FERMAX CITY 1L Color Video Door Entry Kit User Manual

1. Уводзіны

This user manual provides comprehensive instructions for the installation, operation, and maintenance of the FERMAX CITY 1L Color Video Door Entry Kit. Please read this manual carefully before attempting to install or operate the device to ensure proper functionality and safety.

The FERMAX CITY 1L Color Video Door Entry Kit is a high-quality and durable intercom system designed to enhance security and communication at your entrance. It features a color video camera for visual identification and a robust design for long-lasting performance.

2. Інфармацыя па бяспецы

Always adhere to local electrical codes and regulations during installation. Disconnect power before performing any installation or maintenance procedures. Do not expose the unit to excessive moisture or extreme temperatures. Only use original FERMAX replacement parts.

• Перад устаноўкай пераканайцеся, што сілкаванне адключана.
• Consult a qualified electrician for complex wiring.
• Не адчыняйце крышку прыладыasing unless instructed.
• Захоўваць удалечыні ад вады і прамых сонечных прамянёў.

3. Змесціва ўпакоўкі

Праверце наяўнасць усіх кампанентаў у камплекце:

• FERMAX CITY 1L Color Video Door Entry Panel
• Мантажныя шрубы і дзюбелі
• Connection Cables (if included in kit)
• Кіраўніцтва карыстальніка (гэты дакумент)

Note: Specific components may vary slightly based on the kit version.

4. Тэхнічныя характарыстыкі

5. Настройка і ўстаноўка

This section outlines the steps for installing the FERMAX CITY 1L Video Door Entry Panel. Professional installation is recommended.

5.1. Mounting the Outdoor Panel

Choose a suitable location near your entrance, ensuring it is protected from direct heavy rain and accessible for visitors. The recommended mounting height for the camera is approximately 1.5 to 1.6 meters from the ground.

1. Адзначце кропкі свідравання на сцяне з дапамогай шаблону для мацавання (калі ён ёсць).
2. Прасвідруйце адтуліны і ўстаўце дзюбелі.
3. Pass the necessary cables through the wall opening.
4. Замацуеце мантажны кранштэйн да сцяны з дапамогай шруб.

5.2. Падключэнне правадоў

Refer to the wiring diagram provided with your specific kit for detailed connection instructions. Ensure all connections are secure and correctly polarized.

Агульныя этапы падключэння:

• Падключыце блок харчавання да прызначаных клем.
• Connect the video signal cable from the outdoor panel to the indoor monitor.
• Connect the audio cables for two-way communication.
• Connect the door release mechanism (if applicable) to the appropriate terminals.

Малюнак 1: Спераду view of the FERMAX CITY 1L Color Video Door Entry Panel. This image displays the main components including the central camera with surrounding illumination, the speaker grille above it, a large illuminated nameplate holder below, and a call button at the very bottom. The panel has a brushed metal finish.

5.3. Канчатковая зборка

1. Carefully attach the outdoor panel to the mounted bracket, ensuring all cables are tucked away.
2. Secure the panel with the provided screws, typically located at the bottom or sides.
3. Аднавіць сілкаванне сістэмы.

6. Інструкцыя па эксплуатацыі

6.1. Здзяйсненне званка

To initiate a call from the outdoor panel, the visitor presses the call button. This will activate the indoor monitor and sound an alert.

6.2. Адказ на званок

When a call is received, the indoor monitor will display the visitor's image and ring. To answer, press the talk button on the indoor monitor. You can then communicate with the visitor.

6.3. Opening the Door

To open the door, press the door release button on the indoor monitor during a conversation or when viewing the outdoor panel's camera feed.

6.4. Monitoring the Entrance

Some indoor monitors allow you to manually activate the outdoor panel's camera to view the entrance area without a call being initiated. Refer to your indoor monitor's manual for this feature.

7. Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and optimal performance of your FERMAX CITY 1L system.

• Уборка: Выкарыстоўвайце мяккі, damp cloth to clean the outdoor panel. Avoid abrasive cleaners or solvents that could damage the finish or camera lens.
• агляд: Periodically check cables and connections for any signs of wear or damage. Ensure the panel is securely mounted.
• Аб'ектыў камеры: Keep the camera lens clean and free from dust or smudges for clear video quality.

8. Выпраўленне непаладак

This section addresses common issues you might encounter with your FERMAX CITY 1L system.

If the problem persists after attempting these solutions, please contact FERMAX customer support or a qualified technician.

9. Гарантыя і падтрымка

FERMAX products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or visit the official FERMAX website. For technical support, spare parts, or service inquiries, please contact your local FERMAX distributor or customer service center.

Кантактная інфармацыя:

• вытворца: ФЕРМАКС
• Webсайт: www.fermax.com
• Ідэнтыфікатар прадукту: FER48505
• ASIN: B00WGLLHZS