Rhino Rack RL150GMC Leg Brackets User Manual

1. Уводзіны

The Rhino-Rack RL Leg Brackets (Model RL150GMC) are heavy-duty legs specifically designed for mounting roof rack systems to vehicle gutter mounts. These legs provide a secure and stable foundation for carrying various loads on your vehicle's roof. The RL150GMC model offers a 150mm height, suitable for vehicles requiring medium clearance. These legs are built for durability and compatibility with a wide range of Rhino-Rack accessories, including those for light off-road use.

2. Інфармацыя па бяспецы

• Заўсёды пераканайцеся, што ўсе кампаненты надзейна замацаваны перад пачаткам руху.
• Do not exceed the maximum load capacity of your vehicle's roof or the roof rack system. Refer to your vehicle's owner's manual for specific load limits.
• Regularly check all bolts, nuts, and straps for tightness, especially after initial installation and before long trips.
• Distribute weight evenly across the roof rack to maintain vehicle stability.
• Майце на ўвазе павелічэнне вышыні і шырыні аўтамабіля пры перавозцы грузаў, асабліва пры ўездзе ў гаражы, аўтамыйкі або месцы з нізкім клірансам.
• Avoid sudden maneuvers, hard braking, or sharp turns when carrying heavy or bulky items.
• For off-road use, reduce speed and exercise extreme caution.

3. Змесціва ўпакоўкі

The Rhino Rack RL150GMC Leg Brackets package typically includes the following components:

• RL Leg Brackets (x2)
• Мантажныя элементы (балты, гайкі, шайбы)
• Rubber Gaskets/Pads for protection
• End Caps for crossbars
• Rubber Strips for crossbar channels
• Necessary Tools (e.g., Allen key, wrench)
• Fitting Instructions (this manual)

4. Тэхнічныя характарыстыкі

5. Кіраўніцтва па ўстаноўцы

Follow these steps carefully for proper installation of your Rhino Rack RL150GMC Leg Brackets. It is recommended to have a second person assist during installation.

5.1. Prepare the Crossbars and Brackets

1. Identify the front and rear crossbars. The pointed end of the crossbar should face towards the rear of your vehicle, and the round end towards the front.
2. Install the short screws onto the brackets, but do not tighten them fully at this stage.
3. Carefully pull out a section of the rubber strip from the back of the crossbar.
4. Slide the brackets onto the crossbar with the loosened screws.
5. Attach the sponge pad to the base foot of each bracket.
6. Insert the metal end caps into the ends of the crossbars and secure them with the provided screws.

5.2. Marking and Drilling

Важна: Before drilling, ensure there are no roof supports or cross braces where your holes will be. Measure carefully.

7. Position the assembled crossbars on your vehicle's roof to determine the desired locations for the leg brackets.
8. Use a pen or marker to accurately draw the location of the holes to be drilled on the vehicle's roof, corresponding to the bracket positions.
9. Using an appropriate drill bit, carefully drill holes at the marked locations.

5.3. Securing the Brackets

10. Align each bracket above its drilled hole.
11. Insert the long screw through the bracket and into the drilled hole in the roof.
12. From the inside of the vehicle (or underside of the roof), install the nut and washer onto the screw.
13. Apply waterproof caulking to all important spots around the drilled holes and screws to prevent water leakage.
14. Adjust the position of the brackets as needed and then securely tighten all screws.

5.4. Відэа па ўстаноўцы

For visual guidance, please refer to the following installation videos:

6. Інструкцыя па эксплуатацыі

Once the RL Leg Brackets and associated crossbars are securely installed, you can begin using your roof rack system.

• Пагрузка грузу: Place items on the crossbars, ensuring even weight distribution. Use appropriate tie-downs or cargo straps to secure all items firmly.
• Сумяшчальнасць аксесуараў: The RL Leg Brackets are compatible with a wide range of Rhino-Rack accessories. Ensure any accessories used are correctly installed and rated for your intended load.
• Абмежаванні па вазе: Always adhere to the maximum load capacity of your roof rack system and your vehicle. Overloading can lead to damage or unsafe driving conditions.
• Кіраванне з грузам: Drive cautiously, especially at higher speeds or in windy conditions. Increased drag and weight can affect vehicle handling and fuel efficiency.

7. Тэхнічнае абслугоўванне

Proper maintenance will ensure the longevity and safe operation of your Rhino Rack RL150GMC Leg Brackets.

• Рэгулярныя праверкі: Periodically check all bolts, nuts, and mounting points for tightness. Re-tighten as necessary.
• Чысціня: Clean the leg brackets and crossbars regularly with mild soap and water to remove dirt, grime, and road salt. Avoid harsh chemicals that may damage the finish.
• Гумовыя кампаненты: Inspect rubber gaskets and strips for wear, cracks, or damage. Replace if necessary to maintain proper sealing and friction.
• Прадухіленне карозіі: If operating in corrosive environments (e.g., coastal areas, salted roads), rinse the system frequently and apply a corrosion inhibitor to metal parts.
• Сезоннае выдаленне: If the roof rack is not used for extended periods, consider removing it to reduce wear and tear and improve fuel efficiency.

8. Выпраўленне непаладак

Вось некаторыя распаўсюджаныя праблемы і іх магчымыя рашэнні:

• Issue: Excessive Wind Noise
  рашэнне: Ensure all rubber strips are properly seated in the crossbar channels. Check that the crossbars are correctly positioned and tightened. Some wind noise is normal with roof rack systems.
• Issue: Loose Components
  рашэнне: Re-check and tighten all mounting bolts and screws. Ensure the leg brackets are firmly seated on the vehicle's gutter mounts.
• Issue: Water Leakage Around Mounting Points
  рашэнне: Verify that waterproof caulking was applied correctly during installation. Reapply or add more caulking if gaps are present. Ensure all washers and nuts are securely tightened.
• Issue: Difficulty Attaching Accessories
  рашэнне: Ensure you are using compatible Rhino-Rack accessories. Check that the T-slots in the crossbars are clear of debris and that accessory mounting hardware is correctly aligned.

9. Гарантыя і падтрымка

The Rhino Rack RL150GMC Leg Brackets come with a 5-гадовая гарантыя вытворцыГэтая гарантыя распаўсюджваецца на дэфекты матэрыялаў і вырабу пры нармальным выкарыстанні і абслугоўванні.

For warranty claims, technical support, or further assistance, please contact Rhino-Rack USA, LLC directly or visit their official webсайт. Захоўвайце пацвярджэнне пакупкі для пацверджання гарантыі.

Для атрымання дадатковай інфармацыі наведайце афіцыйны сайт Rhino Rack Store.