Важныя інструкцыі па бяспецы
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause property damage.
- ПАПЯРЭДЖАННЕ: Рызыка паражэння электрычным токам. Адключыце сілкаванне з дапамогай блока засцерагальнікаў або аўтаматычнага выключальніка перад устаноўкай або абслугоўваннем.
- Усе электрычныя падключэнні павінны адпавядаць мясцовым нормам, пастановам або Нацыянальнаму электрычнаму кодэксу (NEC). Звярніцеся да кваліфікаванага электрыка, калі вы не знаёмыя з правільнымі падключэннямі электрычнай праводкі.
- This fixture is designed for indoor, dry location use only. Do not install in wet or damp раёнах.
- Пераканайцеся, што паверхня для мацавання можа вытрымаць вагу прыстасавання.
- Прапанова 65 Папярэджанне: Гэты прадукт можа ўтрымліваць хімічныя рэчывы, вядомыя штату Каліфорнія, якія выклікаюць рак і прыроджаныя дэфекты альбо іншую шкоду рэпрадукцыі.
Прадукт скончаныview
The EGLO Tarbes 3-Light Pendant is an adjustable lighting fixture designed for indoor use, suitable for kitchen islands, hallways, and dining rooms. It features three individual pendant lights with geometric metal shades, suspended from a linear canopy. The fixture is finished in matte black, offering a contemporary aesthetic.

Image: EGLO Tarbes 3-Light Pendant Fixture. This image shows the complete pendant light fixture with three individual lights, each featuring a geometric metal shade, suspended from a linear bar in matte black finish.
Змест пакета
Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer support for assistance.
- Light Fixture Assembly (Canopy, Suspension Rods, 3 Pendant Shades with Sockets)
- Mounting Hardware (Crossbar, Mounting Screws, Wire Nuts)
- Кіраўніцтва па эксплуатацыі
Note: Light bulbs are not included and must be purchased separately.
Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Марка | ЭГЛО |
| Нумар мадэлі | 94189А |
| Колер | Матавы чорны |
| Матэрыял | Метал (свяцільня), шкло (абажур) |
| стыль | Contemporary / Transitional |
| Бланк свяцільні | Кулон |
| Выкарыстанне ў памяшканні/на вуліцы | У памяшканні |
| Крыніца харчавання | Правадная электрычная |
| Крыніца святла | Incandescent (E26 base recommended) |
| Колькасць крыніц святла | 3 |
| тtage | 120 вольт |
| Ватtage (Max per bulb) | 100 ват |
| Тып мацавання | Выступоўцы |
| Неабходная зборка | так |
| Атэстацыя | У спісе UL |
| Памеры прадмета (Д х Ш х У) | 31.06" x 6.3" x 10.5" (Fixture body) |
| Рэгуляваная вышыня | Up to 72 inches (total height) |
| Вага прадмета | 4.43 фунта |

Image: EGLO Tarbes 3-Light Pendant with dimensions. This diagram illustrates the overall dimensions of the fixture, including the 31.06-inch length of the bar, 6.3-inch width of the shades, and an adjustable maximum hanging height of 72 inches. It also indicates "Indoor" use and "3 x 100W E26" bulb requirements.
Кіраўніцтва па ўстаноўцы
Неабходныя інструменты (не ўключаны):
- Выкрутка для галоўкі Філіпс
- Адвёртка з плоскай галоўкай
- Сродкі для зачысткі правадоў
- Электрычная стужка
- Лесвіца
- Ахоўныя акуляры
Пакрокавая ўстаноўка:
- Выключыць харчаванне: Before starting, ensure the power to the circuit at the circuit breaker or fuse box is completely OFF. This is a critical safety step.
- Падрыхтуйце мантажную паверхню: If replacing an existing fixture, carefully remove it. Ensure the junction box is securely mounted and capable of supporting the fixture's weight.
- Install Mounting Crossbar: Attach the mounting crossbar to the junction box using the provided mounting screws. Ensure it is firmly secured.
- Adjust Pendant Height: The length of each pendant cord can be adjusted. Determine the desired hanging height for each light. Loosen the set screw on the canopy where the cord enters, adjust the cord to the desired length, and then tighten the set screw to secure it. Repeat for all three pendants.
- Зрабіце электрычныя злучэнні:
- Падключыце чорны провад ад прыстасавання да чорны (Live) wire from the junction box using a wire nut.
- Падключыце белы провад ад прыстасавання да белы (Neutral) wire from the junction box using a wire nut.
- Падключыце зямлю провад (голы медны або зялёны) ад прыстасавання да зямлю wire from the junction box and to the mounting crossbar's ground screw.
- Ensure all wire nuts are securely tightened and connections are covered with electrical tape if necessary.
- Mount Fixture Canopy: Carefully tuck all wires into the junction box. Align the fixture canopy with the mounting screws on the crossbar and secure it in place using the provided cap nuts or screws.
- Усталяваць лямпачкі: Screw in three (3) incandescent bulbs with an E26 base, not exceeding 100 watts each.
- Аднавіць сілу: Once installation is complete and all connections are secure, restore power at the circuit breaker or fuse box. Test the fixture.

Image: EGLO Tarbes 3-Light Pendant installed over a kitchen island. This image demonstrates the fixture's appearance in a typical home environment, highlighting its use over a kitchen island.
Інструкцыя па эксплуатацыі
This pendant light fixture operates with standard wall switches. Ensure appropriate E26 base incandescent bulbs (max 100W per bulb) are installed. The fixture is designed for use with 120V electrical systems.
- Уключэнне/выключэнне харчавання: Use the wall switch connected to the fixture to turn the lights on or off.
- Тып лямпы: Use E26 base bulbs. Incandescent bulbs up to 100 watts per socket are supported. For energy efficiency, LED or CFL bulbs with an E26 base can also be used, provided their wattage equivalent does not exceed 100W and they are compatible with the fixture's electrical system.
Тэхнічнае абслугоўванне
Уборка:
- Перад чысткай заўсёды адключайце сілкаванне.
- Працярыце прыбор мяккай сухой тканінай.
- Do not use harsh chemicals, abrasive cleaners, or polishes as they may damage the finish.
Замена лямпачкі:
- Ensure the power is OFF and the bulbs have cooled completely before attempting to replace them.
- Carefully unscrew the old bulb from the socket.
- Screw in a new E26 base bulb, ensuring it does not exceed 100 watts.
- Аднавіце электрасілкаванне і праверце новую лямпачку.
Ліквідацыю непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Святло не ўключаецца. |
|
|
| Мільгае святло. |
|
|
Інфармацыя аб гарантыі
EGLO products are covered by a Гарантыя 1 год from the date of original shipment when purchased on Amazon. This warranty covers items and conditions identified in the original manufacturer's warranty. Additionally, a 30-дзённая палітыка замены дэталяў is in place to ensure a fully working item.
Выключэнні: The warranty specifically does not cover loss and theft, water damage, customer abuse, and finish deterioration due to UV or coastal exposure.
Падтрымка кліентаў
For further assistance, missing parts, or warranty claims, please contact EGLO customer support.
You can visit the official EGLO store on Amazon for more information and contact options: EGLO Amazon Store