Good Earth Lighting BO1065-WHG-06LF6-E

Ecolight 6-inch LED Motion Utility Light

Model: BO1065-WHG-06LF6-E | Brand: Good Earth Lighting

Уводзіны

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Ecolight Battery-Operated 6-inch LED Dual Lens Motion Utility Light. Please read this manual thoroughly before using the product to ensure proper function and safety.

Інфармацыя па бяспецы

  • Пераканайцеся, што батарэйкі ўстаўлены з правільнай палярнасцю.
  • Не змешвайце старыя і новыя батарэі або розныя тыпы батарэй.
  • Выміце батарэйкі, калі ліхтар не будзе выкарыстоўвацца працяглы час.
  • This product is designed for dry locations only. Avoid exposure to water or high humidity.
  • Захоўваць у месцах, недаступных дзецям.

Змест пакета

Перад усталёўкай пераканайцеся, што ўсе кампаненты наяўныя:

  • 1 x Ecolight 6-inch LED Motion Utility Light
  • 3 батарэйкі АА (уключаны)
  • 4 x Small Damage-Free Picture Hanging Command Strips by 3M
Ecolight 6-inch LED Motion Utility Light packaging showing contents
Figure 1: Product packaging illustrating the included components.

Настройка і ўстаноўка

The Ecolight Motion Utility Light is designed for easy, flexible, and damage-free mounting using the included 3M Command Strips. No wiring is required.

Крок 1: Падрыхтуйце святло

  1. Зніміце заднюю крышку свяцільні.
  2. Locate and remove the clear plastic tab from the battery compartment. This activates the included AA batteries.
  3. Усталюйце заднюю крышку.
Топ view of the Ecolight 6-inch LED Motion Utility Light
Малюнак 2: Верх view of the light, showing the motion sensor and light lenses.

Крок 2: Падрыхтуйце мантажную паверхню

  • Choose a clean, dry, and smooth surface for mounting.
  • Clean the surface with rubbing alcohol and a clean cloth. Allow it to dry completely. Do not use household cleaners.

Step 3: Apply Command Strips

  1. Separate the two interlocking strips from each pair.
  2. Firmly press two strips together until they click. Repeat for all four strips.
  3. Remove the green liner from one side of each paired strip.
  4. Apply these strips to the designated flat areas on the back of the light. Press firmly.
  5. Remove the remaining liner from the exposed side of each strip.

Step 4: Mount the Light

  • Align the light with the prepared surface.
  • Press the light firmly against the surface for 30 seconds to ensure strong adhesion.
Ecolight 6-inch LED Motion Utility Light installed under a kitchen cabinet
Figure 3: The utility light installed under a cabinet, providing illumination.

For a visual guide on installation and removal, please refer to the official product video:

Video 1: Official installation and removal guide for the Ecolight Motion Utility Light. This video demonstrates the steps for setting up and safely removing the light using Command Strips.

Інструкцыя па эксплуатацыі

The Ecolight Motion Utility Light features motion-activated operation and an auto-off timer for energy efficiency.

  • Актывацыя руху: The integrated 100-degree Passive Infrared (PIR) sensor detects motion up to 12 feet away. The light will only activate when it is dark and motion is detected, conserving battery life.
  • Таймер аўтаматычнага выключэння: After the light activates and no further motion is detected, it will automatically turn off after 30 seconds.

Тэхнічнае абслугоўванне

Замена батарэі

When the light output diminishes, it is time to replace the batteries.

  1. Carefully remove the light from its mounting surface. If using Command Strips, follow the removal instructions (pull tab straight down slowly).
  2. Зніміце заднюю крышку свяцільні.
  3. Replace the three (3) AA batteries with new ones, ensuring correct polarity (+/-).
  4. Усталюйце заднюю крышку.
  5. Re-mount the light using new Command Strips if necessary, following the installation steps.

The light is rated for 52 hours of illumination on a full battery charge.

Ліквідацыю непаладак

праблема Магчымая прычына Рашэнне
Святло не ўключаецца. Батарэі разраджаны або ўсталяваны няправільна. Замяніце батарэйкі, сачыце за правільнай палярнасцю.
Святло ўключаецца ў светлы час сутак. Sensor is detecting insufficient ambient light. Ensure the light is installed in an area that is sufficiently dark for motion activation.
Light does not detect motion reliably. Sensor obstructed or outside detection range. Clear any obstructions from the sensor. Ensure motion occurs within 12 feet and 100 degrees of the sensor.
Святло занадта хутка выключаецца. No continuous motion detected within 30 seconds. This is normal operation. The light is designed to turn off after 30 seconds of no detected motion to conserve battery life.

Тэхнічныя характарыстыкі

  • Нумар мадэлі: BO1065-WHG-06LF6-E
  • Памеры: 6 х 2.5 х 1.1 цалі (Д х Ш х У)
  • Вага прадмета: 6.4 унцыі
  • Крыніца харчавання: Battery powered (3 x AA batteries, included)
  • тtage: 4.5 В (пастаянны ток)
  • Ватtage: 6 ват
  • Тып лямпы: святлодыёд
  • Светлавы паток: 80 люмен
  • Каляровая тэмпература: 4000K (Bright, neutral white light)
  • Датчык руху: 100-degree PIR sensor, detects motion up to 12 ft.
  • Таймер аўтаматычнага выключэння: 30 секунд (пасля таго, як рух не выяўлены)
  • Lamp жыццё: Да 30,000 гадзін
  • Тэрмін службы батарэі: Approximately 52 hours of illumination on a full charge
  • Спосаб ўстаноўкі: Wall-mounted (with included 3M Command Strips)
  • выкарыстанне: Толькі ў сухім месцы
  • матэрыял: Пластыкавыя
  • колер: Белы

Гарантыя

This Ecolight Motion Utility Light comes with a 6-гадовая абмежаваная гарантыя. For details regarding warranty coverage and claims, please refer to the product packaging or contact Good Earth Lighting customer support.

Падтрымка

For further assistance, technical support, or inquiries, please contact Good Earth Lighting customer service. Contact information can typically be found on the product packaging or the manufacturer's official webсайт.

вытворца: Добрае асвятленне зямлі

Webсайт: Good Earth Lighting Store on Amazon

© 2024 Good Earth Lighting. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.