1. Уводзіны
The Orbit 94886 Pocket Star Ultima is a digital irrigation controller designed for indoor use, capable of managing up to 6 watering stations. This manual provides comprehensive instructions for the installation, programming, and operation of your new irrigation timer, ensuring efficient and effective watering for your landscape. Its user-friendly interface, featuring a large LCD display and intuitive buttons, simplifies the programming process.
2. Інфармацыя па бяспецы
- This controller is designed for indoor use only. Do not install it outdoors or in areas exposed to direct weather conditions.
- Перад тым, як праводзіць якія-небудзь мантажы электраправодкі або тэхнічнае абслугоўванне, пераканайцеся, што электрасілкаванне адключана.
- Use only the specified 24V AC power adapter. Using an incorrect power supply can damage the unit and void the warranty.
- Keep the controller away from water sources and high humidity to prevent electrical hazards.
- Do not attempt to open or repair the controller yourself. Refer all servicing to qualified personnel.
3. Змесціва ўпакоўкі
Your Orbit 94886 Pocket Star Ultima package should contain the following item:
- One (1) Orbit 94886 Pocket Star Ultima 6-Station Indoor Irrigation Controller.
4. Прадукт скончыўсяview
The Orbit Pocket Star Ultima controller features a clear LCD display, intuitive navigation buttons, and a rotary dial for easy program selection. The terminal block for wiring is located at the bottom of the unit, protected by a removable cover.
Малюнак 4.1: Спераду view of the Orbit 94886 Pocket Star Ultima controller, showing the LCD screen, control buttons, and rotary dial.
Figure 4.2: The controller with its bottom cover attached, illustrating its compact design.
5. Настройка
5.1. Ўстаноўка
The Orbit 94886 controller is designed for indoor installation. Choose a clean, dry location away from direct sunlight and extreme temperatures. Mount the unit securely to a wall using appropriate screws and anchors.
Малюнак 5.1: Выпample installation diagram, showing the indoor controller connected to an outdoor irrigation valve.
5.2. Электраправодка
Before wiring, ensure the power supply to the controller is disconnected. The terminal block is located at the bottom of the unit. Use simple tool-less "push-in" terminals for easy wire connections.
- Common Wire (COM): Connect the common wire from your irrigation valves to the terminal labeled "COM". This is typically a white wire.
- Station Wires (1-6): Connect each individual valve wire to its corresponding station terminal (1 through 6).
- Rain Sensor (SENSOR): If using a rain sensor (sold separately), connect its wires to the "SENSOR" terminals. The controller supports a normally closed rain sensor.
- Pump Start Relay (PUMP): If you have a pump start relay or master valve, connect its wires to the "PUMP" terminals.
- 24V AC Power (24VAC): Connect the 24V AC power adapter wires to the "24VAC" terminals.
Малюнак 5.2: падрабязна view of the wiring terminal block, showing connections for 24VAC, SENSOR, COM, stations 1-6, and PUMP.
Important Power Limitation Warning:
The controller's power supply has specific current limitations. Each valve connected should not exceed 150mA (milliampere) at 24V. The total current drawn by all simultaneously active valves must not exceed 500mA. For example, if your valves draw 150mA each, you can operate a maximum of 3 valves simultaneously. If your valves draw 220mA each, you can operate a maximum of 2 valves simultaneously. Exceeding these limits can damage the controller.
6. Інструкцыя па эксплуатацыі
The controller features a rotary dial to select different functions and buttons for navigation and setting values.
Figure 6.1: Controller interface with a guide to button and dial functions.
6.1. Rotary Dial Functions
- УСТАНАВІЦЬ ГАДЗІННІК: Used to set the current time and day.
- УСТАЛІЦЬ ДАТУ: Used to set the current year, month, and day.
- ЧАС ПАЧАТКУ: Used to set the start times for your watering programs.
- ЧАС РАБОТЫ: Used to set the duration for each watering station (1 to 99 minutes).
- ЯК ЧАСТА: Used to set the watering frequency (e.g., specific days of the week, odd/even days).
- АЎТА: The default operating mode where programmed schedules run automatically.
- OFF: Disables all watering programs and functions.
6.2. Функцыі кнопак
- УВОД: Confirms a setting or moves to the next step.
- ІНСТРУКЦЫЯ: Initiates manual watering.
- ЯСНА: Clears a setting or program.
- ЗАтрымка дажджу: Activates the rain delay function (24, 48, or 72 hours).
