DINUY TI LXO BAT

DINUY Luxor TI LXO BAT Doorbell Chime User Manual

Model: TI LXO BAT

1. Уводзіны

Thank you for choosing the DINUY Luxor TI LXO BAT Doorbell Chime. This electromechanical chime offers a clear 2-tone sound and can be powered by either an 8-volt AC transformer or four 1.5-volt DC batteries. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your doorbell chime.

Важная інфармацыя па бяспецы:

  • Перад устаноўкай і выкарыстаннем уважліва прачытайце ўсе інструкцыі.
  • Ensure power is disconnected at the main circuit breaker before performing any electrical work.
  • Калі вы не ўпэўненыя ў правільнасці электрычнай праводкі, мантаж павінен выконваць кваліфікаваны электрык.
  • Не падвяргайце прыладу ўздзеянню празмернай вільгаці або экстрэмальных тэмператур.
  • Use only the specified power sources (8V AC or 4 x 1.5V DC batteries).

2. Змесціва ўпакоўкі

Калі ласка, праверце ўпакоўку на наяўнасць наступных прадметаў:

  • DINUY Luxor TI LXO BAT Doorbell Chime Unit
  • Інструкцыя па эксплуатацыі (гэты дакумент)
  • Note: Batteries (4 x 1.5V) and 8V AC transformer are not included and must be purchased separately if required for your chosen power method.

3. Настройка і ўстаноўка

The DINUY Luxor TI LXO BAT doorbell chime offers two power options: 8V AC wired connection or 4 x 1.5V DC battery operation. Choose the method that best suits your installation requirements.

3.1. Battery Installation (DC Power)

  1. Open the Chime Unit: Carefully open the housing of the doorbell chime. The top part is white, and the bottom part is black.
  2. Устаўце батарэі: Locate the battery compartment. Insert four (4) 1.5-volt batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  3. Зачыніце блок: Securely close the chime unit housing.
  4. Мантаж: Choose a suitable location for the chime unit, away from direct moisture. Use appropriate screws (not included) to mount the unit securely to a wall. The dimensions are 105 x 170 x 44.5 mm.
  5. Connect Doorbell Push Button: Connect your existing or new doorbell push button (not included) to the designated terminals on the chime unit. Refer to the wiring diagram (if provided with the physical product) for specific terminal connections.

3.2. Wired Installation (8V AC Power)

  1. Адключыць харчаванне: Before starting, ensure the main power supply to your doorbell circuit is turned OFF at the circuit breaker.
  2. Open the Chime Unit: Carefully open the housing of the doorbell chime.
  3. Connect Transformer Wires: Connect the 8-volt AC transformer wires (not included) to the designated terminals on the chime unit. Ensure a secure connection. Refer to the wiring diagram (if provided with the physical product) for specific terminal connections.
  4. Connect Doorbell Push Button: Connect your existing or new doorbell push button (not included) to the designated terminals on the chime unit.
  5. Зачыніце блок: Securely close the chime unit housing.
  6. Мантаж: Choose a suitable location for the chime unit. Use appropriate screws (not included) to mount the unit securely to a wall. The dimensions are 105 x 170 x 44.5 mm.
  7. Аднавіць сілу: Once all connections are secure and the unit is mounted, restore power at the circuit breaker.
DINUY Luxor TI LXO BAT Doorbell Chime, white top and black bottom, showing its compact size.

Figure 1: The DINUY Luxor TI LXO BAT doorbell chime unit. This image displays the compact design with a white upper section and a black lower section, highlighting its overall appearance and size.

4. Інструкцыя па эксплуатацыі

Once installed and powered, the DINUY Luxor TI LXO BAT doorbell chime operates automatically when the connected doorbell push button is pressed.

  • Press the doorbell push button.
  • The chime unit will produce a 2-tone electromechanical sound.
  • The sound volume is approximately 75 dB.

5. Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and proper functioning of your doorbell chime.

  • Уборка: Wipe the exterior of the chime unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Battery Replacement (for DC powered units): If the chime sound becomes weak or stops working, it may be time to replace the batteries. Open the unit as described in Section 3.1, remove the old batteries, and insert four new 1.5-volt batteries, observing correct polarity. Dispose of old batteries responsibly.
  • Wiring Check (for AC powered units): Periodically check the wiring connections for any signs of corrosion or looseness. Ensure power is off before inspecting wiring.

6. Выпраўленне непаладак

If you encounter issues with your doorbell chime, refer to the following troubleshooting guide:

праблемаМагчымая прычынаРашэнне
Chime does not sound.
  • No power (AC or DC).
  • Няшчыльнае злучэнне правадоў.
  • Faulty doorbell push button.
  • Dead batteries (DC unit).
  • Check power supply (circuit breaker for AC, batteries for DC).
  • Inspect and secure all wiring connections (power off for AC).
  • Test the push button or replace it.
  • Заменіце батарэі на новыя.
Chime sounds weak or distorted.
  • Low battery power (DC unit).
  • Недастатковы абtage from transformer (AC unit).
  • Заменіце батарэі.
  • Ensure the transformer provides a stable 8V AC.
Chime sounds continuously.
  • Stuck doorbell push button.
  • Кароткае замыканне ў праводцы.
  • Check and free the push button.
  • Inspect wiring for damage or short circuits (power off for AC).

7. Тэхнічныя характарыстыкі

мадэльLuxor TI LXO BAT
ТыпElectromechanical Doorbell Chime, 2-tone
Электразабеспячэнне8V AC or 4 x 1.5V DC Batteries
Аб'ёмПрыблізна 75 дБ
Матэрыял корпусаПластыкавыя
Колер корпусаWhite (top), Black (bottom)
Памеры (В х Ш х Г)105 х 170 х 44.5 мм
ВытворцаДЗІНУЙ

8. Гарантыя і падтрымка

DINUY products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or contact your local DINUY distributor or retailer. For technical support or further assistance, please visit the official DINUY webсайт або звярніцеся ў іх аддзел абслугоўвання кліентаў.

Калі ласка, захавайце гэта кіраўніцтва для выкарыстання ў будучыні.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.