Кіраўніцтва карыстальніка Bluetooth-сканера штрых-кодаў KOAMTAC KDC350Li-MO-3K-R2

1. Уводзіны

This manual provides essential information for the safe and efficient operation of your KOAMTAC KDC350Li-MO-3K-R2 Bluetooth Barcode Scanner. Please read this manual thoroughly before using the device to ensure proper setup, usage, and maintenance.

2. Змесціва ўпакоўкі

Праверце, ці ёсць усе прадметы ў камплекце з вашым прадуктам:

• KDC350Li-MO-3K-R2 Barcode Scanner
• Высоўны шнурок
• USB-кабель для зарадкі/сувязі
• Product CD (containing drivers and software)

3. Прылада скончанаview

Familiarize yourself with the components of your KDC350Li-MO-3K-R2 scanner.

Малюнак 1: Фронт view of the KDC350Li-MO-3K-R2 scanner. The device features an OLED display at the top, showing 'KoamTac Data Collector KDC350_3key'. Below the screen are two green indicator lights. In the middle section, a prominent circular 'SCAN' button is flanked by two navigation keys on each side (left and right arrows). The KOAMTAC logo is visible at the bottom.

Ключавыя кампаненты:

• OLED -дысплей: Shows device status, scanned data, and menu options.
• Кнопка СКАНІРАВАЦЬ: Activates the barcode scanning laser.
• Клавішы навігацыі: Used to navigate through menus and options on the OLED display.
• Светавыя індыкатары: Provide visual feedback on power, battery, and connection status.

4. Настройка

4.1. Зарадка акумулятара

Before initial use, fully charge the KDC350Li-MO-3K-R2 scanner.

1. Connect the small end of the USB charge/communication cable to the KDC350's charging port.
2. Падключыце большы канец USB-кабеля да адаптара харчавання USB (не ўваходзіць у камплект) або да USB-порта кампутара.
3. The indicator light will show charging status. A full charge typically takes approximately 3-4 hours.

4.2. Уключэнне / выключэнне харчавання

• Каб уключыць: Press and hold the SCAN button for approximately 3 seconds until the display illuminates.
• Каб выключыць: Navigate to the 'Power Off' option in the device menu using the navigation keys and confirm, or press and hold the SCAN button for approximately 5 seconds.

5. Інструкцыя па эксплуатацыі

5.1. Basic Barcode Scanning

Каб сканаваць штрых-код:

1. Point the scanner's laser aperture at the barcode.
2. Press and hold the SCAN button. A red laser line will appear.
3. Align the laser line across the entire barcode.
4. Upon successful scan, the scanner will emit a beep, and the scanned data will appear on the OLED display.
5. Адпусціце кнопку SCAN.

5.2. Using the OLED Display and Navigation

The OLED display provides real-time information and access to device settings. Use the left and right navigation keys to scroll through menu options and select items.

6. Злучэнне Bluetooth

The KDC350Li-MO-3K-R2 supports Bluetooth connectivity for wireless data transfer to host devices such as smartphones, laptops, and desktops.

6.1. Рэжымы спалучэння

The scanner supports various Bluetooth profiles:

• HID (Human Interface Device): Functions as a keyboard, sending scanned data directly to any application with a cursor. No special software is required on the host device.
• SPP (паслядоўны порт Profile): Requires a KTSync application or custom software on the host device to receive data. Offers more control over data handling.
• MFi (Made For iPhone/iPad): Specific profile for iOS devices, often referred to as iOS Bluetooth.

6.2. Pairing with a Host Device

1. Ensure the KDC350 is powered on.
2. On the KDC350, navigate to the 'Bluetooth' menu and select the desired pairing mode (e.g., HID, SPP, iOS).
3. The scanner will enter pairing mode and become discoverable.
4. On your host device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
5. Select 'KDC350' from the list of discovered devices.
6. Follow any on-screen prompts to complete the pairing process. A successful connection will be indicated on the KDC350's display and by an indicator light.

7. Тэхнічнае абслугоўванне

7.1. Ачыстка прылады

To maintain optimal performance, keep the scanner clean.

• Выкарыстоўвайце мяккую безворсовую тканіну, злёгку dampзмыць вадой або мяккім мыйным растворам.
• Не выкарыстоўвайце абразіўныя ачышчальнікі, растваральнікі або агрэсіўныя хімікаты.
• Ensure the scanning window is free of dust and smudges for accurate scanning.

7.2. Сыход за батарэяй

Каб падоўжыць тэрмін службы батарэі:

• Пазбягайце экстрэмальных тэмператур.
• Рэгулярна зараджайце акумулятар, але не пакідайце яго цалкам разраджаным на працяглы час.
• Калі прылада захоўваецца працяглы час, зарадзіце яе прыкладна на 50% перад захоўваннем.

8. Выпраўленне непаладак

If you encounter issues with your KDC350Li-MO-3K-R2, refer to the following common problems and solutions:

• Прылада не ўключаецца: Пераканайцеся, што акумулятар зараджаны. Падключыце да крыніцы харчавання і паспрабуйце яшчэ раз.
• Cannot scan barcodes: Check if the laser is active. Ensure the barcode is not damaged and is within the scanner's range. Clean the scanning window.
• Праблемы з падключэннем Bluetooth: Ensure Bluetooth is enabled on both the scanner and the host device. Verify the correct pairing mode is selected. Try unpairing and re-pairing the devices.
• Scanned data not appearing on host device: Confirm successful Bluetooth pairing. If using HID mode, ensure the cursor is in a text field. If using SPP, verify the KTSync application or custom software is running and configured correctly.

For further assistance, consult the KOAMTAC webсайт або звярніцеся ў службу падтрымкі кліентаў.

9. Тэхнічныя характарыстыкі

10. Гарантыя і падтрымка

KOAMTAC products are designed for reliability and performance. For information regarding product warranty, please refer to the warranty card included in your package or visit the official KOAMTAC webсайт.

For technical support, software downloads, or frequently asked questions, please visit the KOAMTAC support portal or contact their customer service directly. Contact details can typically be found on the manufacturer's webсайт.