Simplex 4906-9127 A/V Multi-Candela Non-Addressable Horn Strobe Wall Mount User Manual

Уводзіны

This manual provides essential information for the proper installation, operation, and maintenance of the Simplex 4906-9127 A/V Multi-Candela Non-Addressable Horn Strobe Wall Mount. This device is designed to provide audible and visual notification in fire alarm systems, ensuring safety and compliance with relevant standards. Please read these instructions thoroughly before proceeding with installation or operation.

Настройка і ўстаноўка

The Simplex 4906-9127 is a wall-mount device. Proper installation is crucial for its effective operation and compliance with fire safety regulations. Refer to local and national electrical codes, as well as NFPA 72, for specific requirements.

Мантаж

1. Выберыце месцазнаходжанне: Choose a wall location that provides optimal visibility for the strobe and audibility for the horn, free from obstructions. Ensure the mounting surface is flat and secure.
2. Падрыхтуйце праводку: Run the necessary wiring (regulated 24 DC) to the chosen mounting location. Ensure power is disconnected before beginning any wiring.
3. Надзейная мантажная пласціна: Attach the device's mounting plate securely to the wall using appropriate fasteners.
4. Падключэнне правадоў: Connect the field wiring to the device terminals as per the wiring diagram provided in the installation instructions (refer to document 579-548 REV. H). Pay close attention to polarity.
5. Далучыць прыладу: Mount the horn strobe assembly onto the secured mounting plate.

Wiring and Power Requirements

This device operates on a regulated 24 DC voltage. The maximum DC operating current varies based on the candela setting:

• 75mA @ 15cd
• 116mA @ 30cd
• 221mA @ 75cd
• 285mA @ 110cd

Ensure the power supply can adequately support the total current draw of all connected devices at their selected candela settings.

Малюнак 1: Спераду view of the Simplex 4906-9127 A/V Multi-Candela Horn Strobe.

Малюнак 2: бок view of the Simplex 4906-9127 A/V Multi-Candela Horn Strobe.

Figure 3: Product label detailing technical specifications and certifications for the Simplex 4906-9127. Key information includes ID No. 4906-9127, Installation Instructions 579-548 REV. H, Regulated 24 DC Voltage, and Maximum DC Operating Current values for 15cd, 30cd, 75cd, and 110cd settings. ULC (Anechoic) Sound Pressure levels are 88 dBA (Steady) and 94 dBA (Coded). The device is UL Listed (US 697 B) and FM Approved, manufactured in Mexico.

Figure 4: Simplex 4906-9127 units in their original packaging. Each box label confirms the Product ID (PID) as 4906-9127 and Part No. 0743254, indicating these are A/V Multi-Candela Non-Addressable devices.

Інструкцыя па эксплуатацыі

The Simplex 4906-9127 operates as an audible and visual notification appliance within a fire alarm system. It is designed to activate upon receiving a signal from a compatible fire alarm control panel.

Функцыянальнасць

• гудок: Produces a loud audible signal to alert occupants. The sound pressure levels are 88 dBA for steady tone and 94 dBA for coded tone (ULC Anechoic).
• Строб: Emits bright, flashing light to provide visual notification, particularly important for individuals with hearing impairments or in noisy environments. The multi-candela settings allow for adjustment of light output.

Upon activation, both the horn and strobe will operate simultaneously to provide comprehensive notification.

Тэхнічнае абслугоўванне

Regular maintenance ensures the continued reliability and effectiveness of your Simplex 4906-9127 horn strobe. All maintenance should be performed by qualified personnel.

Планавы агляд

• Візуальная праверка: Periodically inspect the device for any physical damage, discoloration, or obstructions to the horn grille or strobe lens.
• Праверка функцыянальнасці: Conduct regular functional tests as required by local codes and NFPA 72. This typically involves activating the fire alarm system to ensure the horn sounds and the strobe flashes.

Уборка

If dust or dirt accumulates on the device, gently wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or the strobe lens.

Ліквідацыю непаладак

If your Simplex 4906-9127 horn strobe is not functioning as expected, consider the following common issues. For complex problems, always contact a qualified fire alarm technician.

Агульныя праблемы

• No Horn Sound/Strobe Flash:
  • Check power supply: Ensure the device is receiving the correct regulated 24 DC voltage.
  • Verify wiring: Confirm all connections are secure and correctly polarized.
  • Inspect for damage: Look for any visible damage to the device or wiring.
• Weak Horn Sound/Strobe Flash:
  • Check candela setting: Ensure the device is set to the appropriate candela output for its location.
  • Clean lens/grille: Remove any dust or obstructions that might impede sound or light output.
• Ілжывыя трывогі:
  • This typically indicates an issue with the fire alarm control panel or initiating devices, not the notification appliance itself. Consult your fire alarm system documentation.

If troubleshooting steps do not resolve the issue, contact a certified fire alarm service provider for assistance.

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

The Simplex 4906-9127 A/V Multi-Candela Non-Addressable Horn Strobe comes with a Гарантыя 12 месяцаў з даты пакупкі. Акрамя таго, 30-дзённая палітыка вяртання is available if you are not satisfied with the product.

For any questions regarding our products or your orders, a dedicated customer service team is available to assist you. Please refer to your purchase documentation for specific contact details or visit the official Simplex webсайт для рэсурсаў падтрымкі.