JYETech DSO 138 DIY KIT 13803K Digital Oscilloscope Instruction Manual

1. Прадукт скончыўсяview

The DSO138 is engineered as a training oscilloscope kit, emphasizing fundamental oscilloscope functions for straightforward assembly and operation. It incorporates a Cortex-M3 ARM processor (STM32F103C8) and a 2.4-inch TFT LCD, providing clear waveform visualization. This specific 13803K kit features pre-soldered Surface Mount Device (SMD) components and a pre-programmed Microcontroller Unit (MCU), which simplifies the initial assembly process.

2. Налада і зборка

While the SMD components are pre-soldered and the MCU is pre-programmed, the assembly of through-hole components and general soldering are still required for other parts of the kit. Please refer to the detailed assembly instructions and schematics provided with your physical kit for precise, step-by-step guidance.

Патрабаванні да крыніцы харчавання: A 9V DC power supply is essential for the operation of the DSO138 and is not included with this kit. Ensure that the power supply you use is compatible with the device's specifications.

Figure 2.1: All components included in the JYE DSO 138 DIY KIT 13803K.

Figure 2.2: The assembled circuit board and display module of the DSO 138 kit.

3. Інструкцыя па эксплуатацыі

The DSO138 provides essential oscilloscope functionalities for signal analysis.

Асноўныя характарыстыкі:

• Аналагавая прапускная здольнасць: 0 - 200KHz
• SampЛінг -курс: 1Msps max
• Адчувальнасць: 10mV/Div - 5V/Div
• Вертыкальнае дазвол: 12-бітны
• Часовая база: 10us/Div - 500s/Div
• Працягласць запісу: 1024 балаў
• Тэст-сігнал: Built-in 1KHz/3.3V test signal for calibration and testing
• Функцыя HOLD: Waveform frozen (HOLD) function available for detailed analysis

Connecting and Displaying Waveforms:

Connect your signal source to the input BNC connector. Utilize the onboard controls to adjust the vertical sensitivity (V/Div) and timebase (s/Div) settings. These adjustments are crucial for properly scaling and displaying the waveform on the 2.4-inch TFT LCD in real-time.

Figure 3.1: The DSO 138 digital oscilloscope actively displaying a waveform from an external source.

Малюнак 3.2: Падрабязны view of the DSO 138's 2.4-inch TFT LCD, showing a clear sine wave display.

4. Тэхнічнае абслугоўванне

To ensure the longevity and optimal performance of your DSO138 oscilloscope, follow these maintenance guidelines:

• Уборка: Keep the device clean and free from dust. Use a soft, dry cloth for cleaning. Avoid abrasive cleaners or solvents.
• Умовы навакольнага асяроддзя: Do not expose the oscilloscope to extreme temperatures, high humidity, or direct sunlight. Store it in a dry, stable environment.
• Апрацоўка: Асцярожна звяртайцеся з прыладай, каб пазбегнуць фізічных пашкоджанняў. Пазбягайце падзення або моцных удараў.
• Мадыфікацыі: Do not attempt to modify the internal circuitry beyond the intended assembly steps. Unauthorized modifications can void any potential warranty and may damage the device.

5. Выпраўленне непаладак

This section addresses common issues you might encounter with your DSO138 kit.

Агульныя праблемы:

• Няма дысплея або харчавання: Ensure the 9V DC power supply is correctly connected and functioning. If the kit was recently assembled, double-check all power-related connections and soldering points for continuity and shorts.
• Distorted or Unstable Waveforms: Verify that the probe is securely connected and that its 1X/10X switch (if present) is set appropriately for your measurement. Adjust the vertical sensitivity (V/Div) and timebase (s/Div) settings on the oscilloscope to properly scale the waveform.
• Component Overheating: If any component, such as a diode (e.g., D2), becomes excessively hot during operation, immediately disconnect power. This often indicates a short circuit, an incorrectly installed component, or a faulty part. Consult the provided schematic for correct component placement and values.

For more detailed troubleshooting steps, refer to the comprehensive troubleshooting guide and schematic included with your kit. If issues persist, contact JYETech customer support for further assistance.

6. Тэхнічныя характарыстыкі

Detailed technical specifications for the JYETech DSO 138 DIY KIT 13803K:

• Аналагавая прапускная здольнасць: 0 - 200KHz
• SampЛінг -курс: 1Msps max
• Адчувальнасць: 10mV/Div - 5V/Div
• Вертыкальнае дазвол: 12-бітны
• Часовая база: 10us/Div - 500s/Div
• Працягласць запісу: 1024 балаў
• Дысплей: 2.4-inch TFT LCD (320 x 240 dot matrix, 262K colors)
• Працэсар: Cortex-M3 ARM (STM32F103C8)
• Тэст-сігнал: Built-in 1KHz/3.3V
• крыніца харчавання: 9 В пастаяннага току (не ўваходзіць у камплект)
• Памеры (выраб): Прыкладна 4 х 3 х 1 цалі
• Вага прадмета: Прыкладна 3.99 унцыі

7. Гарантыя і падтрымка кліентаў

For specific warranty terms, conditions, and to access technical support, please refer to the official documentation provided with your JYETech DSO 138 DIY KIT 13803K or visit the official JYETech website. Contact information for customer service is typically found within the product packaging or on the manufacturer's webсайт.