Red Lion 97081001

Red Lion RL-SWJ100 1 HP Shallow Well Jet Pump Instruction Manual

Мадэль: 97081001

1. Уводзіны

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Red Lion RL-SWJ100 1 HP Cast Iron Shallow Well Jet Pump. Please read these instructions thoroughly before attempting to install or operate the pump. Retain this manual for future reference.

Red Lion RL-SWJ100 1 HP Shallow Well Jet Pump, red cast iron body with black motor housing.
Figure 1: Red Lion RL-SWJ100 1 HP Shallow Well Jet Pump

2. Інфармацыя па бяспецы

WARNING: Risk of severe injury or death by electrical shock, or damage to the system.

  • Заўсёды адключайце электрычнасць, перш чым дакранацца да помпы.
  • A Ground Fault Circuit Interrupter (GFCI) is required for electrical connections.
  • Калі сеткавы шнур пашкоджаны, яго павінен замяняць толькі кваліфікаваны персанал.
  • Installation and servicing of this equipment should be performed by technically qualified personnel familiar with the correct selection and use of appropriate tools, equipment, and procedures.
  • Гэты прадукт можа ўтрымліваць у вас хімічныя рэчывы, у тым ліку свінец, які, як вядома ў штаце Каліфорнія, выклікае рак і прыроджаныя дэфекты або іншыя рэпрадуктыўныя парушэнні. Для атрымання дадатковай інфармацыі перайдзіце па спасылцы www.P65Warnings.ca.gov.
A person wearing blue work clothes and gloves is handling electrical wires, emphasizing the need for electrical experience.
Figure 2: Electrical experience is required for installation.

3. Прадукт скончыўсяview

The Red Lion RL-SWJ100 is a 1 HP cast iron shallow well jet pump designed for providing fresh water to rural homes, farms, and cottages. It is suitable for suction lifts down to 25 feet. The pump includes a 30/50 pressure switch and is self-priming after initial prime.

Асноўныя характарыстыкі:

  • Shallow Well Application: Designed for wells less than 25 feet deep.
  • Двайны томtagРухавік: Heavy-duty 115/230 Volt motor, factory-set for 230 Volts, easily switchable to 115 Volts.
  • Трывалая канструкцыя: Heavy-duty cast iron casing for longevity. Impeller and volute are made of glass-filled thermoplastic.
  • Integrated Pressure Switch: Includes a 30/50 pressure switch with auto shut-off.
  • Сувязі: 1-1/4-inch Female NPT threaded intake; 1-inch Female NPT threaded discharge.
Diagram showing the internal components and features of the Red Lion RL-SWJ series shallow well jet pump, including motor terminal box, adjustable pressure switch, 1 inch FNPT discharge, 1-1/4 inch FNPT intake, cast iron casing, glass-filled thermoplastic impeller and diffuser, and integrated venturi/nozzle assembly.
Figure 3: RL-SWJ Series Features Diagram

4. Тэхнічныя характарыстыкі

АтрыбутКаштоўнасць
Нумар мадэлі97081001
Конская сіла (HP)1 HP
тtage115/230 вольт (падвойны вольт)tage)
Ampэраж13.2 Amps @ 115V; 6.6 Amps @ 230В
Ватtage4800 ват
Максімальны расход17 галона ў хвіліну (GPM)
Максімальны ціск74 PSI
Suction/Intake1-1/4-inch Female NPT
Разрад1-inch Female NPT
МатэрыялCast Iron (body), Glass-filled thermoplastic (impeller/volute)
Памеры прадукту (Д х Ш х У)14 см Д х 9 см Ш х 9.5 см В
Вага прадмета28.5 фунта
Уключаныя кампаненты30/50 Pressure Switch, Instruction Manual, Pump
Performance chart for Red Lion RL-SWJ100 shallow well jet pump, showing total dynamic head versus capacity in US GPM at 5 feet of lift for 1/2 HP, 3/4 HP, and 1 HP models.
Figure 4: RL-SWJ100 Performance Chart
Dimensional drawing of the Red Lion RL-SWJ100 shallow well jet pump with height, length, width, and weight specifications.
Figure 5: RL-SWJ100 Dimensions

