LEDGlow 8-Piece Bluetooth Advanced Million Color LED Motorcycle Lighting Kit

Уводзіны

This manual provides detailed instructions for the installation, operation, and maintenance of your LEDGlow 8-Piece Bluetooth Advanced Million Color LED Motorcycle Lighting Kit. This kit is designed to enhance your motorcycle's appearance with customizable, ultra-bright multi-color accent lighting controlled via a smartphone app or wireless remotes.

Што ўключана

Your LEDGlow 8-Piece Bluetooth Advanced Million Color LED Motorcycle Lighting Kit includes the following components:

• 2 x 10-inch Flexible Million Color LED Lighting Strips
• 2 x 8-inch Flexible Million Color LED Lighting Strips
• 2 x 6-inch Flexible Million Color LED Lighting Strips
• 2 x 4-inch Flexible Million Color LED Lighting Strips
• 1 x Bluetooth Control Box with Power, Ground, and Brake Control Wires
• 2 x 2-foot 6-piece Power Harnesses
• 2 x Wireless Remotes
• 2 x Crimp-on Ring Terminals
• Double-sided Tape for Control Box Mounting
• Сцяжкі для кіравання кабелямі
• Кіраўніцтва па ўстаноўцы

Image: All components of the LEDGlow 8-Piece Bluetooth Advanced Million Color LED Motorcycle Lighting Kit as packaged.

Image: All components of the LEDGlow 8-Piece Bluetooth Advanced Million Color LED Motorcycle Lighting Kit laid out for inspection.

Настройка і ўстаноўка

Proper installation is crucial for optimal performance and longevity of your lighting kit. Please follow these general guidelines and refer to the included detailed installation guide for specific steps.

Падрыхтоўка

• Ensure the motorcycle's surface is clean and dry before applying LED strips.
• Plan the placement of each LED strip and the control box to ensure wires can be routed discreetly and securely.
• Disconnect the motorcycle's battery before beginning any electrical work.

Электрасхема

Image: Detailed wiring diagram for the LEDGlow 8-Piece Bluetooth Advanced Million Color LED Motorcycle Lighting Kit, showing connections for the control box, power harnesses, and LED strips.

Этапы ўстаноўкі

1. Мантаж святлодыёдных стужак: Use the pre-applied adhesive backing to attach the flexible LED strips to desired locations on your motorcycle. Ensure surfaces are clean and free of debris for a secure bond.
2. Connect Power Harnesses: Connect the LED strips to the two 6-piece power harnesses. Each strip has 3 feet of power wire for flexible routing.
3. Install Control Box: Mount the waterproof Bluetooth control box in a secure, hidden location using the provided double-sided tape.
4. Connect Power and Ground: Connect the control box's power and ground wires to your motorcycle's 12V power source (e.g., battery terminals) using the crimp-on ring terminals.
5. Connect Brake Light Wire: Connect the brake control wire from the control box to your motorcycle's brake light circuit for the automatic brake light feature.
6. Бяспечная правадка: Use zip ties to neatly route and secure all wiring, preventing interference with moving parts and protecting against damage.
7. Паўторнае падключэнне батарэі: Пасля таго, як усе злучэнні будуць надзейнымі і праверанымі, зноў падключыце акумулятар матацыкла.

Інструкцыя па эксплуатацыі

Your LEDGlow lighting kit can be controlled via the dedicated smartphone app or the included wireless remotes.

Кіраванне праграмамі для смартфона

The LEDGlow Motorcycle Control App is available for iOS and Android devices. Download it from the App Store or Google Play Store.

1. Спалучэнне: Enable Bluetooth on your smartphone and open the LEDGlow app. The app will automatically connect to the control box.
2. Выбар колеру: Use the color wheel within the app to select any solid color.
3. Яркасць і хуткасць: Adjust the brightness and speed of lighting effects using the dedicated sliders.
4. Рэжымы асвятлення: Choose from 10 unique lighting modes, including various fades, strobes, and color cycles.
5. Прэсеты: Save up to 5 of your favorite color and pattern combinations for quick access.
6. Двухзоннае кіраванне: Customize colors and patterns independently for two separate sections of your motorcycle.
7. Automatic Brake Lights: When enabled in the app settings, the entire bike will illuminate red in unison with your motorcycle's brake lights.
8. Аварыйныя агні: Activate the hazard lights feature from the app settings.
9. Нізкі абtage Shut Off: This safety feature automatically turns off the kit if the battery voltage drops below 10V for more than 60 seconds, preventing battery drain.

Image: The main interface of the LEDGlow Motorcycle Control App, featuring the color wheel, brightness, speed, and mode selection.

Image: The settings screen of the LEDGlow Motorcycle Control App, showing options for Dual Zone Control, Brake Light Feature, Brake Pulse Feature, Hazard Lights, and Low Voltage Shut Off.

Image: A motorcycle demonstrating the automatic brake light feature, where the LED accent lights turn red when the brakes are applied.

Бесправадныя пульты

Two wireless remotes are included for convenient control of basic functions, such as power on/off and cycling through colors/modes, without needing your smartphone.

Тэхнічнае абслугоўванне

To ensure the longevity and optimal performance of your LEDGlow lighting kit, follow these maintenance tips:

• Уборка: Gently wipe LED strips and the control box with a damp cloth to remove dirt and debris. Avoid harsh chemicals or abrasive cleaners.
• Праверкі злучэння: Перыядычна правярайце ўсе злучэнні правадоў, каб пераканацца ў іх надзейнасці і адсутнасці карозіі.
• Strip Integrity: Check LED strips for any signs of damage or wear. While waterproof, extreme physical impact can compromise their integrity.

Ліквідацыю непаладак

If you encounter issues with your LEDGlow lighting kit, refer to the following common troubleshooting steps:

• Святло не ўключаецца:
  • Check all power and ground connections to ensure they are secure.
  • Verify the motorcycle battery has sufficient charge.
  • Inspect the fuse on the power wire for the control box; replace if blown.
• Праграма не падключаецца:
  • Пераканайцеся, што Bluetooth уключаны на вашым смартфоне.
  • Restart the LEDGlow app.
  • Пераканайцеся, што блок кіравання ўключаны.
  • Паспрабуйце перазагрузіць смартфон.
• Непаслядоўнае асвятленне:
  • Check connections to individual LED strips for looseness.
  • Пераканайцеся, што ніякія правады не пераціснутыя або пашкоджаныя.
• Brake Lights Not Activating:
  • Verify the brake control wire is correctly connected to the motorcycle's brake light circuit.
  • Ensure the 'Automatic Brake Lights' feature is enabled in the app settings.

For further assistance, please contact LEDGlow Technical Support.

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

LEDGlow provides a One Year Limited Warranty for this product. Additionally, free lifetime technical support is available to assist you with any questions or issues you may encounter.

For technical support or warranty claims, please refer to the contact information provided in your product packaging or visit the official LEDGlow webсайт.