- PROGRAM A-B: Switches between independent programs (A, B, C). The controller supports 3 independent programs.
- Кнопкі +/-: Adjust numerical values up or down.
- Кнопкі са стрэлкамі (налева/направа): Navigate through settings or stations.
6.3. Programming Your Controller
- Устанавіць бягучы час і дату: Павярніце цыферблат у УСТАНОВІЦЬ ГАДЗІННІК і УСТАВІЦЬ ДАТУ. Use the +/- buttons to adjust values and ENTER to confirm.
- Выберыце праграму: Націсніце PROGRAM A-B button to select Program A, B, or C. Each program can have up to 4 start times.
- Устанавіць час пачатку: Павярніце цыферблат у ЧАС ПАЧАТКУ. Use the +/- buttons to set up to four start times for the selected program. Press ENTER after each time.
- Set Run Times: Павярніце цыферблат у Час запуску. Use the arrow buttons to select each station (1-6) and the +/- buttons to set the watering duration (1-99 minutes) for that station. Press ENTER after each.
- Устанавіць частату паліву: Павярніце цыферблат у ЯК ЧАСТА. Select specific days of the week, or choose odd/even day watering. Use the arrow and +/- buttons to make your selections.
- Актываваць праграму: Павярніце цыферблат у АЎТА to enable the programmed schedule.
6.4. Ручное кіраванне
To water manually, turn the dial to АЎТА, затым націсніце КІРАЎНІЦТВА button. Use the arrow buttons to select the desired station and the +/- buttons to set the run time. Press ENTER to start manual watering. The controller will return to automatic mode after the manual cycle is complete.
6.5. Функцыя затрымкі дажджу
If rain is expected or has occurred, you can temporarily suspend watering. Turn the dial to АЎТА, затым націсніце ЗАТРЫМКА ДАЖЖДУ button. Use the +/- buttons to select a delay of 24, 48, or 72 hours. The controller will automatically resume the programmed schedule after the delay period.
7. Тэхнічнае абслугоўванне
- Трымайце кантролер чыстым і без пылу і смецця. Выкарыстоўвайце для чысткі мяккую сухую тканіну.
- Ensure the installation area remains dry and protected from moisture.
- Перыядычна правярайце злучэнні правадоў, каб пераканацца ў іх надзейнасці.
- During winter months in cold climates, it is recommended to disconnect the controller and store it indoors to prevent damage from freezing temperatures.
8. Выпраўленне непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Дысплей кантролера пусты. | No power or faulty power adapter. | Check power outlet and power adapter connection. Ensure the 24VAC terminals are correctly wired. |
| Stations are not watering. | Controller is in OFF mode; incorrect programming; faulty wiring; rain sensor activated. | Turn dial to AUTO. Verify program settings (start times, run times, frequency). Check wiring to valves. Check if rain sensor is wet or activated. |
| Only some stations are watering. | Faulty valve; wiring issue to specific station; power limitation exceeded. | Check wiring for the non-watering stations. Test the valve manually. Ensure total current draw does not exceed 500mA (max 150mA per valve). |
| Controller resets or behaves erratically. | Power fluctuations; internal fault; excessive current draw. | Забяспечце стабільнае электразабеспячэнне. Verify that the total current draw from active valves does not exceed 500mA. If problems persist, contact support. |
9. Тэхнічныя характарыстыкі
- Марка: Арбіта
- мадэль: 94886
- Колькасць станцый: 6
- Ўстаноўка: У памяшканні
- Спажываная магутнасць: 24 вольт пераменнага току
- Max Current per Valve: 150 мА (0.15 А)
- Max Total Current: 500 мА (0.5 А)
- Памеры прадукту (ДxШxВ): 14.6 см х 6.2 см х 23.5 см
- матэрыял: Пластыкавыя
- Тып дысплея: ВК
- Працоўная тэмпература: 10 Degrees Celsius (minimum, typical operating range is wider)
- Сумяшчальнасць з разумным домам: Несумяшчальны
- UPC: 046878941267
10. Гарантыя
The Orbit 94886 Pocket Star Ultima 6-Station Indoor Irrigation Controller comes with a 3-гадовая абмежаваная гарантыя from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, accidents, unauthorized repairs, or exceeding the specified electrical current limits.
11. Падтрымка
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Orbit customer support. You can typically find contact information on the Orbit webсайце або на ўпакоўцы прадукту.
Orbit Worldwide Webсайт: www.orbitonline.com