Інструкцыя па эксплуатацыі свідравальнай машыны для металу Fein KBB60 60 мм

Уводзіны

This manual provides comprehensive instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of your Fein KBB60 60mm Metal Core Drilling Unit. Please read this manual thoroughly before using the device to ensure proper handling and to prevent injury or damage.

The Fein KBB60 is a robust and powerful metal core drilling unit designed for professional use, featuring a 1400 Watt motor, two-speed gearbox, and a strong magnetic holding power of 11000 Newton for secure attachment to ferromagnetic materials.

Інструкцыі па тэхніцы бяспекі

Always wear appropriate personal protective equipment (PPE) including safety glasses, hearing protection, and gloves when operating the drilling unit. Ensure the workpiece is securely clamped and the magnetic base has full contact with a clean, flat, ferromagnetic surface before starting. Disconnect power before performing any maintenance or changing accessories.

• Пераканайцеся, што крыніца харчавання адпавядае аб'ёмуtagпазначана на заводскай таблічцы інструмента.
• Трымайце рабочую зону ў чысціні і добра асветленым. Загрувашчаныя або цёмныя месцы выклікаюць аварыі.
• Не выкарыстоўвайце электраінструменты ў выбуханебяспечнай атмасферы, напрыклад, у прысутнасці гаручых вадкасцей, газаў або пылу.
• Падчас працы з электраінструментам не дапускайце дзяцей і навакольных.
• Пазбягайце выпадковага запуску. Упэўніцеся, што выключальнік знаходзіцца ў становішчы "Выключана", перш чым падключаць разетку.
• Выкарыстоўвайце правільны інструмент для вашага прымянення. Не перагружайце інструмент.
• Беражліва даглядайце за інструментамі. Трымайце рэжучыя інструменты вострымі і чыстымі.
• Праверце, ці не адсутнічаюць зрухі або заліпанне рухомых частак, паломкі дэталяў і любыя іншыя ўмовы, якія могуць паўплываць на працу інструмента.

Змест пакета

Пасля распакавання пераканайцеся, што ўсе пералічаныя ніжэй кампаненты наяўныя і не пашкоджаныя:

• 1 x Fein KBB60 Metal Core Drilling Unit
• 1 х чахол
• 1 x Coolant Tank
• 1 x Lashing Strap
• 1 x Swarf Hook
• 2 х Цэнтруючыя шпількі
• 1 x Contact Guard
• 1 x Socket Head Wrench 5mm
• 1 х ручка для пераноскі

Figure 1: Fein KBB60 drilling unit and its complete set of accessories, including the carry case, coolant tank, lashing strap, swarf hook, centering pins, contact guard, socket head wrench, and carry handle.

Настройка

1. Attaching the Carry Handle: Secure the extra carry handle to the designated mounting points on the unit for easier transport.
2. Mounting the Coolant Tank: Attach the integrated coolant tank to the unit. Ensure it is securely fastened and fill it with appropriate cutting fluid.
3. Installing the Core Drill Bit:
   • Пераканайцеся, што прылада адключана ад сеткі.
   • Insert the centering pin into the core drill bit.
   • Insert the core drill bit with the centering pin into the Weldon holder.
   • Tighten the set screws on the Weldon holder firmly using the provided 5mm socket head wrench to secure the drill bit.
4. Размяшчэнне прылады: Place the magnetic foot on a clean, flat, ferromagnetic surface. Ensure full contact for maximum magnetic holding power (11000 Newton). Activate the magnetic base switch.
5. Падключэнне магутнасці: Plug the 3.8-meter power cable into a suitable power outlet.

Figure 2: The Fein KBB60 drilling unit prepared for use, showing the magnetic base, drill bit, and control handles.

Інструкцыя па эксплуатацыі

1. Выбар хуткасці: The unit features a mechanical 2-speed gearbox. Select the appropriate speed (330 rpm for 1st gear, 660 rpm for 2nd gear) based on the material and drill bit diameter. Lower speeds are generally for larger diameters and harder materials.
2. Activating the Magnet: Ensure the magnetic base is firmly engaged with the workpiece before starting the motor. The magnetic holding power is 11000 Newton.
3. Запуск рухавіка: Turn on the motor using the power switch. Allow the motor to reach full speed before engaging the drill bit with the workpiece.
4. Бурэнне: Use the feed hand wheel to slowly lower the drill bit into the workpiece. Apply steady, even pressure. The feed hand wheel can be moved from one side to the other for user convenience.
5. Coolant Flow: Ensure the coolant system is active and providing sufficient lubrication and cooling to the drill bit during operation, especially for deep holes or hard materials.
6. Monitoring Drilling Depth: The extra-long drill shaft allows for a cutting depth of up to 75mm. Monitor the depth to avoid over-drilling.
7. Спыненне аперацыі: Once the drilling is complete, retract the drill bit from the workpiece using the feed hand wheel, then turn off the motor. Finally, deactivate the magnetic base.

Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and optimal performance of your Fein KBB60 drilling unit.

• Уборка: After each use, clean the unit, especially the magnetic base and the drill bit holder, to remove metal chips and dust. Use the provided swarf hook to clear debris.
• Сістэма астуджэння: Regularly check the coolant tank for fluid level and refill as needed. Clean the coolant lines and nozzles to prevent blockages.
• Магнітная база: Keep the magnetic foot clean and free of debris to ensure maximum holding power. Any foreign material can reduce the magnetic force.
• Кабелі і злучэнні: Inspect the power cable and all connections for signs of wear, cuts, or damage. Replace damaged cables immediately. The motor wiring is concealed for protection.
• Drill Bit Holder: Ensure the Weldon holder is clean and the set screws are in good condition. Replace if worn or damaged.
• захоўванне: Store the unit in its carry case in a dry, secure location when not in use.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

Гарантыя

The Fein KBB60 60mm Metal Core Drilling Unit comes with a Гарантыя 6 месяцаў on the product from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. Please retain your purchase receipt as proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, neglect, unauthorized repairs, or normal wear and tear.

Падтрымка кліентаў

For technical assistance, spare parts, or warranty claims, please contact your authorized Fein dealer or the manufacturer's customer service. When contacting support, please have your product model number (KBB 60) and serial number (if applicable) ready.

For more information, you may visit the official Fein webсайт або звярніцеся да мясцовага дыстрыб'ютара.