JUWEL 7613 Мэблевы сейф з лічбавай камбінацыяй - Інструкцыя карыстальніка

1. Уводзіны

Thank you for choosing the JUWEL 7613 Furniture Safe. This high-quality safe, made in Italy, features a reliable digital electronic combination system for securing your valuables. This manual provides essential information for the proper installation, operation, and maintenance of your safe to ensure its longevity and your peace of mind. Please read these instructions carefully before using the safe.

Малюнак 1: The JUWEL 7613 Furniture Safe with its door open, revealing the digital keypad on the inside of the door and the two robust locking bolts. The interior is a contrasting teal color, and the JUWEL logo is visible on the top left of the safe's exterior.

2. Настройка

2.1 Распакаванне

• Carefully remove the safe from its packaging.
• Inspect the safe for any signs of damage. If damaged, contact your supplier immediately.
• Retain packaging materials for future transport or storage if necessary.

2.2 Устаноўка батарэі

The safe's digital combination system is powered by 6V (4 x LR6 AA 1.5V) batteries. An emergency power supply is also possible using a 9V (6LR61) battery.

1. Locate the battery compartment, typically on the inside of the safe door or behind the keypad.
2. Insert 4 new LR6 AA 1.5V alkaline batteries, ensuring correct polarity (+/-).
3. Надзейна зачыніце крышку батарэйнага адсека.
4. For emergency power, a 9V (6LR61) battery can be connected to the external contacts on the keypad if the internal batteries are depleted.

2.3 Мантаж

The JUWEL 7613 safe is designed for wall mounting. Proper installation is crucial for security.

• Choose a discreet and secure location for mounting.
• Ensure the mounting surface (e.g., a solid wall) can support the weight of the safe and its contents.
• Use appropriate fasteners (not included) for your specific wall type.
• Калі ў вас ёсць сумневы, звярніцеся да спецыяліста па ўсталёўцы.

2.4 Initial Code Setting

Upon first use, you will need to set your personal digital combination. Refer to the specific instructions provided with your safe for the exact procedure, as it may vary slightly. Generally, this involves:

1. With the safe door open, locate the internal reset button (often red or a small hole requiring a pin).
2. Press the reset button. The keypad should emit a beep and/or a light will illuminate.
3. Enter your desired new code (typically 3-8 digits) on the keypad.
4. Confirm the code by pressing the 'E' or 'OK' button.
5. Test the new code several times with the door open before closing it.

Важна: Choose a memorable but not easily guessable code. Do not write down your code near the safe.

3. Інструкцыя па эксплуатацыі

3.1 Адкрыццё сейфа

1. Enter your personal digital combination on the keypad.
2. Press the 'E' or 'OK' button to confirm.
3. If the code is correct, the safe will beep, and the motor will engage to retract the locking bolts.
4. Turn the handle (if present) or pull the door open within a few seconds.

If an incorrect code is entered, an error indicator (e.g., 'ERROR' light) will illuminate, and the safe will remain locked. After multiple incorrect attempts, the safe may enter a lockout period.

3.2 Зачыненне і замыканне сейфа

1. Шчыльна зачыніце дзверы сейфа.
2. Turn the handle (if present) to extend the locking bolts. The safe will automatically lock.
3. Verify that the door is securely locked by gently attempting to open it.

3.3 Changing Your Digital Combination

It is recommended to change your code periodically for enhanced security.

1. Open the safe using your current code.
2. With the door open, press the internal reset button.
3. Enter your new desired code (3-8 digits).
4. Confirm the new code by pressing the 'E' or 'OK' button.
5. Test the new code multiple times with the door open before closing it.

4. Тэхнічнае абслугоўванне

4.1 Замена батарэі

When the batteries are low, the keypad may indicate this with a warning light or weaker beeps. Replace all 4 AA batteries promptly to avoid being locked out.

• Адчыніце дзверы сейфа.
• Зніміце крышку батарэйнага адсека.
• Replace all old batteries with new LR6 AA 1.5V alkaline batteries, observing polarity.
• Зачыніце вечка адсека.

4.2 Ачыстка

Ачысціце знешнія паверхні сейфа мяккай губкайamp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or the electronic components.

5. Выпраўленне непаладак

5.1 Safe Does Not Open After Entering Code

• Няправільны код: Ensure you are entering the correct digital combination. Try again carefully.
• Нізкі ўзровень батарэі: If the keypad lights are dim or there are no beeps, the batteries may be low. Replace them as described in Section 4.1.
• Аварыйнае харчаванне: If internal batteries are completely dead, connect a 9V (6LR61) battery to the external contacts on the keypad to provide temporary power and open the safe.
• Lockout Period: If too many incorrect codes were entered, the safe may be in a temporary lockout state. Wait a few minutes and try again.

5.2 Клавіятура не рэагуе

• Разраджаныя батарэі: The most common cause. Replace all 4 AA batteries.
• Палярнасць батарэі: Double-check that batteries are inserted with correct polarity.

5.3 Door Does Not Close Properly

• Абструкцыя: Check for any items inside the safe that might be preventing the door from closing fully.
• Фіксуючыя балты: Ensure the locking bolts are fully retracted before attempting to close the door.

6. Тэхнічныя характарыстыкі

7. Гарантыя і падтрымка

This JUWEL safe is manufactured to high standards and comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official JUWEL webсайт для атрымання падрабязных гарантыйных умоў.

For technical support, spare parts, or further assistance, please contact JUWEL customer service or your authorized dealer. You can often find contact information on the manufacturer's webсайт: www.juwel.it