1. Уводзіны
This manual provides essential information for the safe and correct installation, operation, and maintenance of your DB Electrical 410-44135 Starter. Please read these instructions thoroughly before attempting any installation or service. Retain this manual for future reference.
2. Інфармацыя па бяспецы
Заўсёды выконвайце наступныя меры бяспекі, каб пазбегнуць траўмаў або пашкоджанняў:
- Disconnect the vehicle's battery before beginning any work on the electrical system to prevent electrical shock or short circuits.
- Карыстайцеся адпаведнымі сродкамі індывідуальнай абароны (СІЗ), у тым ліку ахоўнымі акулярамі і пальчаткамі.
- Ensure the vehicle is on a stable, level surface and properly supported if lifted.
- Звярніцеся да кіраўніцтва па абслугоўванні вашага аўтамабіля, каб даведацца пра канкрэтныя працэдуры і патрабаванні да крутоўнага моманту.
- Не дапускайце дзяцей і старонніх асоб да рабочай зоны.
- Гэты прадукт утрымлівае хімічныя рэчывы, якія, як вядома ў штаце Каліфорнія, выклікаюць рак і прыроджаныя дэфекты або іншыя парушэнні рэпрадуктыўнай функцыі (папярэджанне Прапановы 65). Будзьце асцярожныя і мыйце рукі пасля выкарыстання.
3. Прадукт скончыўсяview
The DB Electrical 410-44135 is an aftermarket starter designed to meet OEM specifications for various applications. It is a 12-volt, 9-tooth, 1.2 KW Direct Drive (DD) starter with clockwise rotation.
3.1. Ключавыя кампаненты
- Саленоід: Engages the starter drive and supplies power to the motor.
- Матор: Provides rotational force to crank the engine.
- Drive Gear (Pinion): Engages with the engine's flywheel to start the engine.
- Мантажны фланец: Secures the starter to the engine block.
3.2. Visual Reference
Малюнак 1: бок view of the DB Electrical 410-44135 Starter, showing the solenoid, motor, and mounting points.
Малюнак 2: Пад вуглом view of the starter, highlighting the electrical terminals and rear casing.
4. Сумяшчальнасць
This starter is compatible with the following vehicle models. Always verify the part fits your specific application before installation.
- Atlas: 404 (1995-1999)
- Форд: 1310 (1983-1986), 1510 (1983-1986), CL25 (1983-1986)
- New Holland: 1310 (1983-1986), 1510 (1983-1986), CL25 (1983-1986)
Replaces OEM Numbers:
- API Marine: 17031
- Arrowhead: SHI0101, 243-12120, S114-381N
- Cargo: 110552
- Ford: SBA18508-6321
- Hitachi: S114-381
- Ishikawajima: 18508-6321
- J & N: 410-44135
- JCB: 02/630500
- Lester: 17300
- New Holland: SBA18508-6321
- O&K (Orenstein & Koppel): 1447724
- ONAN: 185-2166
- PEL JOB: E185086321
- Perkins: 185086321
- Schaeff INC: 5568656721, 5999999561
- Weidemann: 5747001132, 5747001133, 5747086321
- Zeppelin: 9SX9766
5. Ўстаноўка
Installation of the starter requires mechanical aptitude and basic tools. If you are unsure about any step, consult a qualified mechanic.
- Падрыхтуйце аўтамабіль:
- Пераканайцеся, што транспартны сродак выключаны, а стаяначны тормаз уключаны.
- Disconnect the negative (-) battery cable first, then the positive (+) battery cable.
- If necessary, lift the vehicle using a jack and secure it with jack stands.
- Знайдзіце стары стартар: Identify the existing starter motor on your vehicle. It is typically mounted to the engine block near the transmission.
- Адключыце праводку:
- Carefully disconnect the main battery cable from the starter solenoid terminal.
- Disconnect the smaller ignition switch wire from the solenoid. Note the position of each wire for correct reinstallation.
- Зніміце мацавальныя балты: Remove the bolts securing the old starter to the engine block. Support the starter as you remove the last bolt to prevent it from falling.
- Выдаліць стары стартар: Carefully maneuver and remove the old starter from its mounting location.
- Усталяваць новы стартар:
- Position the new DB Electrical 410-44135 starter into place.
- Align the mounting holes and hand-tighten the mounting bolts.
