Chanzon 5mm Blue LED Diode Lights Instruction Manual

Уводзіны

This manual provides essential information for the safe and effective use of your Chanzon 5mm Blue LED Diode Lights. These are clear round transparent light-emitting diodes designed for various electronics projects and lighting applications. Each pack contains 100 pieces, offering super bright blue illumination at DC 3V 20mA.

Chanzon 5mm Blue LED Diodes in packaging with a single LED and illuminated blue light example — Image: A pack of 100 Chanzon 5mm Blue LED Diodes, showcasing the clear transparent lens, along with an individual LED and an example of its bright blue light.

Настройка

Before connecting the LEDs, ensure your power source matches the specified voltage and current requirements to prevent damage. These LEDs are designed for DC 3 Volt operation with a typical current of 20 mA.

Палярнасць

LEDs are polarized components, meaning they must be connected in the correct orientation. Incorrect polarity will prevent the LED from lighting up and could potentially damage it if excessive voltagе ўжываецца.

Anode (+): The longer lead of the LED. This connects to the positive terminal of your power supply.
Cathode (-): The shorter lead of the LED. This connects to the negative (ground) terminal of your power supply.

Close-up of a single 5mm LED diode showing its two leads — Выява: Падрабязны view of a single 5mm LED diode, highlighting its two leads. The longer lead is the anode (+), and the shorter lead is the cathode (-).

Illuminated blue LED diode in a dark setting — Image: A Chanzon 5mm Blue LED diode illuminated, demonstrating its bright blue light output in a low-light environment.

Інструкцыя па эксплуатацыі

These 5mm blue LEDs operate optimally at a forward voltage of 3 Volts and a forward current of 20 mA. It is recommended to use a current-limiting resistor in series with the LED to protect it from excessive current, especially when using a power supply higher than 3V. Consult an LED resistor calculator for appropriate resistor values based on your power supply voltage.

Тыповыя прымянення

DIY PCB Circuits
Arduino Projects and Experiments
Светавыя індыкатары
Hobby Projects
Educational Electronics

Video: An official Chanzon video demonstrating various 3mm and 5mm LED diode lights, including clear and diffused lens types, and their application on a breadboard for electronics projects.

Тэхнічныя характарыстыкі

Detailed technical specifications for the Chanzon 5mm Blue LED Diode Lights:

Атрыбут	Каштоўнасць
Тып прадукту	LED Diode Lights
Памер	5mm Round Top
Колер	Blue (450nm-455nm)
Тып аб'ектыва	Ясна празрысты
Наперад Voltagе (Vf)	DC 3 Volt (3.0-3.2V)
Forward Current (If)	20 мА
Viewing кут	30 градусаў
Інтэнсіўнасць святла	7000-8000 мкд
Канфігурацыя кантактаў	Through Hole DIP 2-pins
Палярнасць	Anode (Longer Part) \| Cathode (Shorter Part)
Матэрыял	медзь
Памеры прадукту	6.3 x 5.51 x 0.71 цалі (упакоўка)
Нумар мадэлі тавару	100F5T-YT-WH-BL

Table of 5mm Clear Lens LED specifications including wavelength, luminous intensity, forward voltagе, і viewing angle for various colors — Image: A table detailing the optical and electrical characteristics of 5mm clear lens LEDs, including wavelength, luminous intensity, forward voltagе, і viewing angle for different colors.

Dimensional drawing of a 5mm LED diode with measurements in millimeters and inches — Image: A technical drawing illustrating the precise dimensions of a 5mm LED diode, including lens diameter, lead length, and spacing, with measurements provided in both millimeters and inches.

Тэхнічнае абслугоўванне

Chanzon LED diodes are designed for long-term reliability with minimal maintenance. Keep them stored in a dry, cool environment away from direct sunlight and extreme temperatures when not in use. Avoid bending the leads repeatedly or with excessive force, as this can cause internal damage. Ensure proper heat dissipation in high-density applications to maintain optimal performance and lifespan.

Ліквідацыю непаладак

Святлодыёд не загараецца:
- Check polarity: Ensure the longer lead (anode) is connected to positive and the shorter lead (cathode) to negative.
- Verify power supply: Confirm the power supply is providing the correct voltage (DC 3V) and sufficient current.
- Check connections: Ensure all connections are secure and there are no loose wires or cold solder joints.
- Resistor value: If using a resistor, ensure its value is correct for your power supply voltage and the LED's current requirements. An incorrect resistor can prevent the LED from lighting or cause it to burn out.
- Damaged LED: Test the LED with a known good power source and resistor. If it still doesn't light, the LED may be damaged.
LED is Dim:
- Insufficient current: The LED may not be receiving enough current. Check your power supply and resistor value.
- тtage drop: Ensure there isn't excessive voltage drop across other components in your circuit.
LED Burns Out Quickly:
- Excessive current/voltage: The LED is likely receiving too much current or voltage. Always use a current-limiting resistor.
- Incorrect polarity: While usually preventing light, prolonged incorrect polarity with high voltage can damage the LED.

Гарантыя і падтрымка

For any questions, technical assistance, or support regarding your Chanzon 5mm Blue LED Diode Lights, please refer to the official Chanzon store or contact their customer service directly. While specific warranty details are not provided in this manual, Chanzon is committed to providing quality products and support to its customers.

Наведайце ст CHANZON Store для атрымання дадатковай інфармацыі і прапаноў прадуктаў.

CHANZON 100F5T-YT-WH-BL