yueton 1-8S Lipo Battery Tester Monitor User Manual

1. паview

The yueton 1-8S Lipo Battery Tester Monitor is a compact device designed to test the working state of lithium batteries and provide a low voltage alarm. It is compatible with 1-8S Lipo, LiFe, LiMn, and Li-ion battery types. The device features a clear LED indicator for voltage display and an adjustable alarm function to prevent over-discharge.

2. Інфармацыя па бяспецы

• Always connect the battery tester to the balance lead of your battery with correct polarity. Incorrect connection can damage the device and the battery.
• Do not short-circuit the pins of the battery tester.
• Трымайце прыладу сухім і далей ад вільгаці.
• Не спрабуйце разабраць або мадыфікаваць прыладу.
• Use the tester within its specified voltage ranges (0.1V-4.5V per cell, 0.5V-36V total).
• The alarm is intentionally loud to be heard in noisy environments. Exercise caution when connecting in quiet areas.

3. Змесціва ўпакоўкі

• 1 x yueton Lipo Battery Tester Monitor

4. Асаблівасці прадукту

• Supports 1-8S Lipo/Li-ion/LiMn/Li-Fe batteries.
• тtage detection precision: 0.01V.
• Адзінка абtage display range: 0.1V-4.5V.
• Усяго выпtage display range: 0.5V-36V.
• 1S test mode voltage дыяпазон: 4.0V-30V.
• Нізкі аб'ёмtage alarm mode for 2-8S batteries.
• Adjustable alarm set value range: OFF-2.7V-3.8V.
• Integrated LED indicator for clear voltagэлектронны дысплей.
• Loud buzzer alarm for audible low voltagэлектронныя абвесткі.

5. Настройка

To set up the yueton Lipo Battery Tester Monitor, simply connect the balance lead of your 1-8S lithium battery to the corresponding pins on the tester. Ensure the polarity is correct. The device will automatically detect the cell count and display the total voltage, then cycle through individual cell voltagэс.

Малюнак 1: Спераду view of the yueton Lipo Battery Tester Monitor. This image shows the device's LED display, the connection pins for the battery balance lead, and text indicating its features and alarm settings.

6. Інструкцыя па эксплуатацыі

Once connected, the tester will immediately power on and display the total voltage of the battery. It will then cycle through the voltage of each individual cell. The LED display provides real-time voltagэлектронныя паказанні.

Малюнак 2: Задняя частка view of the yueton Lipo Battery Tester Monitor. This image provides a view of the device's internal components, including the two circular buzzers responsible for the audible alarm.

7. Setting the Alarm Voltage

Нізкая гучнасцьtage alarm can be set to a desired threshold. The default pre-set value is 3.3V per cell.

1. Locate the small push button on the top side of the device.
2. Press the button to cycle through the available alarm voltage settings (OFF, 2.7V, 2.8V, ..., 3.8V).
3. Release the button when the desired voltage is displayed. The setting will be automatically saved.

Калі тtage of any cell drops below the set alarm value, the device will emit a loud buzzer sound and a red LED light will illuminate, indicating a low voltagе стан.

8. Тэхнічнае абслугоўванне

• Захоўвайце прыладу ў чысціні і без пылу і смецця.
• Захоўвайце ў сухім асяроддзі, калі ён не выкарыстоўваецца.
• Не кідайце прыладу і не падвяргайце яе моцным ударам.

9. Выпраўленне непаладак

• Прылада не ўключаецца: Ensure the battery is charged and the balance lead is connected correctly with the right polarity. Check for any visible damage to the pins or wires.
• Alarm is too loud: The device is designed with a loud alarm for clear audibility in various environments. This is a normal operational characteristic.
• Няправільныя паказанні: Verify that the battery is functioning correctly. If readings remain inconsistent, the device may require replacement.

10. Тэхнічныя характарыстыкі

Figure 3: Dimensions of the yueton Lipo Battery Tester Monitor. This image illustrates the physical size of the device, showing its length as 4cm (1.57 inches) and width as 2.4cm (0.94 inches).

11. Гарантыя і падтрымка

Specific warranty information for this product is not provided in the available data. For support or warranty inquiries, please contact the retailer or manufacturer directly.