WAC Lighting 3021-27WT

WAC Landscape Lighting Cone LED 12V Deck and Patio Light Instruction Manual

Мадэль: 3021-27WT

1. Інфармацыя па бяспецы

Please read these instructions carefully before installation and retain them for future reference. Failure to follow these instructions may result in electric shock, fire, or other hazards.

  • Электрабяспека: This product operates on a 12V AC/DC low voltage system. A compatible 12V magnetic or electronic power supply (transformer) is required and sold separately. Do not connect directly to 120V AC.
  • Ўстаноўка: Installation should be performed by a qualified electrician or trained professional in accordance with local electrical codes. Ensure power is disconnected at the source before installation or servicing.
  • Выкарыстанне на адкрытым паветры: The fixture is IP66 rated, indicating protection against high-pressure water jets and outdoor elements. Ensure all connections are watertight using the provided gel-filled wire nuts.
  • Зацямненне: For dimming functionality, use a Magnetic Low Voltage (MLV) dimmer (sold separately).
  • Цэласнасць прадукту: Не ўносіце змены ў канструкцыю прыбора. Любыя мадыфікацыі могуць ануляваць гарантыю і стварыць пагрозу бяспецы.

2. Змесціва ўпакоўкі

Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя.

  • WAC Landscape Lighting Cone LED Deck and Patio Light (Model 3021-27WT)
  • 3-foot lead wire (attached to fixture)
  • 2 x Ideal Direct Burial Wire Nuts (gel-filled)
  • Hardware Pack for Surface Mount
WAC Landscape Lighting Cone LED Deck and Patio Light, white, with attached wire and wire nuts

Image: The WAC Landscape Lighting Cone LED Deck and Patio Light in white, showing the attached lead wire and two gel-filled direct burial wire nuts.

3. Усталёўка і налада

This fixture is designed for surface mounting on a flat surface, such as a 4x4 post or deck railing. A 12V AC/DC landscape lighting transformer (sold separately) is required.

3.1 Неабходныя інструменты (не ўключаны)

  • Дрыль
  • Drill bits appropriate for mounting surface and wire passage
  • Адвёртка
  • Прылады для зачысткі правадоў
  • тtagэлектронны тэстар

3.2 Этапы ўстаноўкі

  1. Адключыць харчаванне: Ensure the power supply to the landscape lighting system is turned off at the main breaker or transformer.
  2. Падрыхтуйце мантажную паверхню: Select a suitable location for the light. The fixture is designed to fit cleanly on a 4x4 post without hanging off the sides. Mark the desired mounting points for the screws from the hardware pack.
  3. Прасвідраваць пілотныя адтуліны: Drill pilot holes for the mounting screws. If routing the wire through the mounting surface, drill an additional hole for the lead wire.
  4. Устанавіце свяцільня: Secure the light fixture to the mounting surface using the provided hardware. Ensure it is firmly attached.
  5. Падключэнне правадоў:
    • Strip approximately 1/2 inch of insulation from the ends of the fixture's lead wire and the main low voltage landscape wire.
    • Twist the exposed copper wires together (one from the fixture to one from the main wire).
    • Secure each connection with a gel-filled direct burial wire nut. Twist the wire nut clockwise until tight. The gel inside the nut will seal the connection, protecting it from moisture.
    • Bury the wire connections underground or ensure they are otherwise protected and concealed.
  6. Connect to Transformer: Connect the main low voltage landscape wire to your 12V AC/DC landscape lighting transformer (sold separately). Refer to your transformer's manual for specific connection instructions.
  7. Аднавіць сілу: Once all connections are secure and properly insulated, restore power to the landscape lighting system.
WAC Landscape Lighting 12V Power Supply Transformer

Малюнак: Example of a WAC Landscape Lighting 12V power supply transformer, required for operation (sold separately).

Відэа: Оверview of WAC Deck & Patio lights, demonstrating their design and suitability for various installations. This video provides visual context for the product line.

4. Аперацыя

The WAC Landscape Lighting Cone LED Deck and Patio Light operates automatically when connected to a compatible 12V landscape lighting system controlled by a timer or photocell (not included). The light will illuminate when power is supplied to the low voltagэлектронная схема.

