Arregui Activa Electronic Surface-Mounted Safe

1. Уводзіны

Thank you for choosing the Arregui Activa Electronic Surface-Mounted Safe. This manual provides essential information for the correct installation, operation, and maintenance of your safe. Please read these instructions carefully before using the product to ensure optimal performance and security.

The Arregui Activa safe is designed to provide secure storage for your valuables, featuring an electronic locking system and a robust construction for surface mounting.

2. Настройка

2.1 Распакаванне

• Carefully remove the safe from its packaging.
• Check that all components are present: safe unit, emergency keys, instruction manual, and mounting hardware.
• Захавайце ўпакоўку для будучай транспарціроўкі або захоўвання.

2.2 Устаноўка батарэі

1. Знайдзіце батарэйны адсек, звычайна на ўнутраным боку дзверцаў сейфа.
2. Адкрыйце крышку батарэйнага адсека.
3. Insert four (4) AA 1.5V alkaline batteries, ensuring correct polarity (+/-).
4. Close the battery cover securely. The safe will emit a beep, indicating successful battery installation.

2.3 Мантаж сейфа

The Arregui Activa safe is designed for surface mounting to a wall or floor. Choose a secure and discreet location.

1. Position the safe in the desired location and mark the drilling points through the pre-drilled holes in the back or bottom of the safe.
2. Drill holes in the wall or floor using an appropriate drill bit for the mounting surface.
3. Insert the provided wall anchors (if applicable) into the drilled holes.
4. Align the safe with the holes and secure it using the provided screws or bolts. Tighten all fasteners firmly.

Image 1: Arregui Activa Electronic Safe, illustrating its compact design suitable for surface mounting.

3. Інструкцыя па эксплуатацыі

3.1 Initial Code Setting

Upon first use, you will need to set your personal access code.

1. With the safe door open, press the red reset button located on the inside of the door (usually near the hinge). The yellow indicator light on the keypad will illuminate.
2. Enter a new personal code (3-8 digits) on the keypad.
3. Confirm the code by pressing the 'A' or '#' button. The safe will beep, and the yellow light will turn off, indicating the code has been successfully set.
4. Праверце новы код з адчыненымі дзвярыма, перш чым зачыніць іх.

3.2 Адкрыццё сейфа

1. Увядзіце свой асабісты код на клавіятуры.
2. Press the 'A' or '#' button. The green indicator light will illuminate, and you will hear a click.
3. Within 5 seconds, turn the knob or handle clockwise to open the door.

3.3 Зачыненне сейфа

• Шчыльна зачыніце дзверы сейфа.
• Turn the knob or handle counter-clockwise to engage the locking bolts. The safe is now secured.

3.4 Змена кода карыстальніка

1. Open the safe using your current code.
2. Press the red reset button on the inside of the door. The yellow indicator light will illuminate.
3. Enter your new personal code (3-8 digits).
4. Confirm the new code by pressing the 'A' or '#' button. The safe will beep, and the yellow light will turn off.
5. Праверце новы код з адчыненымі дзвярыма, перш чым зачыніць іх.

3.5 Emergency Opening (with Key)

In case of battery failure or forgotten code, you can use the emergency key.

1. Знайдзіце аварыйную замочную свідравіну, якая звычайна схаваная за невялікай вечкам на панэлі клавіятуры.
2. Зніміце вечка.
3. Insert the emergency key and turn it clockwise while simultaneously turning the handle to open the safe.
4. Once open, replace the batteries if necessary and reset your code. Keep emergency keys in a secure location away from the safe.

4. Тэхнічнае абслугоўванне

4.1 Замена батарэі

When the batteries are low, the red indicator light will flash or the safe will emit a warning sound when you attempt to open it. Replace all four batteries promptly to ensure continued operation.

• Follow the steps in section 2.2 for battery installation.
• Always use new, high-quality alkaline batteries. Do not mix old and new batteries or different battery types.

4.2 Ачыстка

• Ачысціце знешнія паверхні сейфа мяккай губкайamp тканіна.
• Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі, бо яны могуць пашкодзіць пакрыццё або электронныя кампаненты.

5. Выпраўленне непаладак

6. Тэхнічныя характарыстыкі

7. Інфармацыя аб гарантыі

Arregui products are manufactured to high-quality standards and are guaranteed against manufacturing defects for a period specified by local consumer protection laws from the date of purchase. This warranty does not cover damage caused by improper installation, misuse, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.

8. Падтрымка

For technical assistance, spare parts, or warranty inquiries, please contact your retailer or the Arregui customer service department. Refer to the contact information provided with your purchase documentation or visit the official Arregui webсайт для падрабязнай інфармацыі аб падтрымцы.

Webсайт: www.arregui.es