Seatcraft Sienna Home Theater Seating Instruction Manual

Уводзіны

This manual provides detailed instructions for the assembly, operation, and maintenance of your Seatcraft Sienna Home Theater Seating. Please read this manual thoroughly before use to ensure proper function and safety. The Sienna model features a space-saving design, power recline, ambient lighted cupholders, ambient base lighting, USB charging, and integrated tray tables.

Інфармацыя па бяспецы

ПАПЯРЭДЖАННЕ: Каб пазбегнуць траўмаў або пашкоджанняў, калі ласка, выконвайце наступныя правілы бяспекі:

• Максімальная ёмістасць: The seating has a maximum weight capacity of 350 pounds per seat. Do not exceed this limit.
• Recline Feature: Keep fingers, pets, and other body parts clear of the reclining mechanism when operating the recline function or returning the seat to an upright position.
• Ensure all power cords are properly connected and routed to avoid tripping hazards or damage.
• Do not allow children to play on or operate the reclining mechanism unsupervised.

Змест пакета

Verify that all components are present before beginning assembly. The package should include:

• Seatcraft Sienna Seating Units (e.g., 2-row configuration)
• Backrests for each seating unit
• Адаптар(ы) харчавання
• Removable Tray Tables (quantity may vary by configuration)
• Інструкцыя па эксплуатацыі (гэты дакумент)

Note: For specific component counts based on your configuration (e.g., Row of 2, Row of 3, Row of 4), please refer to your packaging list.

Настройка

Assembly of the Seatcraft Sienna Home Theater Seating is designed to be straightforward and typically takes 30 minutes or less. Follow these steps:

1. Распакуйце кампаненты: Асцярожна выміце ўсе дэталі з упакоўкі. Пакладзеце іх на мяккую, чыстую паверхню, каб пазбегнуць драпін.
2. Прымацаваць спінкі: Align the metal brackets on the backrest with the corresponding receivers on the seat base. Slide the backrest down firmly until it locks into place. Repeat for all seating units.
3. Падключыце харчаванне: Locate the power cord(s) and connect them to the power input on each seat unit. Plug the power adapter(s) into a standard electrical outlet.
4. Position Seating: Place the assembled seating in your desired location. The wall-hugger design allows the chairs to be placed just inches from a wall, even in full recline.

For visual guidance on setting up multi-seat configurations, refer to the official setup video:

Інструкцыя па эксплуатацыі

Power Recline

Each seating unit is equipped with a power recline mechanism for personalized comfort. Locate the control buttons on the side of the armrest.

• To recline, press and hold the recline button. The footrest will extend, and the backrest will lean back.
• Release the button when you reach your desired position.
• To return to the upright position, press and hold the opposite button.

USB Зарадная прылада

Conveniently charge your electronic devices using the integrated USB ports.

• Locate the USB charging station on the armrest.
• Plug your device's USB cable into one of the available ports.
• Ensure the seating unit is powered on for charging functionality.

Ambient Lighting (Cupholders & Base)

The Sienna seating features ambient blue LED lighting in the cupholders and along the base for enhanced ambiance and visibility in low-light conditions.

• Locate the lighting control button on the armrest, typically near the recline controls.
• Press the button to turn the ambient cupholder and base lighting on or off.

Removable Tray Tables

The included tray tables provide a convenient surface for snacks, drinks, or personal items.

• To install, insert the tray table's post into the designated receiver hole on the armrest.
• The tray table can be rotated to your preferred position.
• To remove, simply lift the tray table out of the receiver hole.

Тэхнічнае абслугоўванне

Proper care will extend the life and appearance of your Seatcraft Sienna Home Theater Seating.

• Уборка: Для агульнай уборкі працярыце скураную паверхню мяккай губкайamp cloth. For spills or stains, use a mild leather cleaner and follow the product instructions. Avoid harsh chemicals or abrasive cleaners.
• Ачыстка пылу: Regularly dust all surfaces, including the base and armrests, with a soft, dry cloth.
• Сыход за механізмам: Periodically check the reclining mechanism for any loose fasteners. Tighten if necessary. Avoid forcing the mechanism if it encounters resistance.
• Шнуры харчавання: Inspect power cords for any signs of damage. If damaged, discontinue use and contact customer support.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

For specific warranty details, please refer to the documentation included with your purchase or visit the official Seatcraft website. If you encounter any issues or require assistance, please contact Seatcraft customer support.

Падтрымка кліентаў: Refer to your purchase invoice or the Seatcraft webсайт для кантактнай інфармацыі.