5. Настройка і ўстаноўка

5.1 томtagе Выбар

The RL-SWJ100 pump is dual voltage (115/230 Volts) and comes factory-set for 230 Volts. Ensure the pump's voltage setting matches your power source. To change the voltage, remove the cover from the motor terminal box and slide the voltage indicator switch to the desired setting (115V or 230V) using a flat screwdriver.

Diagram illustrating the voltage switch on the Red Lion RL-SWJ series pump, showing positions for 230V and 115V settings.
Малюнак 6: Voltage Switch Settings

Video 1: This video demonstrates how to change the voltage setting on a Red Lion RL-SWJ Series Jet Pump from 230V to 115V or vice versa.

5.2 Pressure Tank Installation

If installing with a pressure tank, ensure the tank's pre-charge pressure is set correctly before installation. The pre-charge pressure should be 2 PSI below the pump's cut-in pressure setting (e.g., 28 PSI for a 30 PSI cut-in). Make all pipe connections according to local plumbing codes. Ensure the pipe size from the tank to the house is the same as the pipe size from the pump to the tank.

Video 2: This video provides instructions on how to install or adjust a pressure tank in conjunction with a jet pump system.

6. Інструкцыя па эксплуатацыі

6.1 Запраўка помпы

Before starting the pump for the first time or after it has been drained, it must be properly primed. This involves filling the pump casing and suction line with water to ensure it can create the necessary suction to draw water from the well. Refer to the detailed priming instructions in the full owner's manual for your specific setup.

6.2 Першапачатковы запуск

After priming and ensuring all connections are secure and leak-free, restore power to the pump. The pump should start and build pressure. Monitor the pressure gauge to ensure it reaches the desired cut-off pressure (e.g., 50 PSI for a 30/50 switch). The pump will automatically shut off once the cut-off pressure is reached.

7. Тэхнічнае абслугоўванне

  • Рэгулярны агляд: Перыядычна правярайце ўсе злучэнні на наяўнасць уцечак і пераканайцеся, што помпа надзейна ўсталяваны.
  • Праверка рэзервуара пад ціскам: Verify the pressure tank's air charge annually.
  • Зімоўка: In freezing climates, drain the pump and piping completely to prevent damage from ice expansion.
  • Чысціня: Keep the pump area clean and free from debris to ensure proper ventilation.

8. Выпраўленне непаладак

This section provides general guidance for common issues. For detailed troubleshooting steps, consult the complete owner's manual.

Агульныя праблемы:

  • Pump runs but no water: Check for proper priming, ensure the suction line is submerged, and inspect for air leaks in the suction line.
  • Занадта часта працуе помпа: This often indicates a problem with the pressure tank (low air charge, waterlogged) or a leak in the system.
  • Помпа не запускаецца: Verify electrical connections, check the circuit breaker, and ensure the voltage switch is set correctly.
  • Нізкі ціск: Check for clogs in the piping, inspect the impeller for damage, and verify the well's water level.

9. Гарантыя і падтрымка

9.1 Інфармацыя аб гарантыі

The Red Lion RL-SWJ100 pump comes with a 2-year manufacturer's warranty. For specific terms and conditions, please refer to the warranty details provided with your product or contact Red Lion customer support.

9.2 Падтрымка кліентаў

For troubleshooting assistance, installation guidance, or to inquire about parts and service, please contact Red Lion customer support. If your product was purchased within 30 days, refer to Amazon's return policy. For purchases beyond 30 days, consult your owner's manual or contact the seller directly if different from Amazon.com.

For additional information, visit the official Red Lion webсайт: www.redlionproducts.com