CISA 1C141603044 Smart Plus 2 Door Closer, Black - Instruction Manual

1. Уводзіны

This manual provides detailed instructions for the installation, operation, and maintenance of your CISA Smart Plus 2 Door Closer. Please read these instructions carefully before installation and use to ensure proper function and longevity of the product.

The CISA Smart Plus 2 is a high-quality door closer designed for various door materials, offering adjustable closing force and speed, along with a hold-open function for convenience.

Асноўныя характарыстыкі:

• Suitable for installation on doors of any material.
• Adjustable closing force EN 2-4, suitable for doors up to 80 kg and 1100 mm wide.
• Independent valves for regulating closing speed and final snap force.
• Stable hold-open position thanks to the adjustable steel arm.
• Rounded ABS casinдызайн g.

2. Інфармацыя па бяспецы

Заўсёды выконвайце наступныя меры бяспекі падчас усталёўкі і эксплуатацыі:

• Ensure the door closer is installed by a qualified professional if you are unsure about the process.
• Use appropriate tools and personal protective equipment (PPE) during installation.
• Do not attempt to modify the door closer or its components.
• Keep children and pets away from the door during installation and adjustment.
• Verify that all screws and fasteners are securely tightened after installation.

3. Уключаныя кампаненты

Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты прысутнічаюць у камплекце:

• CISA Smart Plus 2 Door Closer unit
• Arm with hold-open function
• Крапежныя шрубы
• Шаблон для свідравання
• Інструкцыя па ўсталёўцы (гэтае кіраўніцтва)

Малюнак 3.1: CISA Smart Plus 2 Door Closer with its main components.

4. Настройка і ўстаноўка

The CISA Smart Plus 2 door closer can be installed in various configurations (standard, parallel arm, top jamb). Refer to the drilling template for precise hole placement based on your chosen installation type and door swing.

Этапы ўстаноўкі:

1. Prepare the Door and Frame: Determine the mounting position on the door or frame. Use the provided drilling template to mark the screw holes accurately.
2. Прасвідраваць пілотныя адтуліны: Drill pilot holes at the marked positions. Ensure the drill bit size is appropriate for the mounting screws to prevent stripping or cracking.
3. Усталюйце корпус даводчыка дзвярэй: Secure the main body of the door closer to the door or frame using the provided mounting screws. Ensure it is firmly attached and level.
4. Attach the Arm Assembly:
   

   Малюнак 4.1: Detail of the adjustable steel arm with hold-open.

   Attach the main arm to the door closer spindle. Then, attach the forearm to the door frame (for standard installation) or to the door (for parallel arm installation). Ensure the arm is correctly oriented according to the installation diagram in the drilling template.

5. Connect the Arm Sections: Connect the two sections of the arm using the provided fasteners. Adjust the length of the arm if necessary to ensure it is perpendicular to the door frame when the door is closed.
6. Пачатковая карэкціроўка: Perform initial adjustments for closing speed and final snap as described in the "Operating Instructions" section.

Малюнак 4.2: Approximate dimensions of the CISA Smart Plus 2 Door Closer for installation planning.

5. Інструкцыя па эксплуатацыі і рэгуляванні

The CISA Smart Plus 2 door closer features independent valves for precise control over door closing behavior and a hold-open function.

Adjusting Closing Speed and Final Snap:

Малюнак 5.1: Location of the adjustment valves on the door closer body.

• Valve 1 (Closing Speed): This valve controls the main closing speed of the door from its fully open position until approximately 15 degrees from closed. Turn clockwise to decrease speed (slower closing) and counter-clockwise to increase speed (faster closing). Make small adjustments and test the door's movement.
• Valve 2 (Final Snap/Latching Speed): This valve controls the speed of the door for the last 10-15 degrees of closing, providing a "snap" to ensure the latch engages. Turn clockwise to decrease the final snap force and counter-clockwise to increase it. Adjust this to ensure the door closes securely without slamming.

Adjusting the Hold-Open Function:

The adjustable steel arm allows the door to be held open at a desired position. This is typically adjusted using a screw or mechanism on the arm itself. Refer to the specific diagram on your drilling template for the exact adjustment point.

• To engage the hold-open, open the door to the desired angle.
• Tighten the hold-open mechanism on the arm to secure the door in that position.
• To release, simply push the door further open or pull it slightly closed, depending on the mechanism type.
• If the hold-open function becomes weak or unreliable, check the tightness of the adjustment screw on the arm.

6. Тэхнічнае абслугоўванне

Regular maintenance ensures the optimal performance and longevity of your CISA Smart Plus 2 Door Closer.

• Уборка: Periodically wipe the door closer body and arm with a soft, damp тканінай, каб выдаліць пыл і бруд. Пазбягайце абразіўных ачышчальнікаў.
• змазка: The internal mechanism is factory-lubricated and generally does not require additional lubrication. If the arm joints become stiff, a small amount of silicone-based lubricant can be applied to the pivot points.
• агляд: Annually inspect all mounting screws and fasteners for tightness. Re-tighten if necessary. Check the arm for any signs of wear or damage.
• Праверка функцыянальнасці: Periodically test the closing speed, final snap, and hold-open function to ensure they are operating correctly and adjust if needed.

7. Выпраўленне непаладак

Вось некаторыя распаўсюджаныя праблемы і іх магчымыя рашэнні:

8. Тэхнічныя характарыстыкі

9. Інфармацыя аб гарантыі

The CISA Smart Plus 2 Door Closer comes with a Гарантыя 12 месяцаў from the date of purchase. This warranty covers manufacturing defects and material faults under normal use and service conditions.

The warranty does not cover damage resulting from improper installation, misuse, abuse, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.

10. Падтрымка кліентаў

If you encounter any issues not covered in this manual or require further assistance, please contact CISA customer support. For the most up-to-date contact information, please visit the official CISA website or refer to the packaging.

When contacting support, please have your product model number (1C141603044) and proof of purchase readily available.