Legrand 067001

Legrand 067001 Céliane VMC Switch Instruction Manual

Model: 067001 | Brand: Legrand

1. Уводзіны

This instruction manual provides essential information for the safe installation, operation, and maintenance of the Legrand 067001 Céliane VMC Switch. This device is designed for controlling Ventilation Mécanique Contrôlée (VMC) systems, operating at 230V with a 10AX current rating.

2. Інфармацыя па бяспецы

WARNING: Risk of electric shock. Installation and maintenance should only be performed by a qualified electrician in accordance with national and local electrical codes.

  • Always disconnect power at the main circuit breaker before installing or servicing the switch.
  • Пераканайцеся, што ўсе злучэнні надзейныя і належным чынам ізаляваны.
  • Do not operate the switch with wet hands or in damp умовы.
  • This product is designed for indoor use only (IP20 rating).
  • Не перавышайце паказаны аб'ёмtage (230V) or current (10A) ratings.

3. Змесціва ўпакоўкі

  • 1 x Legrand 067001 Céliane VMC Switch Module

Note: Faceplate and mounting frame are typically sold separately and are required for complete installation.

4. Настройка і ўстаноўка

The Legrand 067001 switch is designed for wall or surface mounting. Proper installation is crucial for safety and functionality.

  1. Адключэнне сілкавання: Before beginning any installation, ensure the main power supply to the circuit is turned off at the circuit breaker. Verify with a voltagэлектронны тэстар.
  2. Мантаж: Install the switch module into a compatible mounting box or frame (not included). This switch supports wall or surface mounting configurations.
  3. Падключэнне правадоў:
    • Identify the Line (L) and Neutral (N) wires from your electrical supply.
    • Connect the electrical wires to the corresponding terminals on the switch module. The connection type is crimping. Ensure a secure and tight connection for each wire.
    • Refer to the wiring diagram provided with your VMC system or consult a qualified electrician for specific connection requirements.
  4. Замацуйце модуль: Once wired, secure the switch module within its mounting frame or box.
  5. Усталяваць асабовую панэль: Attach the decorative faceplate (not included) over the switch module.
  6. Аднавіць сілу: Пасля завяршэння ўстаноўкі і надзейнай мацавання ўсіх кампанентаў аднавіце электраэнергію з дапамогай галоўнага выключальніка.
Legrand 067001 Céliane VMC Switch module, showing internal components and connection terminals.

Image: Legrand 067001 Céliane VMC Switch module. This image displays the grey plastic housing, the internal mechanism, and the terminals for electrical connections, including 'N' for Neutral and 'L' for Line, indicating its wiring points.

5. Інструкцыя па эксплуатацыі

The Legrand 067001 is a push-button type switch with an ON-OFF operating mode, designed for controlling VMC systems. It features a call button with a luminous indicator.

  • Уключэнне/выключэнне: Press the push-button to toggle the connected VMC system between ON and OFF states.
  • Luminous Indicator: The integrated luminous indicator provides visual feedback on the switch's status or can be used as a call button depending on the specific VMC system configuration.

6. Тэхнічнае абслугоўванне

The Legrand 067001 VMC Switch requires minimal maintenance.

  • Уборка: To clean the switch, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this can damage the switch or create an electrical hazard.
  • агляд: Periodically inspect the switch for any signs of damage, loose connections, or discoloration. If any issues are observed, disconnect power and consult a qualified electrician.

7. Выпраўленне непаладак

If the switch or connected VMC system is not functioning correctly, consider the following:

  • Няма харчавання: Check if the circuit breaker for the switch is tripped. Reset if necessary.
  • Перамыкач не рэагуе: Ensure all wiring connections are secure. Loose connections can prevent proper operation.
  • Luminous Indicator Not Working: Verify the wiring for the indicator light is correctly connected according to your VMC system's specifications.
  • Пастаянныя праблемы: If troubleshooting steps do not resolve the issue, disconnect power and contact a qualified electrician for further assistance. Do not attempt repairs yourself.

8. Тэхнічныя характарыстыкі

АсаблівасцьСпецыфікацыя
Нумар мадэлі067001
МаркаЛегран
Аперацыйная Voltage230 вольт
Бягучы рэйтынг10 A (10AX)
Рэйтынг магутнасці1600 ват
Рэжым працыУКЛ ВЫКЛ
Тып перамыкачаКнопкавы
Тып кантактуЗвычайна закрыты
Тып раздымаАбцісканне
МатэрыялPlastic (housing), Copper (contact)
Тып мацаванняWall Mount or Surface Mount
Рэйтынг IPIP20
Вага6 грам
КолерШэры

9. Гарантыя і падтрымка

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Legrand customer service directly. Warranty terms may vary based on region and retailer.

You can find more information on the official Legrand webсайт: www.legrand.com

© 2023 Legrand. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.