- Once aligned, tighten the mounting bolts to the manufacturer's specified torque (refer to your vehicle's service manual).
- Падключэнне праводкі:
- Reconnect the ignition switch wire to the appropriate solenoid terminal.
- Reconnect the main battery cable to the main solenoid terminal. Ensure all connections are clean and secure.
- Паўторнае падключэнне батарэі: Зноў падключыце станоўчы (+) кабель акумулятара, а затым адмоўны (-) кабель акумулятара.
- Тэставая аперацыя: Attempt to start the vehicle. Listen for proper starter engagement and engine cranking.
Малюнак 3: Задняя частка view of the starter, showing the electrical connection points for the battery cable and ignition wire.
Малюнак 4: Спераду view of the starter, displaying the drive gear (pinion) which engages with the engine's flywheel.
6. Аперацыя
The starter motor is an integral part of your vehicle's starting system. When the ignition key is turned to the "START" position, electrical current flows to the starter solenoid. The solenoid then engages the starter drive gear with the engine's flywheel and simultaneously sends power to the starter motor. The motor rotates the flywheel, cranking the engine until it starts. Once the engine starts, the ignition key should be released, and the starter disengages from the flywheel.
Avoid prolonged cranking (more than 10-15 seconds) to prevent overheating the starter. Allow a brief cool-down period between starting attempts.
7. Тэхнічнае абслугоўванне
The DB Electrical 410-44135 Starter is designed for minimal maintenance. However, periodic checks can help ensure its longevity and reliable operation:
- Праверце злучэнні: Periodically check all electrical connections to the starter for corrosion or looseness. Clean any corrosion and tighten connections as needed.
- Стан батарэі: Ensure your vehicle's battery is in good condition and fully charged. A weak battery can put excessive strain on the starter.
- Цэласнасць кабеля: Inspect battery cables and starter cables for fraying, cracks, or damage. Replace damaged cables promptly.
8. Выпраўленне непаладак
Калі ў вас узніклі праблемы са стартарам, разгледзьце наступныя распаўсюджаныя праблемы і рашэнні:
| Сімптом | Магчымая прычына | Рашэнне |
|---|---|---|
| Starter clicks but engine does not crank. | Weak battery, loose battery cables, faulty solenoid, or seized engine. | Check battery charge and terminals. Inspect battery cables. If battery is good, test solenoid or starter motor. |
| Starter cranks slowly. | Low battery charge, corroded battery terminals, or high resistance in starter circuit. | Charge or replace battery. Clean battery terminals. Inspect starter cables for corrosion or damage. |
| Starter spins but engine does not crank. | Faulty starter drive (bendix) or damaged flywheel teeth. | Inspect starter drive gear and flywheel for damage. Replacement of starter may be necessary. |
| No response when turning ignition key. | Dead battery, faulty ignition switch, blown fuse, or open circuit in starter wiring. | Праверце аб'ём батарэіtage. Inspect fuses related to starting system. Test ignition switch. Verify all wiring connections. |
Калі дзеянні па ліквідацыі непаладак не дапамаглі вырашыць праблему, рэкамендуецца звярнуцца да прафесійнага механіка.
9. Тэхнічныя характарыстыкі
| Асаблівасць | Спецыфікацыя |
|---|---|
| Тып адзінкі | Стартар |
| тtage | 12 вольт |
| Кручэнне | Па гадзіннікавай стрэлцы (CW) |
| Зубы | 9 |
| Магутнасць (КВт) | 1.2 кВт |
| Стартавы тып | Direct Drive (DD) |
| Вага прадмета | 7.65 фунта |
| Памеры прадукту (Д х Ш х У) | 9.5 х 5.5 х 5.5 цалі |
| Нумар дэталі вытворцы | 410-44135 |
| UPC | 701485503160 |
10. Гарантыя і падтрымка
DB Electrical provides a Гарантыя 1 год on this product from the date of purchase. This warranty covers defects in materials and workmanship under normal use. If the product fails within one year of your order, DB Electrical will replace it.
For warranty claims, technical assistance, or support, please contact DB Electrical customer service. Refer to your purchase documentation for contact details or visit the official DB Electrical webсайт.
Note: The warranty does not cover damage caused by improper installation, misuse, neglect, accident, or unauthorized modification.