TC Electronic HYPERGRAVITY COMPRESSOR

TC Electronic HYPERGRAVITY COMPRESSOR

Кіраўніцтва карыстальніка

1. Уводзіны

The TC Electronic HYPERGRAVITY COMPRESSOR is a versatile guitar effects pedal designed to provide exceptional multiband compression, a sweet vintage compressor mode, and the flexibility of TonePrint technology. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your HYPERGRAVITY COMPRESSOR pedal.

TC Electronic HYPERGRAVITY COMPRESSOR pedal, front view

Выява 1.1: Спераду view of the TC Electronic HYPERGRAVITY COMPRESSOR pedal, showcasing its controls and footswitch.

2. Асаблівасці

  • Exceptional Multiband Compression: Provides advanced compression across multiple frequency bands for precise dynamic control.
  • вінtage Compressor Mode: Offers classic, warm compression tones reminiscent of iconic studio compressors.
  • TonePrint Enabled: Allows for custom effect settings and artist-created presets to be beamed to the pedal via a smartphone app or USB.
  • Сапраўдны абыход: Ensures optimal signal integrity when the pedal is disengaged.
  • Кампактны дызайн: Durable metal chassis suitable for pedalboards.
  • Top-Mounted Jacks: Input and output jacks are conveniently located on the top of the pedal.

3. Настройка

Follow these steps to properly set up your HYPERGRAVITY COMPRESSOR pedal:

  1. Падключэнне сілкавання: Connect a standard 9V DC power supply (center negative, 100mA minimum) to the 9V DC input jack on the top of the pedal. The pedal can also be powered by a 9V battery, which requires unscrewing the back plate for installation.
  2. Уваходнае злучэнне: Connect your guitar or the output of a preceding effects pedal to the INPUT jack on the right side of the pedal using a standard 1/4-inch instrument cable.
  3. Выходнае злучэнне: Падключыце раз'ём OUTPUT з левага боку педалі да вашага amplifier or the input of the next effects pedal in your signal chain using a standard 1/4-inch instrument cable.
  4. Падключэнне USB (неабавязкова): For advanced TonePrint editing and firmware updates, connect a mini-USB cable from the pedal's USB port to your computer.
Тыл view of the TC Electronic HYPERGRAVITY COMPRESSOR pedal showing power and USB ports

Малюнак 3.1: ззаду view of the HYPERGRAVITY COMPRESSOR, highlighting the 9V DC power input and mini-USB port.

4. Кіраванне педаллю

The HYPERGRAVITY COMPRESSOR features four primary control knobs and a three-way toggle switch to shape your compression sound.

Close-up of the TC Electronic HYPERGRAVITY COMPRESSOR controls

Малюнак 4.1: Крупны план view of the control knobs and toggle switch on the HYPERGRAVITY COMPRESSOR.

4.1 Элементы кіравання

  • УСТОЙНА: Adjusts the amount of compression applied to the signal, affecting how long notes ring out. Higher settings increase sustain.
  • АТАКА: Controls how quickly the compressor reacts to the initial transient of a note. Lower settings allow more of the initial attack to pass through, while higher settings compress the attack more quickly.
  • УЗРОВЕНЬ: Sets the overall output volume of the pedal. Use this to match the volume of the compressed signal to your bypassed signal or to provide a boost.
  • БЛЕНД: Mixes the dry (uncompressed) signal with the wet (compressed) signal. A setting of 0% is fully dry, and 100% is fully wet. This allows for parallel compression techniques.

4.2 Пераключальнік рэжыму

The three-way toggle switch selects between different compression modes:

  • SPECTRA: Engages the advanced multiband compression algorithm, providing transparent and precise dynamic control.
  • TONEPRINT: Activates a custom TonePrint preset loaded onto the pedal. This allows for personalized compression settings or artist-designed tones.
  • VINTAGE: Selects a classic, warm, and punchy compression style, emulating traditional compressor pedals.

4.3 TonePrint Functionality

TonePrint allows you to customize your pedal's sound or load presets created by professional artists. You can access TonePrints via the free TC Electronic TonePrint App for smartphones or the TonePrint Editor software for computers.

  • Beaming TonePrints (Smartphone App): Open the TonePrint App, select a TonePrint, and hold your smartphone's speaker close to your guitar pickup. The app will

    Ask a question about this manual

    Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.