including skimmers.

3. Connecting Plumbing

• Attach appropriate tubing or piping to the pump's outlet. Ensure all connections are secure and watertight to prevent leaks.
• Выкарыстоўвайце шланг клamps or thread sealant as necessary for a tight seal.

4. Электрычнае падключэнне

• Before connecting to power, ensure the pump is correctly installed and submerged (if applicable).
• Plug the 33 ft. power cord into a properly grounded, GFCI-protected electrical outlet.
• Avoid using extension cords if possible. If an extension cord is necessary, ensure it is rated for outdoor use and capable of handling the pump's wattage (520 Вт).

Інструкцыя па эксплуатацыі

1. Першапачатковы запуск

• Ensure the pump is fully submerged in water or primed if used in an in-line setup. Ніколі не запускайце помпа насуха.
• Connect the pump to the power supply. The pump should start immediately.
• Check for proper water flow and any unusual noises.

2. Бесперапынная праца

The Jebao JGP25000 is designed for continuous operation. Monitor water levels regularly to ensure the pump remains submerged and to prevent dry running.

3. Выключэнне

• Каб выключыць помпу, проста адключыце яго ад электрасеткі.
• For extended periods of non-use, especially during freezing temperatures, remove the pump from the water, clean it, and store it in a dry, frost-free location.

Тэхнічнае абслугоўванне

Regular maintenance ensures optimal performance and extends the life of your pump. The JGP25000 is designed for easy, tool-free disassembly for cleaning.

1. Ачыстка папярэдняга фільтра

• Disconnect the pump from the power supply before performing any maintenance.
• Remove the pump from the water or its in-line setup.
• Disassemble the pre-filter housing (typically by unlatching or unscrewing components by hand).
• Rinse the pre-filter and impeller chamber thoroughly with clean water to remove debris, algae, and sediment.
• Inspect the impeller for any blockages or damage.
• Reassemble the pump, ensuring all parts are securely fitted.

2. Падрыхтоўка да зімы

• Before freezing temperatures arrive, remove the pump from the water.
• Clean the pump thoroughly as described above.
• Store the pump in a dry, frost-free location to prevent damage from ice expansion.

Ліквідацыю непаладак

If troubleshooting steps do not resolve the issue, please contact Jebao customer support.

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

Гарантыя вытворцы

The Jebao JGP25000 Water Pond Pump is backed by a 1-гадовая гарантыя вытворцы з даты пакупкі. Гэтая гарантыя распаўсюджваецца на дэфекты матэрыялаў і вырабу пры нармальным выкарыстанні. Калі ласка, захавайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.

The warranty does not cover damage caused by misuse, improper installation, running the pump dry, freezing, or unauthorized modifications.

Падтрымка кліентаў

For technical assistance, warranty inquiries, or replacement parts, please contact Jebao customer support:

• электронная пошта: info@jebao.com
• Webсайт: www.jebao.com