M-Wave M30HCW Bicycle Computer

1. Уводзіны

Thank you for choosing the M-Wave M30HCW Wireless Bicycle Computer. This device is designed to enhance your cycling experience by providing comprehensive data about your rides. It features wireless transmission for a clean setup and a wide range of functions to track your performance and progress. Please read this manual carefully before installation and use to ensure optimal performance and longevity of your device.

Image 1.1: M-Wave M30HCW Bicycle Computer. This image displays the main unit of the M-Wave M30HCW bicycle computer, showcasinяго кампактны дызайн і выразны дысплей.

2. Інфармацыя па бяспецы

• Always prioritize road safety. Do not operate the computer or adjust settings while cycling in traffic.
• Ensure the computer is securely mounted to prevent it from detaching during your ride.
• Захоўвайце батарэі ў месцах, недаступных дзецям. Пры пападанні ўнутр неабходна неадкладна звярнуцца па медыцынскую дапамогу.
• Утылізуйце батарэйкі ў адпаведнасці з мясцовымі правіламі. Не спальвайце.
• The device has an Ingress Protection rating of IP44, meaning it is protected against splashing water from any direction. It is not designed for submersion.

3. Змесціва ўпакоўкі

Праверце наяўнасць усіх прадметаў у камплекце:

• M-Wave M30HCW Cyclocomputer Unit
• Wireless Speed/Cadence Sensor
• Магніт на кола
• Mounting Bracket (for handlebar or stem)
• Mounting Ties/Bands
• CR2 Batteries (4 required, included)

4. Настройка

4.1. Устаноўка батарэі

1. Open the battery compartment on the back of the cyclocomputer unit and the wireless sensor.
2. Insert the CR2 batteries, ensuring correct polarity (+/-).
3. Надзейна зачыніце батарэйныя адсекі.

4.2. Устаноўка велакамп'ютара

The M-Wave M30HCW features tool-free mounting for quick installation.

1. Attach the mounting bracket to your bicycle's handlebar or stem using the provided ties or bands. Ensure it is firmly secured and positioned for easy viewінж.
2. Устаўце блок велакамп'ютара ў мантажны кранштэйн да пстрычкі.

4.3. Mounting the Wireless Sensor and Magnet

1. Attach the wireless sensor to the front fork of your bicycle, ensuring it is aligned with the wheel spokes.
2. Mount the wheel magnet to a spoke on the front wheel. Position the magnet so it passes within 5mm of the sensor as the wheel rotates.
3. Ensure the sensor and magnet are securely fastened and do not interfere with wheel rotation or braking.

4.4. Пачатковая канфігурацыя

After battery installation, the computer will typically prompt you for initial settings. Use the buttons (usually MODE and SET) to navigate and confirm selections.

• Адзінкі: Select between metric (km/h, km) and imperial (mph, miles) units.
• Памер колы: Input your wheel circumference in millimeters (mm). Refer to your bicycle tire for this value or measure it accurately. This is crucial for accurate speed and distance readings.
• Час: Set the current time (24-hour or 12-hour format).
• Вага: Enter your body weight for calorie calculation.

5. Інструкцыя па эксплуатацыі

The M-Wave M30HCW features an LED backlit display for easy reading and is operated via buttons, typically located on the front or bottom of the unit.

5.1. Асноўныя функцыі

The computer automatically powers on and off. When you start cycling, it will activate and begin recording data. When stationary, it will enter a power-saving mode.

• Бягучая хуткасць: Паказвае хуткасць вашай язды на ровары ў рэжыме рэальнага часу.
• Сярэдняя хуткасць: Shows the average speed for your current ride.
• Максімальная хуткасць: Records the highest speed achieved during your ride.
• Адлегласць паездкі: Measures the distance covered in the current ride.
• одометр: Tracks the total accumulated distance.
• Час паездкі: Records the duration of your current ride.
• Кадэнцыя: Measures your pedaling revolutions per minute (RPM).
• вышынямер: Provides altitude measurements for climb tracking.
• Heart Rate Monitor/Alarm: (If applicable, requires compatible HR sensor, not included with base unit) Monitors heart rate and can alert if thresholds are exceeded.
• Calorie Consumption: Estimates calories burned based on ride data and user weight.
• Тэрмометр: Паказвае тэмпературу навакольнага асяроддзя.

5.2. Аперацыя кнопкі

Typically, the computer will have one or two buttons for navigation and selection:

• Кнопка MODE: Press briefly to cycle through different display modes (e.g., speed, distance, time). Press and hold to enter settings or reset trip data.
• Кнопка SET: Used to confirm selections or adjust values within settings menus.

Refer to the on-screen prompts for specific button functions during setup and operation.

6. Тэхнічнае абслугоўванне

• Уборка: Wipe the computer unit and sensor with a soft, damp тканіна. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
• Воданепранікальнасць: The device is IP44 rated, protecting it from splashing water. Avoid high-pressure washing or submerging the unit.
• Замена батарэі: Replace batteries when the low battery indicator appears on the display. Ensure proper battery type and polarity.
• захоўванне: If storing the bicycle for an extended period, remove the batteries from the computer and sensor to prevent leakage.

7. Выпраўленне непаладак

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

For warranty information and technical support, please refer to the documentation provided with your purchase or contact M-Wave customer service directly. Keep your proof of purchase for any warranty claims.