1. Уводзіны
This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your KERN PFB 600-2 Precision Laboratory Balance. Please read these instructions carefully before using the device to ensure accurate measurements and prolong its lifespan.
2. Інфармацыя па бяспецы
- Заўсёды выкарыстоўвайце вагі на ўстойлівай, роўнай паверхні без вібрацый.
- Avoid exposing the balance to extreme temperatures, direct sunlight, or high humidity.
- Do not overload the balance beyond its maximum capacity of 600g.
- Keep liquids and corrosive substances away from the balance.
- Выкарыстоўвайце толькі адаптар сілкавання, які ўваходзіць у камплект.
3. Настройка
3.1 Распакаванне і праверка
Carefully remove the balance from its packaging. Inspect all components for any signs of damage. The package should contain the balance unit, weighing pan, draft shield (if applicable), and power adapter.
This image displays the KERN PFB 600-2 Precision Laboratory Balance. It features a white and blue casing, a circular weighing pan, and a clear glass draft shield. The digital display shows '0.00 g', and control buttons for 'PRINT/ESC', 'MODE', 'PCS', '%', 'TARE', and 'ON/OFF' are visible on the front panel.
3.2 Размяшчэнне і выраўноўванне
- Place the balance on a firm, level, and vibration-free surface.
- Adjust the leveling feet located at the bottom of the balance until the air bubble in the spirit level (usually located near the display) is centered.
3.3 Падключэнне харчавання
Connect the power adapter to the balance and then plug it into a suitable power outlet. Allow the balance to warm up for at least 30 minutes before initial use for optimal accuracy.
4. Інструкцыя па эксплуатацыі
4.1 Уключэнне/выключэнне сілкавання
- Націсніце ВКЛ/ВЫКЛ button to turn the balance on.
- Націсніце і ўтрымлівайце ВКЛ/ВЫКЛ button to turn the balance off.
4.2 Асноўнае ўзважванне
- Ensure the balance is level and the display shows '0.00 g'. If not, press the СКАРА кнопку, каб абнуліць дысплей.
- Carefully place the item to be weighed onto the center of the weighing pan.
- Read the stable weight value displayed.
4.3 Функцыя тары
The tare function allows you to weigh items in a container without including the container's weight.
- Пастаўце пустую ёмістасць на платформу ўзважвання.
- Націсніце СКАРА button. The display will show '0.00 g'.
- Add the substance to be weighed into the container. The display will show only the net weight of the substance.
4.4 Пераўтварэнне адзінак
Націсніце РЭЖЫМ button to cycle through available weighing units (e.g., grams, ounces, pounds, carats, etc.). The active unit will be indicated on the display.
4.5 Counting Function (PCS)
This function allows for counting a large number of identical items.
- Place a known quantity of items (e.g., 10, 20, 50, 100 pieces) on the pan.
- Націсніце шт button. The display will prompt you to select the sample памер.
- Выкарыстоўвайце РЭЖЫМ or % buttons to select the corresponding sample size (e.g., P10 for 10 pieces).
- Прэса шт again to confirm. The balance is now in counting mode.
- Add more items, and the display will show the total count.
4.6 працэнтыtage Weighing (%)
This function allows you to determine the percentage of a sample relative to a reference weight.
- Змесціце спасылку sampле на чашу вагаў.
- Націсніце % button. The display will show '100.00%'.
- Выдаліце спасылку sample і змесціце sample to be measured. The display will show its weight as a percentage of the reference sampле.
4.7 Print Function
If connected to a compatible printer or PC, pressing the PRINT/ESC button will send the current weighing data to the connected device.
5. Тэхнічнае абслугоўванне
5.1 Ачыстка
- Перад чысткай заўсёды адключайце сетку.
- Wipe the balance exterior with a soft, damp тканіна. Пры неабходнасці выкарыстоўвайце мяккі мыйны сродак.
- Do not use abrasive cleaners, solvents, or immerse the balance in water.
- Clean the weighing pan regularly to prevent accumulation of dust or debris.
5.2 Захоўванне
When not in use for extended periods, store the balance in a dry, dust-free environment at room temperature. Ensure the draft shield is in place to protect the weighing mechanism.
5.3 Паўторная каліброўка
Periodic calibration with certified weights is recommended to maintain accuracy. Refer to the balance's specific calibration procedure in the full technical manual or contact KERN support for guidance.
6. Выпраўленне непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Display shows 'Err' or 'Overload' | Вага перавышае максімальную ёмістасць. | Пазбаўцеся ад лішняй вагі. |
| Няправільныя паказанні | Balance not level, vibrations, temperature fluctuations, need for calibration. | Check leveling, move to stable surface, allow warm-up, perform calibration. |
| Дысплей не ўключаецца | No power, faulty adapter. | Check power connection, try a different outlet, verify adapter functionality. |
| Display shows '0.00' but weight is on pan | Tare function was activated with item on pan. | Remove item, press СКАРА to zero, then re-weigh. |
7. Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Нумар мадэлі | PFB 600-2 |
| Максімальная ёмістасць | 600 г |
| Памеры прадукту | 12.4 х 8.27 х 3.54 цалі |
| Вага прадмета | 4.41 фунта |
| Тып дысплея | Лічбавы |
| Асаблівасці | High Precision, High Weight Capacity, Digital Display |
| Рэкамендуемае выкарыстанне | Laboratory/Scientific Applications, Jewellery |
8. Інфармацыя аб гарантыі
KERN products are manufactured to high-quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and duration, please refer to the warranty card included with your product or visit the official KERN webсайт. Захоўвайце чэк аб куплі як пацверджанне пакупкі.
9. Падтрымка
For technical assistance, service, or further inquiries regarding your KERN PFB 600-2 Precision Laboratory Balance, please contact KERN customer support. Contact details can typically be found on the KERN official webсайце або ў дакументацыі, якая прадастаўляецца разам з пакупкай.