CHANZON 200W Warm White COB LED Chip Instruction Manual

1. Уводзіны

This manual provides essential information for the safe and effective use of your CHANZON 200W Warm White COB LED Chip. This high-power LED component is designed for various lighting applications, offering high brightness and efficiency. Please read these instructions carefully before installation and operation.

Image 1.1: CHANZON 200W Warm White COB LED Chip. This image displays the top view of the square-shaped COB LED chip, featuring a yellow light-emitting surface encased in a white frame.

2. Тэхнічныя характарыстыкі

The following table details the key specifications for the CHANZON 200W Warm White COB LED Chip:

Image 2.1: CHANZON COB LED Chip Specification Table. This image presents a table outlining various specifications (Power, Color, Color Temperature, Forward Voltage, Forward Current, Luminous Flux) for different wattage CHANZON LED chips, including the 200W model.

3. Настройка і ўстаноўка

Proper installation is crucial for the performance and longevity of your LED chip. Follow these guidelines:

1. крыніца харчавання: Use a constant current LED driver that matches the recommended current (6000mA) and forward voltage (30-34V) for this 200W chip. An incompatible power supply can damage the LED.
2. Heat Sink System: A robust heat sink system is mandatory. The working temperature of the LED chip must be maintained below 60°C (140°F) to ensure its rated lifespan. Insufficient cooling will lead to rapid degradation and failure.
3. Палярнасць: Carefully identify the positive (anode +) and negative (cathode -) terminals on the LED chip before connecting. Incorrect polarity will cause immediate damage. Refer to the markings on the chip.
4. Мантаж: Securely mount the LED chip to the heat sink using thermal paste or thermal adhesive to ensure efficient heat transfer.

Image 3.1: 200W LED Chip Dimensions. This image shows a diagram with precise measurements (66mm x 60mm x 6.2mm) of the 200W LED chip, essential for designing or selecting an appropriate heat sink.

Image 3.2: LED Chip Internal Structure and Polarity. This image highlights the internal components, including the 100% copper holder and 2 gold wires, and clearly indicates the Anode (+) terminal for correct wiring.

4. Інструкцыя па эксплуатацыі

Once properly installed with a suitable power supply and heat sink, the CHANZON 200W Warm White COB LED Chip can be operated as follows:

• Уключэнне: Connect the constant current LED driver to a compatible AC power source. The LED chip should illuminate instantly.
• Бесперапынная праца: Ensure continuous and adequate cooling during operation. Monitor the temperature of the heat sink if possible.
• Абарона вачэй: The LED chip emits very bright light. Avoid looking directly into the illuminated chip to prevent eye strain or damage.

Image 4.1: Warm White LED Light Output. This image demonstrates the warm white light emitted by the LED chip, showing its color temperature range of 3000-3500K.

5. Тэхнічнае абслугоўванне

Minimal maintenance is required for the LED chip itself, but proper care of the cooling system is essential:

• Маніторынг тэмпературы: Regularly ensure the operating temperature remains below 60°C (140°F).
• Heat Sink Cleaning: Periodically inspect the heat sink for dust accumulation or obstructions. Clean as necessary to maintain optimal airflow and heat dissipation.
• Праверка злучэння: Occasionally verify that all electrical connections are secure and free from corrosion.

6. Выпраўленне непаладак

If you encounter issues with your LED chip, consider the following troubleshooting steps:

• Святлодыёд не загараецца:
  • Check the power supply: Ensure it is a constant current driver with the correct voltage (30-34V) and current (6000mA).
  • Verify polarity: Confirm that the positive (+) and negative (-) terminals are connected correctly.
  • Inspect connections: Ensure all wires are securely connected and there are no loose contacts.
• LED Flickering or Dim:
  • Check power supply output: The driver might not be providing stable current or voltage.
  • Assess heat dissipation: Inadequate cooling can lead to reduced performance and flickering. Ensure the heat sink is effective and clean.
  • Inspect for damage: Look for any visible damage to the chip or wiring.
• LED Overheating:
  • Improve heat sink: Ensure the heat sink is adequately sized for a 200W LED and has proper thermal contact.
  • Enhance airflow: If using active cooling (fan), ensure it is functioning correctly and not obstructed.
  • Verify ambient temperature: Operating in excessively hot environments can hinder cooling.

7. Гарантыя і падтрымка

Specific warranty details for this product are not provided in the available information. For any product support or inquiries, please refer to the CHANZON brand's official channels or the retailer from whom the product was purchased.

Image 7.1: CHANZON 200W LED Chip Packaging. This image shows the product in its clear plastic packaging, with a label indicating the model (AA0514x1), name (200W LED), color (Warm White 3000-3500K), and electrical specifications (6000mA, 30-34V).