AngelEye CO-AE-9B-FR Carbon Monoxide Detector User Manual

1. Уводзіны

This manual provides essential information for the proper installation, operation, and maintenance of your AngelEye CO-AE-9B-FR Carbon Monoxide (CO) Detector. Please read these instructions carefully before use and retain them for future reference. This device is designed to detect carbon monoxide gas and alert occupants to its presence, helping to prevent CO poisoning.

Важная інфармацыя па бяспецы:

• This CO detector is not a substitute for a smoke detector.
• Regular testing of the device is crucial for ensuring its proper function.
• Never ignore a CO alarm. Follow the instructions in the 'Alarm Conditions and Response' section immediately.

2. Змесціва ўпакоўкі

Праверце наяўнасць усіх прадметаў у камплекце:

• AngelEye CO-AE-9B-FR Carbon Monoxide Detector
• Мантажныя шрубы і дюбелі
• 2 шчолачных батарэек 1.5 В АА
• Кіраўніцтва па эксплуатацыі

3. Прадукт скончыўсяview

The AngelEye CO-AE-9B-FR detector features a user-friendly design with clear indicators and a central test button.

Малюнак 1: Фронт view of the AngelEye CO-AE-9B-FR Carbon Monoxide Detector. It is a white rectangular unit with rounded corners. On the left side, there is a large circular button labeled 'TEST/PAUSE'. To the right of this button, there are two smaller circular indicator lights. The top light is labeled 'Marche' (On/Power) and the bottom light is labeled 'Alarme' (Alarm). Further to the right, there are three horizontal ventilation slots.

Ключавыя кампаненты:

• TEST/PAUSE Button: Used to test the detector's functionality and to silence a temporary alarm.
• Marche (On) Indicator: Illuminates to indicate the device is powered on and functioning correctly.
• Alarme (Alarm) Indicator: Illuminates and flashes during a CO alarm event.
• Вентыляцыйныя адтуліны: Allow CO gas to enter the sensor chamber. Do not obstruct.

4. Ўстаноўка

4.1 Выбар месца

For optimal performance and safety, consider the following:

• Install at least one CO detector on each level of your home, especially near sleeping areas.
• Place the detector in rooms with fuel-burning appliances (e.g., furnaces, water heaters, fireplaces).
• Mount on a wall or ceiling. If wall-mounted, place it at eye level or higher, but at least 15 cm (6 inches) from the ceiling.
• Avoid placing the detector in direct sunlight, near vents, fans, or in areas with high humidity (e.g., bathrooms).
• Keep at least 1 meter (3 feet) away from fuel-burning appliances to prevent nuisance alarms from initial startup fumes.

4.2 Устаноўка батарэі

1. Open the battery compartment cover on the back of the detector.
2. Insert the two 1.5V AA alkaline batteries, ensuring correct polarity (+ and -).
3. Close the battery compartment cover securely. The detector will emit a short beep and the 'Marche' indicator will flash, indicating it is powered on.

4.3 Мантаж дэтэктара

1. Once the location is chosen, mark the positions for the mounting screws on the wall or ceiling.
2. Drill holes and insert the wall plugs (if necessary).
3. Secure the mounting bracket (if separate) or the detector directly using the provided screws.
4. Пераканайцеся, што дэтэктар надзейна замацаваны і стабільны.

5. Інструкцыя па эксплуатацыі

5.1 Першапачатковае ўключэнне

After battery installation, the detector will perform a self-test. The 'Marche' indicator will flash, and a short beep may sound. The device is then operational.

5.2 Нармальная праца

During normal operation, the 'Marche' (On) indicator light will flash approximately once every 30-60 seconds, indicating that the detector is actively monitoring for carbon monoxide.

5.3 Тэставая функцыя

It is recommended to test your CO detector weekly to ensure it is functioning correctly.

1. Press and hold the large 'TEST/PAUSE' button for a few seconds.
2. The detector will emit a loud alarm sound, and the 'Alarme' indicator will flash.
3. Release the button. The alarm will stop, and the detector will return to normal monitoring mode.

If the alarm does not sound during the test, refer to the 'Troubleshooting' section.

5.4 Alarm Conditions and Response

If the detector senses a dangerous level of carbon monoxide, it will activate a loud intermittent alarm sound, and the 'Alarme' indicator will flash rapidly.

Калі гучыць сігнал трывогі:

1. Immediately move to fresh air outdoors or open all doors and windows to ventilate the area.
2. Правядзіце падлік, каб пераканацца, што ўсе асобы ўлічаны.
3. Do not re-enter the premises until the alarm has stopped and the area has been thoroughly ventilated.
4. Звярніцеся ў службу экстранай дапамогі або да кваліфікаванага спецыяліста, каб высветліць крыніцу чаднага газу.
5. Не карыстайцеся прыборамі, якія працуюць на паліве, пакуль яны не будуць правераны спецыялістам.

5.5 Pause Function (Hush Mode)

In some cases, a temporary, non-threatening source of CO (e.g., fumes from a cleaning product) might trigger a nuisance alarm. The detector may feature a 'Pause' or 'Hush' function.

• Press the 'TEST/PAUSE' button briefly during an alarm.
• This will temporarily silence the alarm for a few minutes (e.g., 5-10 minutes).
• If the CO level remains high, the alarm will reactivate after the pause period.
• Do not use the pause function if you suspect a genuine CO leak.

6. Тэхнічнае абслугоўванне

6.1 Рэгулярнае тэсціраванне

Test your CO detector weekly by pressing the 'TEST/PAUSE' button as described in section 5.3.

6.2 Ачыстка

Clean the exterior of the detector regularly (at least once a month) with a soft, damp cloth. Do not use cleaning agents or solvents. Do not paint the detector, as this can block the ventilation slots and interfere with sensor operation.

6.3 Замена батарэі

The detector has a battery life of approximately 1 year. When the batteries are low, the detector will emit a regular chirp (e.g., every 30-60 seconds) and the 'Marche' indicator may flash differently or not at all. Replace the batteries immediately with two new 1.5V AA alkaline batteries. Refer to section 4.2 for battery installation instructions.

7. Выпраўленне непаладак

8. Тэхнічныя характарыстыкі

• мадэль: CO-AE-9B-FR (Reference: CO-AE9B-FRR)
• Марка: AngelEye
• Крыніца харчавання: Харчаванне ад батарэі
• батарэі: 2 x 1.5V AA alkaline batteries (included)
• Тэрмін службы батарэі: Прыкладна 1 год
• Памеры (Д х Ш х У): 13.3 х 13.3 х 4 см (5.2 х 5.2 х 1.6 цалі)
• Вага: 100 грам (3.5 унцый)
• Сертыфікаты: Сертыфікавана CE
• UPC: 816317001834

9. Гарантыя і падтрымка

The AngelEye CO-AE-9B-FR Carbon Monoxide Detector comes with a Гарантыя 7 год з даты пакупкі, якая пакрывае дэфекты матэрыялаў і вырабу пры нармальным выкарыстанні.

For warranty claims, technical support, or further assistance, please contact your retailer or the manufacturer's customer service. Keep your proof of purchase for warranty validation.