Southwire AMMW1

Woods AMMW1 Analog Multimeter Instruction Manual

Model: AMMW1 | Brand: Southwire

1. Уводзіны

This manual provides detailed instructions for the safe and effective operation, maintenance, and troubleshooting of the Woods AMMW1 Analog Multimeter. Please read this manual thoroughly before using the device and retain it for future reference.

The Woods AMMW1 is a versatile analog multimeter designed for basic electrical measurements, offering 5 functions with up to 16 measuring ranges. It is rated CAT II 500V UL.

2. Інфармацыя па бяспецы

WARNING: To avoid electric shock or personal injury, always follow basic safety precautions when using this instrument.

  • Always ensure the test leads are in good condition and properly connected.
  • Не спрабуйце вымераць аб'ёмtages or currents exceeding the maximum rated values for each range.
  • Always turn off power to the circuit under test before connecting or disconnecting test leads.
  • Будзьце асцярожныя пры працы з voltagвышэй за 30 В пераменнага току (RMS), 42 В пікавага значэння або 60 В пастаяннага току, бо яны ўяўляюць небяспеку паражэння электрычным токам.
  • Replace the battery and fuse only with the specified types.
  • Do not operate the multimeter if it appears damaged or if the case is open.

3. Прадукт скончыўсяview

The Woods AMMW1 Analog Multimeter features a clear analog display and a rotary selector for various measurement functions.

Woods AMMW1 Analog Multimeter front view

Figure 1: Woods AMMW1 Analog Multimeter. This image displays the front of the multimeter, showing the analog display with various scales (OHMS, AC DC, AC10V BATT), the Woods logo, the model number AMMW1, the rotary function selector switch, and the input jacks for VΩmA and COM. An 'ADJUST Ω' knob is visible on the right side, and 'FUSE & DIODE PROTECTION' is indicated below the display.

3.1 Асноўныя кампаненты

  1. Аналагавы дысплей: Shows measurement readings using a needle against various scales.
  2. Rotary Function Selector: Used to select the desired measurement function and range (e.g., ACV, DCV, Resistance, Current, Battery Test).
  3. Уваходны раз'ём VΩmA: Positive (+) input for voltagвымярэнні электроннага струму, супраціўлення і току.
  4. Уваходны гняздо COM: Common/Negative (-) input for all measurements.
  5. OHMS Adjustment Knob: Выкарыстоўваецца для абнулення вымяральніка пры вымярэнні супраціўлення.
  6. Battery Test Sockets: Dedicated sockets for testing 1.5V and 9V batteries.

4. Настройка

4.1 Устаноўка батарэі

The Woods AMMW1 requires 1 AA battery (included) for operation. To install or replace the battery:

  1. Ensure the multimeter is turned off (selector switch to OFF position, if available, or a non-measurement range).
  2. Знайдзіце вечка батарэйнага адсека на задняй панэлі прылады.
  3. Выкруціце шрубу(ы), якая(ыя) мацуе вечка, і асцярожна адкрыйце яго.
  4. Insert the AA battery, observing the correct polarity (+ and - markings).
  5. Replace the cover and secure it with the screw(s).

4.2 Падключэнне вымяральных правадоў

  • Устаўце чорны тэставы провад у COM (Звычайны) гняздо.
  • Устаўце чырвоны тэставы провад у VΩmA jack for most measurements (voltage, resistance, current).

5. Інструкцыя па эксплуатацыі

Before taking any measurement, ensure the test leads are correctly connected and the rotary selector is set to the appropriate function and range.

5.1 Вымярэнне пастаяннага току Voltagе (V-)

  1. Set the rotary selector to the desired DC Voltage (V-) range (e.g., 2.5V, 10V, 50V, 250V, 500V). Choose a range higher than the expected voltage.
  2. Падключыце чырвоны вымяральны кабель да станоўчага (+) полюса ланцуга, а чорны — да адмоўнага (-).
  3. Прачытайце тtage value from the appropriate DCV scale on the analog display.

