Philips 800144 Downlight Surface Mounted LED Fixture User Manual

Прадукт скончаныview

The Philips 800144 LED Surface Mounted Fixture is designed to convert existing ceiling-mounted fixtures or standard recessed cans into an energy-efficient LED light source. This dimmable fixture provides a soft white light, suitable for various indoor and outdoor applications.

Image: Philips 800144 Downlight Surface Mounted LED Fixture. This image shows the compact design of the LED fixture, ready for installation.

Асноўныя характарыстыкі:

• Энергаэфектыўнасць: 13-watt LED, equivalent to a 75-watt standard incandescent bulb.
• Доўгі тэрмін службы: Rated for 36,000 hours (based on 3 hours/day usage).
• Універсальны мантаж: Can be mounted to a 4-inch junction box or in a 5/6-inch recessed housing.
• Мяккае белае святло: Provides a comfortable ambiance for general room lighting.
• Зацямненне: Compatible with dimmer switches for adjustable brightness.
• Wet Location Suitable: Ideal for bathrooms, showers, or covered outdoor areas.

Настройка і ўстаноўка

This fixture is designed for surface mounting and can be installed directly onto a 4-inch junction box or within a 5/6-inch recessed housing. No complex assembly is required for the fixture itself.

Этапы ўстаноўкі:

1. Бяспека перш за ўсё: Ensure power to the installation area is turned off at the circuit breaker before beginning.
2. Падрыхтуйце мантажную паверхню: For junction box installation, ensure the box is securely fastened. For recessed housing, ensure the housing is properly installed.
3. Падключэнне правадоў: Connect the fixture's wires to the corresponding household wires (live, neutral, ground) according to local electrical codes. Use appropriate wire connectors.
4. Мацаванне: Secure the fixture to the junction box or recessed housing using the provided hardware. Ensure a snug fit against the ceiling surface.
5. Аднавіць сілу: Пасля таго, як прыбор надзейна ўсталяваны і падключаны, аднавіце электразабеспячэнне з дапамогай аўтаматычнага выключальніка.
6. Праверка функцыянальнасці: Уключыце выключальнік святла, каб праверыць яго спраўнасць.

Note: Installation should be performed by a qualified electrician if you are unsure about electrical wiring procedures.

Інструкцыя па эксплуатацыі

The Philips 800144 LED fixture operates on a standard 120-volt electrical supply. It provides 1100 lumens of soft white LED light. The fixture is dimmable, allowing you to adjust the light output using a compatible dimmer switch.

Каляровая тэмпература святла:

Understanding color temperature helps in choosing the right lighting for your space. While this fixture provides a soft white light, the following chart illustrates various color temperatures and their typical ambiances.

Image: Color Temperature Chart. This chart displays different light color temperatures ranging from warm amber (2000-2200K) to cool daylight deluxe (6500K), illustrating the ambiance each creates. The Philips 800144 provides a soft white light, typically around 2700K-3000K.

Функцыянальнасць рэгулявання яркасці:

To utilize the dimming feature, ensure the fixture is connected to a compatible dimmer switch. Refer to your dimmer switch's instructions for proper operation and compatibility.

Тэхнічнае абслугоўванне

The Philips 800144 LED fixture is designed for long-term, maintenance-free operation with a lifespan of approximately 36,000 hours. As an LED fixture, it does not require bulb replacement.

Уборка:

• Before cleaning, ensure the power to the fixture is turned off at the circuit breaker.
• Працярыце вонкавую паверхню прыбора мяккай губкайamp тканіна.
• Do not use abrasive cleaners or solvents, as these can damage the finish or electrical components.
• Перад тым, як аднавіць электраэнергію, пераканайцеся, што прыбор цалкам высах.

Ліквідацыю непаладак

If you encounter issues with your Philips 800144 LED fixture, refer to the following common troubleshooting steps:

• Святло не ўключаецца:
  • Праверце аўтаматычны выключальнік, каб пераканацца, што прыбор падаецца на электрычнасць.
  • Verify that the light switch is in the "on" position.
  • Inspect wiring connections for looseness or damage (ensure power is off before inspection).
• Мігценне святла:
  • Ensure the fixture is compatible with your dimmer switch, if one is installed. Some LED fixtures require specific types of dimmers.
  • Праверце правадныя злучэнні.
  • Flickering can sometimes indicate an aging power supply within the LED fixture, especially after several years of use.
• Light is Dim or Uneven:
  • If using a dimmer, ensure it is set to the desired brightness level.
  • Verify that the fixture is receiving the correct voltage (120 вольт).

If these steps do not resolve the issue, contact Philips customer support for further assistance.

Тэхнічныя характарыстыкі

Інфармацыя аб гарантыі

The Philips 800144 Downlight Surface Mounted LED Fixture comes with a manufacturer's warranty covering 2 гадоў на дэталі і працу з даты пакупкі. Калі ласка, захавайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.

For warranty service or questions, please contact Philips customer support.

Падтрымка кліентаў

For technical assistance, troubleshooting beyond the scope of this manual, or warranty inquiries, please contact Philips customer service. Visit the official Philips webсайт для кантактнай інфармацыі і рэсурсаў падтрымкі.

вытворца: Асвятленне Philips

Марка: Philips