1. Уводзіны
This manual provides detailed instructions for the installation, operation, and maintenance of the GeoVision GV-MFD2501-6F 2MP Mini Fixed Dome IP Security Camera. Please read this manual thoroughly before using the product to ensure proper setup and functionality. Keep this manual for future reference.
1.1 Прадукт скончыўсяview
The GV-MFD2501-6F is a compact 2-megapixel mini fixed dome IP camera designed for various surveillance applications. It features a 2.3mm lens, super low lux capabilities, and supports network connectivity for remote monitoring.
Figure 1.1: GeoVision GV-MFD2501-6F Mini Fixed Dome IP Security Camera. This image shows the compact design of the camera, highlighting its dome shape and lens.
1.2 Змест пакета
Verify that all items are present in the package. If any items are missing or damaged, contact your dealer immediately.
- GV-MFD2501-6F IP Camera
- Камплект мантажных шруб
- Кіраўніцтва па ўстаноўцы
- Software CD (or download link)
- Waterproof Connector (if applicable)
2. Інфармацыя па бяспецы
WARNING: To prevent fire or shock hazard, do not expose this unit to rain or moisture.
- Выкарыстоўвайце толькі адаптар сілкавання, прызначаны для гэтай прылады.
- Do not open the camera housing. Refer all servicing to qualified personnel.
- Avoid placing the camera in direct sunlight, near heat sources, or in areas with high humidity or dust.
- Забяспечце належную вентыляцыю вакол камеры.
- Адключыце электрычнасць перад чысткай або тэхнічным абслугоўваннем.
3. Настройка
3.1 Фізічная ўстаноўка
The GV-MFD2501-6F is designed for indoor use. Choose a suitable mounting location that provides the desired field of view і знаходзіцца ў межах дасяжнасці сеткавых і электрычных кабеляў.
- Падрыхтуйце мантажную паверхню: Use the provided mounting template (if included) to mark drill holes.
- Свідраваць адтуліны: Прасвідруйце накіроўвалыя адтуліны для крапежных шруб.
- Абараніце камеру: Прымацуйце аснову камеры да мантажнай паверхні з дапамогай прадугледжаных шруб.
- Наладзіць кут: Loosen the adjustment screws to position the camera lens for the desired viewing angle, then tighten the screws to secure it.
Figure 3.1: Illustrative diagram of camera mounting. This image would typically show the steps for securing the camera to a ceiling or wall, including screw placement and cable routing.
3.2 Праводка і злучэнні
Connect the camera to your network and power source.
- Кабель Ethernet: Connect an Ethernet cable from your network switch or router to the camera's RJ-45 port. If using Power over Ethernet (PoE), this single cable provides both power and data.
- Power Adapter (if not using PoE): If PoE is not available, connect a compatible 12V DC power adapter (not included) to the camera's power input port.
Figure 3.2: Diagram showing camera wiring connections. This image would illustrate how to connect the Ethernet cable and, if necessary, the power adapter to the camera's ports.
3.3 Пачатковая канфігурацыя сеткі
After physical installation and connection, configure the camera for network access.
- Уключэнне: Connect the camera to power. The camera will perform a self-test.
- Адкрыйце для сябе камеру: Use the GeoVision GV-IP Device Utility (available on the GeoVision website) to discover the camera on your local network. The utility will display the camera's IP address.
- Доступ Web інтэрфейс: Адкрыйце a web browser (e.g., Chrome, Firefox) and enter the camera's IP address in the address bar.
- Лагін: Enter the default username (e.g., "admin") and password (e.g., "admin" or "1234"). You will be prompted to change the password upon first login for security.
- Налады сеткі: Navigate to the network settings to configure IP address (DHCP or Static), subnet mask, gateway, and DNS settings as required by your network environment.
4. Інструкцыя па эксплуатацыі
Once configured, the camera can be accessed and managed through its web interface or compatible GeoVision VMS software.
4.1 У прамым эфіры View
Ад ст web interface, navigate to the "Live View" section to see the real-time video feed from the camera. You can adjust video stream settings such as resolution, frame rate, and quality here.
4.2 Налады запісу
Configure recording schedules, motion detection recording, and continuous recording options. Recordings can be stored on a network-attached storage (NAS), local storage (if supported), or a GeoVision NVR/VMS.
4.3 Дэтэктар руху
Set up motion detection zones and sensitivity levels. When motion is detected, the camera can trigger recording, send email alerts, or activate other alarm outputs.
4.4 Аддалены доступ
To access the camera remotely, ensure your network router is configured for port forwarding (if not using a VPN or cloud service). Refer to your router's manual for port forwarding instructions. GeoVision also offers mobile applications for remote viewінж.
5. Тэхнічнае абслугоўванне
5.1 Чыстка камеры
Regularly clean the camera lens and housing to ensure optimal image quality. Use a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild detergent can be used, followed by a dry cloth. Do not use abrasive cleaners or solvents.
5.2 Абнаўленне прашыўкі
Перыядычна правярайце GeoVision webсайт для абнаўленняў прашыўкі. Абнаўленні прашыўкі могуць забяспечыць новыя функцыі, паляпшэнне прадукцыйнасці і бяспекі. Уважліва выконвайце інструкцыі, якія пастаўляюцца з пакетам абнаўлення прашыўкі.
5.3 Кіраванне паролямі
Regularly change your camera's password to a strong, unique password to prevent unauthorized access.
6. Выпраўленне непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Няма харчавання на камеру | Power adapter unplugged or faulty; PoE not active. | Check power connections. Ensure PoE switch/injector is active. Test with a known good power source. |
| Няма відэаканала | Network cable disconnected; incorrect IP address; firewall blocking access. | Verify Ethernet cable connection. Use GV-IP Device Utility to find camera. Check network settings and firewall rules. |
| Немагчыма ўвайсці | Incorrect username/password. | Ensure correct credentials. If forgotten, refer to the GeoVision website for password reset procedures (may require physical access). |
| Дрэнная якасць выявы | Dirty lens; improper focus; low light conditions; incorrect video settings. | Clean the lens. Adjust focus if applicable. Ensure adequate lighting. Check resolution, frame rate, and compression settings. |
7. Тэхнічныя характарыстыкі
The following are key specifications for the GeoVision GV-MFD2501-6F camera:
- мадэль: 84-MFD2501-6F1U
- дазвол: 2 мегапікселяў
- Аб'ектыў: 2.3 мм нерухомы аб'ектыў
- Падключэнне: Бесправадная сувязь Note: While "Wireless" is listed in specifications, this IP camera primarily uses wired Ethernet for reliable data transmission and PoE. Wireless functionality may refer to specific optional modules or control methods.
- Магутнасць: PoE (Power over Ethernet) or 12V DC (adapter not included)
- Памеры: Approximately 21 x 18.6 x 9.3 cm (Parcel Dimensions)
- Вага: Прыблізна 487 г (вага пасылкі)
- Працоўная тэмпература: (Information not provided, typical range is -10°C to 50°C)
- вытворца: GeoVision
8. Гарантыя і падтрымка
8.1 Інфармацыя аб гарантыі
GeoVision products typically come with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official GeoVision webсайт. Захоўвайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.
8.2 Тэхнічная падтрымка
For technical assistance, product inquiries, or troubleshooting beyond this manual, please contact GeoVision customer support or your authorized GeoVision dealer. Visit the official GeoVision webсайт (www.geovision.com.tw) for support resources, FAQs, and contact information.