5.2 Вымярэнне AC Voltagе (V~)

  1. Set the rotary selector to the desired AC Voltage (V~) range (e.g., 10V, 50V, 250V, 500V). Choose a range higher than the expected voltage.
  2. Падключыце вымяральныя дроты да сеткі пераменнага току.tagэлектронная крыніца.
  3. Прачытайце тtage value from the appropriate ACV scale on the analog display.

5.3 Вымярэнне супраціўлення (Ом)

  1. Set the rotary selector to the desired Resistance (Ω) range (e.g., 10x Ω, 1000x Ω).
  2. Short the red and black test leads together.
  3. Адрэгулюйце OHMS ADJUST knob until the needle points exactly to '0' on the OHMS scale. This zeros the meter.
  4. Connect the test leads across the component whose resistance you wish to measure. Ensure the component is de-energized.
  5. Read the value from the OHMS scale and multiply it by the range multiplier (e.g., x10, x1000).

5.4 Measuring DC Current (mA, µA)

  1. ПАПЯРЭДЖАННЕ: Never connect the multimeter in parallel with a voltage source when measuring current. Always connect it in series with the circuit.
  2. Set the rotary selector to the desired DC Current (mA or µA) range (e.g., 500 µA, 10 mA, 250 mA).
  3. Разарвіце ланцуг у тым месцы, дзе вы хочаце вымераць сілу току.
  4. Connect the multimeter in series with the circuit, ensuring the red lead is towards the higher potential and the black lead towards the lower potential.
  5. Зчытайце бягучае значэнне з адпаведнай шкалы.

5.5 Battery Testing (1.5V, 9V)

  1. Set the rotary selector to the 1.5V BATT or 9V BATT становішча.
  2. Insert the battery to be tested into the corresponding battery test sockets, observing polarity.
  3. Read the battery condition from the dedicated "BAD / GOOD" scale on the analog display.

6. Тэхнічнае абслугоўванне

6.1 Ачыстка

Працярыце корпус рэкламайamp тканіну і мяккі мыйны сродак. Не выкарыстоўвайце абразіўныя сродкі або растваральнікі. Трымайце вымяральныя калодкі чыстымі і без смецця.

6.2 Замена засцерагальніка

The multimeter is equipped with fuse and diode protection. If the current measurement function stops working, the fuse may need replacement.

  1. Пераканайцеся, што мультыметр выключаны, а вымяральныя дроты адключаны.
  2. Open the back cover of the multimeter (refer to battery installation).
  3. Акуратна выміце стары засцерагальнік.
  4. Replace with a fuse of the exact same type and rating (consult the device's internal markings or specifications for fuse type).
  5. Надзейна зачыніце заднюю крышку.

7. Выпраўленне непаладак

праблемаМагчымая прычынаРашэнне
Няма паказанняў / стрэлка не рухаеццаDead battery; Incorrect range selected; Open circuit; Faulty test leads.Check/replace battery; Select appropriate range; Verify circuit continuity; Check test leads for damage.
Няправільныя паказанніIncorrect range; Poor contact; OHMS not zeroed (for resistance).Select a more appropriate range; Ensure good contact with test points; Zero OHMS before resistance measurement.
Вымярэнне току не працуеПерагарэў засцерагальнік.Replace the fuse (refer to Maintenance section).

8. Тэхнічныя характарыстыкі

  • мадэль: AMMW1
  • Марка: Southwire (Woods)
  • Тып вымярэння: Аналагавы мультиметр
  • Функцыі: 5 (DC Voltagе, AC Voltage, DC Current, Resistance, Battery Test)
  • Дыяпазоны вымярэнняў: Да 16
  • Максімальная аперацыйная аб'ёмtage: CAT II 500В
  • акумулятар: 1 батарэйка АА (у камплекце)
  • Тэст батарэі: 1.5В, 9В
  • Памеры прадукту: 21.79 х 12.9 х 5.59 см
  • Вага прадмета: 136 г
  • Адпаведнасць: UL
  • UPC: 032886958403

9. Гарантыя і падтрымка

For warranty information or technical support, please contact Southwire customer service. Retain your proof of purchase for warranty claims.

Note: Specific warranty terms and contact details may vary by region. Please refer to the packaging or manufacturer's webсайт для атрымання самай свежай інфармацыі.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.