Прадукт скончаныview
The Fluidmaster 400CARP5 PerforMAX No Tank Removal Kit is designed to improve the performance of poorly functioning or outdated toilets. This kit includes the quiet and powerful PerforMAX toilet fill valve, along with a water-saving flush valve repair kit. The flush kit features a 555C 2-inch toilet flapper with adjustable water usage and a peel-and-stick design for easy installation. Its universal design ensures compatibility with most toilet models, enhancing overall toilet performance. The kit is built with highly durable, corrosive-resistant materials and features a solid frame flapper for a proper seal, extending its lifespan.
выява: The Fluidmaster PerforMAX Universal Toilet Fill and Flush Valve Repair Kit, showing the fill valve, flapper, and associated components.
Відэа: Гэта відэа прадстаўляе прадукт больш чымview of the Fluidmaster PerforMAX Universal Toilet Fill and Flush Valve Repair Kit, highlighting its features and components.
Камплектуючыя
The Fluidmaster 400CARP5 kit includes the following components:
- PerforMAX Toilet Fill Valve: A high-performance, quiet, and powerful fill valve.
- 555C 2-inch Toilet Flapper: A solid frame flapper designed for a proper seal and adjustable water usage.
- Flush Valve Repair Kit: Includes the flapper and seal for water-saving performance.
- Installation Hardware: Necessary nuts, washers, and clips for secure installation.
- Refill Tube and Clip: For proper bowl refill during the flush cycle.
выява: All components of the Fluidmaster PerforMAX kit laid out, including the fill valve, flapper, refill tube, and various nuts and washers.
выява: Буйны план view of the Fluidmaster PerforMAX fill valve, highlighting its adjustable height mechanism and refill tube connection.
выява: Буйны план view of the Fluidmaster 555C 2-inch flapper, showing its adjustable dial for water usage and the chain for connection to the tank lever.
Інфармацыя па бяспецы
Always turn off the water supply to the toilet before beginning any repair or maintenance. Flush the toilet to drain the tank. Wear appropriate personal protective equipment, such as gloves and eye protection, if necessary. If you are unsure about any step, consult a qualified plumber.
Інструкцыя па ўстаноўцы
Відэа: This comprehensive video demonstrates the step-by-step installation process for the Fluidmaster PerforMAX Universal Toilet Fill and Flush Valve Repair Kit.
1. Падрыхтоўка да ўстаноўкі
- Зніміце вечка бачка ўнітаза.
- Mark the current water level inside the tank for reference.
- Turn off the water supply to the toilet at the shut-off valve located near the base of the toilet.
- Flush the toilet to drain the tank completely. Hold the flush lever down until all water has drained.
- Use a sponge or towel to remove any remaining water from the tank.
- Place a bucket or towel under the toilet's water supply line connection to catch any residual water.
- Disconnect the water supply line from the bottom of the old fill valve.
выява: A detailed diagram showing the steps for installing the Fluidmaster PerforMAX kit, including preparation, fill valve installation, and flush valve installation.
2. Remove Old Components
- Disconnect the flapper chain from the tank lever.
- Remove the old flapper from the flush valve overflow pipe.
- Unscrew the lock nut from the bottom of the old fill valve.
- Remove the old fill valve from the toilet tank.
3. Install New PerforMAX Fill Valve
- Ensure the shank washer is flat side up on the threaded shank of the new fill valve.
- Insert the new fill valve into the hole at the bottom of the toilet tank.
- From underneath the tank, hand-tighten the lock nut onto the threaded shank of the fill valve. НЕ ЗАЦЯГАЙЦЕ.
- Adjust the height of the fill valve. The top of the fill valve cap should be approximately 3 inches above the top of the overflow pipe. To adjust, hold the bottom shank and twist the upper portion counter-clockwise to increase height, or clockwise to decrease height. Do not move the lock ring during this adjustment.
- Attach the refill tube to the small port on the top of the fill valve.
- Clip the other end of the refill tube to the right side of the overflow pipe.