  • Уключэнне/выключэнне харчавання: Control the light by turning the 12V landscape lighting transformer on or off.
  • Зацямненне: If connected to a Magnetic Low Voltage (MLV) dimmer, the brightness can be adjusted smoothly and continuously down to 10% of its maximum output.
  • Святлоаддача: This model provides 2700K Warm LED light, offering a soft, inviting glow suitable for decks, patios, and pathways.
Comparison of 2700K Warm and 3000K Warm White LED light output

Image: A visual comparison showing the difference between 2700K Warm light (left) and 3000K Warm White light (right). This specific model emits 2700K Warm light.

5. Тэхнічнае абслугоўванне

The WAC Landscape Lighting Cone LED Deck and Patio Light is designed for minimal maintenance. The built-in LED has a rated life of 50,000 hours.

  • Уборка: Перыядычна чысціце прыбор мяккай губкайamp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents, as these can damage the finish or lens.
  • агляд: Annually inspect the wiring and connections for any signs of wear, damage, or corrosion. Ensure wire nuts remain securely fastened.
  • Замена святлодыёда: The LED is built-in and not user-replaceable. If the LED fails within the warranty period, contact customer support.

6. Выпраўленне непаладак

If your WAC Landscape Lighting Cone LED Deck and Patio Light is not functioning as expected, refer to the following common issues and solutions:

праблемаМагчымая прычынаРашэнне
Святло не ўключаецца.
  • Няма харчавання на трансфарматары.
  • Loose or faulty wire connections.
  • Няспраўны трансфарматар.
  • Damaged fixture.
  • Check if the transformer is plugged in and receiving power. Verify circuit breaker.
  • Inspect all wire connections, ensuring they are tight and properly sealed with wire nuts.
  • Праверце выхадны аб'ём трансфарматараtagд. Пры неабходнасці заменіце.
  • If other lights on the same circuit work, the fixture may be faulty. Contact customer support.
Святло мігціць або цьмянае.
  • Insufficient power from transformer.
  • Няшчыльныя правадныя злучэнні.
  • Несумяшчальны дымер.
  • Ensure the transformer wattage is sufficient for all connected lights.
  • Праверце і зацягніце ўсе правадныя злучэнні.
  • If using a dimmer, ensure it is a Magnetic Low Voltage (MLV) dimmer.
Вада ўнутры прыбора.
  • Няправільна герметычныя злучэнні правадоў.
  • Damage to the fixture housing.
  • Ensure wire nuts are twisted tightly and fully encapsulate the wire connection.
  • Inspect the fixture for cracks or damage. Contact customer support if damaged.

7. Тэхнічныя характарыстыкі

АсаблівасцьДэталь
Нумар мадэлі3021-27WT
МаркаWAC асвятленне
Памеры прадукту3.38" Д x 1.63" Ш x 3.21" У
МатэрыялАлюміній
КолерБелы
Крыніца святлаУбудаваны святлодыёд
Уваходны кнtage9-15V AC / DC
Энергаспажыванне2.8 Вт (4.6 ВА)
ЯркасцьUp to 60 Lumens (90 Lumens max)
Каляровая тэмпература2700K Warm LED
Індэкс колераперадачы (CRI)90
Намінальныя гадзіны50,000 гадзіны
ЗацямненнеSmooth and continuous to 10% with MLV dimmer (sold separately)
Рэйтынг IPIP66 (Factory sealed water tight)
СертыфікатыUL & cUL 1838, EPA, Energy Star, FCC
Уключаныя кампанентыFixture, 3ft lead wire, 2x direct burial wire nuts, hardware pack
Line drawing with dimensions of the WAC Cone LED Deck Light

Image: Technical line drawing showing the dimensions of the WAC Cone LED Deck and Patio Light.

8. Гарантыя і падтрымка

Гарантыя: This WAC Landscape Lighting product is covered by a 10-year functional warranty and a 2-year finish warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

Выключэнні: The warranty does not cover damage caused by improper installation, misuse, abuse, accidents, modifications, or acts of nature. It also does not cover normal wear and tear or consumable parts.

Падтрымка кліентаў: For technical assistance, warranty claims, or replacement parts, please contact WAC Lighting customer service. Have your model number (3021-27WT) and proof of purchase ready.

WAC Lighting Contact Information:

  • Наведайце ст WAC Lighting Store on Amazon для атрымання дадатковай інфармацыі.
  • Refer to the official WAC Landscape Lighting webсайт для атрымання непасрэдных кантактных дадзеных.

© 2024 WAC Lighting. All rights reserved.

This manual is for informational purposes only. WAC Lighting reserves the right to change product specifications without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.