Кіраўніцтва карыстальніка настольнага мікрафона Proxel AV-908

1. Уводзіны

Thank you for choosing the Proxel AV-908 Desktop Microphone. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device. Please read this manual thoroughly before using the microphone to ensure optimal performance and safety.

2. Інфармацыя па бяспецы

• крыніца харчавання: Use only the specified 9V DC power supply or a compatible 9V battery. Incorrect voltage можа пашкодзіць прыладу.
• Асяроддзе: Do not expose the microphone to water, moisture, extreme temperatures, or direct sunlight. Operate in a dry, stable environment.
• Апрацоўка: Асцярожна звяртайцеся з прыладай. Пазбягайце падзення або моцных удараў.
• Вентыляцыя: Забяспечце належную вентыляцыю вакол прылады, каб прадухіліць перагрэў.
• Уборка: Адключыце сілкаванне перад чысткай. Выкарыстоўвайце мяккую сухую тканіну. Не выкарыстоўвайце вадкія ачышчальнікі або аэразолі.
• Абслугоўванне: Не спрабуйце адкрываць або рамантаваць прыладу самастойна. Звяртайцеся па любыя паслугі па абслугоўванні да кваліфікаванага персаналу.

3. Змесціва ўпакоўкі

Калі ласка, праверце ўпакоўку на наяўнасць наступных прадметаў:

• Proxel AV-908 Desktop Microphone Unit
• Connection Cable with RJ-45 Connector and Bare Wires
• Кіраўніцтва карыстальніка (гэты дакумент)

4. Прадукт скончыўсяview

The Proxel AV-908 is a high-sensitivity desktop microphone designed for clear and consistent vocal transmission. It features an integrated dynamic vocal compressor and a graphic equalizer for enhanced audio control.

Figure 1: Proxel AV-908 Desktop Microphone. The image displays the Proxel AV-908 desktop microphone unit. It features a main base unit with various controls and a display, and a flexible gooseneck microphone extending upwards from the base. The base includes sliders for the graphic equalizer and buttons for operation.

Асноўныя характарыстыкі:

• High-sensitivity ceramic microphone capsule.
• Integrated dynamic vocal compressor with High, Med, and Low modes for consistent audio levels.
• 4-element graphic equalizer (270, 540, 1000, 2000 Hz) for fine-tuning audio output.
• Built-in modulation prevention circuit with a 30-second alarm for prolonged transmission.
• Integrated battery test circuit to check power supply status.

5. Настройка

1. Падключэнне сілкавання: Insert a 9V battery into the battery compartment located on the underside of the unit, observing polarity. Alternatively, connect a compatible 9V DC power adapter (not included) to the DC input jack.
2. Радыёзлучэнне: Connect the supplied RJ-45 cable to the microphone's output port. Connect the other end of the cable (RJ-45 or bare wires, depending on your radio model) to the microphone input of your ICOM, YAESU, or Kenwood radio. Refer to your radio's manual for specific wiring diagrams if using bare wires.
3. Размяшчэнне: Place the microphone on a stable, flat surface away from sources of interference. Adjust the gooseneck microphone to a comfortable speaking position.

6. Інструкцыя па эксплуатацыі

6.1 Power On/Off and Battery Test

• To power on the unit, press the power button. The battery test circuit will briefly display the battery charge level and supply voltage.
• Каб выключыць, націсніце кнопку харчавання яшчэ раз.

6.2 Dynamic Vocal Compressor

The integrated dynamic vocal compressor helps maintain a consistent audio output level, reducing distortion. Select one of the following modes:

• Высокі: Provides 45dB of compression, suitable for very consistent audio.
• Сярэдняя: Provides 30dB of compression, a balanced setting for most uses.
• Нізкі: Provides 10dB of compression, for minimal audio leveling.

Adjust the compressor mode using the dedicated switch or buttons on the unit.

6.3 Графічны эквалайзер

The 4-element graphic equalizer allows you to fine-tune your audio for optimal performance in FM and SSB modes, especially for DX (long-distance) communication. Adjust the sliders for the following frequencies:

• 270 Гц
• 540 Гц
• 1000 Гц
• 2000 Гц

Each element has a range of +12dB. Experiment with settings to achieve the desired audio quality for your voice and operating conditions.

6.4 Modulation Prevention Circuit

This circuit provides an audible alarm for 30 seconds if a prolonged transmission is detected. After the alarm, the unit will automatically return to receive mode to prevent accidental continuous transmission.

7. Тэхнічнае абслугоўванне

• Уборка: Regularly wipe the microphone and base unit with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
• Замена батарэі: When the battery test indicates low power, replace the 9V battery promptly to ensure consistent performance.
• захоўванне: If storing the microphone for an extended period, remove the battery to prevent leakage. Store in a cool, dry place.

8. Выпраўленне непаладак

9. Тэхнічныя характарыстыкі

10. Гарантыя і падтрымка

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your local Proxel dealer. You may also visit the official Proxel brand store for more information:

Proxel Official Store

Please have your product model (AV-908) and purchase details ready when contacting support.