4. Install New Flapper
- Clean the flush valve seat thoroughly with warm, soapy water. Rinse and dry.
- Peel the paper backing from the new flapper's adhesive.
- Position the flapper's hinge section in the green "OK" zones, either above 3 o'clock or 9 o'clock, as indicated on the flapper. Apply firm pressure to secure it to the flush valve seat.
- Connect the flapper chain to the tank lever, ensuring there is slight slack when the flapper is closed.
5. Connect Water Supply and Test
- Reconnect the water supply line to the new fill valve. Hand-tighten the plastic nut only; НЕ ЗАЦЯГАЙЦЕ.
- Slowly turn on the water supply valve. Allow the tank to fill. Check for any leaks.
- Once the tank is full, flush the toilet several times to ensure proper operation and check for leaks.
Інструкцыя па эксплуатацыі
Рэгуляванне ўзроўню вады ў баку
The PerforMAX fill valve allows you to adjust the water level in the tank for optimal performance and water savings. To adjust, turn the adjustment screw on the top of the fill valve clockwise to raise the water level or counter-clockwise to lower it. The water level should be approximately 1 inch below the top of the overflow pipe or at the marked water line in your tank.
Adjusting Bowl Refill (Roller Clamp)
Ролік clamp on the refill tube controls the amount of water that refills the toilet bowl after each flush. This feature helps optimize water usage.
- To increase the bowl refill amount (for more powerful flush), roll the dial on the roller clamp towards higher numbers.
- To decrease the bowl refill amount (for water savings), roll the dial on the roller clamp towards lower numbers.
- Adjust until the water in the bowl reaches the desired level, typically just below the rim of the bowl.
Тэхнічнае абслугоўванне
Regular maintenance ensures the longevity and efficiency of your Fluidmaster PerforMAX kit:
- Перыядычная чыстка: Inspect the fill valve and flapper for mineral buildup or debris every 6-12 months. Clean with a soft brush and mild, non-abrasive cleaner if necessary.
- Flapper Seal Check: Ensure the flapper creates a tight seal. If you notice a slow leak or constant running, the flapper seal might be compromised.
- Праверка ўзроўню вады: Periodically verify that the tank water level is set correctly to prevent water waste.
Ліквідацыю непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Toilet runs continuously. | Flapper not sealing properly; fill valve set too high; refill tube too far into overflow pipe. | Ensure flapper is seated correctly. Adjust tank water level. Ensure refill tube is not siphoning water. |
| Слабы румянец. | Tank water level too low; flapper closing too quickly. | Adjust tank water level higher. Adjust roller clamp to allow more bowl refill. |
| Slow tank fill. | Partially closed water supply valve; debris in fill valve. | Fully open water supply valve. Turn off water, remove fill valve cap, and check for debris. |
| Water hammer (loud noise when tank fills). | High water pressure; loose pipes. | Install a water hammer arrestor. Secure loose pipes. |
Тэхнічныя характарыстыкі
- матэрыял: Пластыкавыя
- Марка: Fluidmaster
- Нумар мадэлі: 400CARP5
- Памеры прадмета (Д х Ш х У): 17 х 7 х 14 цалі
- Вага прадмета: 9.6 унцый
- Тып разеткі: Фланец
- Памер разеткі: 2 цалі
- Максімальны працоўны ціск: 80 PSI
- Тып клапана: Паплавок клапан
- Колькасць адзінак: 1.0 Граф
- Тэхнічныя характарыстыкі выкананы: ASME A112.18.2
- UPC: 039961013248
Гарантыя і падтрымка
This Fluidmaster PerforMAX kit includes a 5-year warranty. For technical support, replacement parts, or warranty claims, please refer to the contact information provided on the product packaging or visit the official Fluidmaster webсайт. Захоўвайце чэк аб куплі для пацверджання гарантыі.
выява: The Fluidmaster 60th Diamond Jubilee logo, indicating the brand's long-standing history.