Ohaus Adventurer AX423 Precision Balance

1. Уводзіны

This manual provides essential information for the proper installation, operation, and maintenance of your Ohaus Adventurer AX423 Precision Balance. Please read this manual thoroughly before using the balance to ensure accurate results and safe operation. The Ohaus Adventurer AX423 is a high-precision laboratory balance designed for accurate weighing in various scientific and industrial applications.

Figure 1: Ohaus Adventurer AX423 Precision Balance. This image displays the overall design of the Ohaus Adventurer AX423 Precision Balance, including its display, keypad, and weighing pan with a draft shield.

2. Інфармацыя па бяспецы

Always observe the following safety precautions to prevent injury and damage to the balance:

• Прачытайце ўсе інструкцыі перад выкарыстаннем.
• Use the balance only for its intended purpose as described in this manual.
• Пераканайцеся, што аб'ём блока харчаванняtage matches the requirements specified on the balance or power adapter.
• Do not operate the balance in hazardous environments or where explosive gases or vapors are present.
• Avoid spilling liquids on the balance. If a spill occurs, disconnect power immediately and clean thoroughly.
• Do not attempt to service the balance yourself. Refer all servicing to qualified personnel.
• Keep the weighing pan and surrounding area clean and free from obstructions.

3. Змесціва ўпакоўкі

Пры распакаванні пераканайцеся, што ўсе кампаненты наяўныя:

• Ohaus Adventurer AX423 Precision Balance unit
• Вагой
• Draft shield (if applicable)
• Адаптар сілкавання
• Кіраўніцтва карыстальніка (гэты дакумент)

Калі якія-небудзь тавары адсутнічаюць або пашкоджваюцца, неадкладна звярніцеся да пастаўшчыка.

4. Настройка

4.1 Распакаванне

Carefully remove the balance from its packaging. Retain the packaging material for future transport or storage.

4.2 Размяшчэнне

Place the balance on a stable, level surface free from vibrations, drafts, and direct sunlight. Avoid locations near air conditioning vents, open windows, or heavy machinery that could affect weighing accuracy. Ensure sufficient space around the balance for operation and maintenance.

4.3 Зборка

1. Place the weighing pan securely onto the pan support.
2. If your model includes a draft shield, assemble it according to the diagrams provided in the quick start guide (if separate) or by carefully placing the glass panels into their designated slots.

4.4 Выраўноўванне

The balance must be perfectly level for accurate measurements. Use the two leveling feet located at the rear of the balance and the bubble indicator (level indicator) usually found near the display. Adjust the feet until the bubble is centered within the circle.

4.5 Падключэнне харчавання

Connect the supplied AC power adapter to the power input port on the rear of the balance. Plug the adapter into a suitable electrical outlet. Allow the balance to warm up for at least 30 minutes after connecting power for optimal performance.

5. Інструкцыя па эксплуатацыі

5.1 Уключэнне/выключэнне сілкавання

Націсніце [ВКЛ/ВЫКЛ] button to turn the balance on or off. The display will show a self-test sequence upon startup.

5.2 Асноўнае ўзважванне

1. Ensure the weighing pan is empty and clean.
2. Націсніце [НОЛЬ] button to set the display to zero.
3. Carefully place the item to be weighed onto the center of the weighing pan.
4. Wait for the stability indicator (usually a star or circle) to appear on the display, then read the weight value.

5.3 Функцыя тары

To weigh an item in a container, use the tare function:

1. Пастаўце пустую ёмістасць на платформу ўзважвання.
2. Націсніце [ТАРА] button. The display will return to zero.
3. Дадайце прадмет, які трэба ўзважваць, у кантэйнер. На дысплеі будзе паказана чыстая вага прадмета.

5.4 Выбар блока

Націсніце [БЛОК] button to cycle through available weighing units (e.g., grams (g), milligrams (mg), carats (ct), ounces (oz), etc.). The currently selected unit will be displayed.

5.5 Каліброўка

For optimal accuracy, regular calibration is recommended. The Adventurer AX423 features internal calibration. Refer to the on-screen prompts or the full technical manual for detailed calibration procedures. External calibration with certified weights may also be performed.

6. Тэхнічнае абслугоўванне

6.1 Ачыстка

Clean the balance regularly using a soft cloth dampened with a mild detergent or isopropyl alcohol. Do not use abrasive cleaners, solvents, or harsh chemicals. Ensure no liquids enter the balance housing. The weighing pan and draft shield components can be removed for more thorough cleaning.

6.2 Calibration Checks

Perform routine calibration checks using certified reference weights to ensure continued accuracy. The frequency of these checks depends on your application's requirements and regulatory standards.

6.3 Захоўванне

When not in use for extended periods, disconnect the power adapter and store the balance in a clean, dry, and stable environment, preferably in its original packaging.

7. Выпраўленне непаладак

If you encounter issues with your balance, consult the table below for common problems and solutions:

If the problem persists after attempting these solutions, contact Ohaus customer support.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

9.1 Інфармацыя аб гарантыі

The Ohaus Adventurer AX423 Precision Balance comes with a 2-year limited warranty from the date of purchase, covering defects in materials and workmanship. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accidents, unauthorized service, or improper installation.

9.2 Падтрымка кліентаў

For technical assistance, service, or warranty inquiries, please contact Ohaus customer support. Visit the official Ohaus webсайт для кантактнай інфармацыі і дадатковых рэсурсаў.