KOKKO FLP2 Mini SOS Looper Pedal

1. Уводзіны

Дзякуй за пакупкуasing the KOKKO FLP2 Mini SOS Looper Pedal. This compact and versatile guitar effect pedal is designed to provide musicians with an easy-to-use looping solution. It allows for recording, overdubbing, and playback of guitar phrases, enhancing practice sessions and live performances. Please read this manual carefully to ensure proper operation and to get the most out of your new looper pedal.

2. Асаблівасці прадукту

• Maximum loop time of 5 minutes.
• Seamless overdubbing capability over existing riffs.
• Undo and redo functions for the last recorded riff.
• LED indicator for clear status display (recording, playback, idle).
• True bypass functionality when no loop is active.

3. Элементы кіравання і індыкатары

Малюнак 1: Спераду view of the KOKKO FLP2 Looper Pedal with labeled components.

• LOOP LEVEL Knob: Controls the playback volume of the recorded loop.
• 6.35 мм выхад: Standard 1/4-inch audio output jack to connect to an amplifier або іншыя эфекты.
• Святлодыёдны індыкатар: Displays the current status of the looper pedal.
• 6.35 мм Уваход: Standard 1/4-inch audio input jack for your guitar or other instrument.
• Нажны перамыкач: Multi-functional switch for recording, playback, overdubbing, undo/redo, and clearing loops.
• Power In (9V DC/300mA with center negative): Power input jack for connecting an external 9V DC power adapter.

4. Настройка

1. Падключэнне сілкавання: Connect a 9V DC power adapter (center negative, minimum 300mA, not included) to the 'Power In' jack on the pedal. Ensure the power adapter meets these specifications to prevent damage.
2. Падключэнне інструмента: Connect your guitar or instrument to the '6.35mm Input' jack using a standard 1/4-inch instrument cable.
3. Выходнае злучэнне: Connect the '6.35mm Output' jack to your amplifier or the input of another effects pedal using a standard 1/4-inch instrument cable.
4. Рэгуляванне гучнасці: Set the 'LOOP LEVEL' knob to a low position initially and adjust it as needed during operation.

Малюнак 2: Задняя частка view of the KOKKO FLP2 Looper Pedal, highlighting the power input specifications.

5. Інструкцыя па эксплуатацыі

The KOKKO FLP2 Looper Pedal operates using a single multi-functional footswitch and an LED indicator. The LED changes color to indicate different modes:

• Зялёны святлодыёд: Рэжым прайгравання.
• Чырвоны святлодыёд: Recording or Overdubbing mode.
• Святлодыёд выключаны: True Bypass mode (no loop active).

5.1. Recording a Loop

1. Ensure the LED is off (True Bypass mode).
2. Single press the footswitch to start recording. The LED will turn RED.
3. Прайграйце патрэбную фразу.
4. Single press the footswitch again to stop recording and start playback. The LED will turn GREEN.

5.2. Overdubbing

1. While a loop is playing (GREEN LED), single press the footswitch to enter overdub mode. The LED will turn RED.
2. Play your new phrase over the existing loop.
3. Single press the footswitch again to stop overdubbing and continue playback with the new layer. The LED will turn GREEN.
4. You can overdub multiple layers infinitely, up to the maximum loop time of 5 minutes.

5.3. Undo/Redo Last Riff

• Адмяніць: During playback (GREEN LED), press and hold the footswitch for longer than 1.5 seconds to undo the last recorded riff. The LED will flash GREEN briefly.
• Паўтарыць: After undoing a riff, press and hold the footswitch again for longer than 1.5 seconds to redo the previously undone riff. The LED will flash GREEN briefly.

5.4. Спыненне прайгравання

During playback (GREEN LED), double press the footswitch quickly to stop the loop. The LED will turn GREEN and then turn off, indicating the loop is stopped but still stored in memory.

5.5. Clearing the Loop

1. To clear the stored loop, ensure the loop is stopped (LED off).
2. Press and hold the footswitch for longer than 1.5 seconds. The LED will flash RED briefly, indicating the loop has been cleared.
3. The pedal is now in True Bypass mode, ready to record a new loop.

6. Тэхнічныя характарыстыкі

Figure 3: KOKKO FLP2 Looper Pedal dimensions.

7. Тэхнічнае абслугоўванне

• Keep the pedal clean and dry. Avoid exposure to moisture or extreme temperatures.
• Для чысткі выкарыстоўвайце мяккую сухую тканіну. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
• Ensure all cable connections are secure before use.
• Калі прылада не выкарыстоўваецца працяглы час, адключыце адаптар сілкавання.

8. Выпраўленне непаладак

• Няма харчавання: Ensure the 9V DC power adapter is correctly connected and meets the specified requirements (center negative, minimum 300mA). The pedal does not operate on batteries.
• Няма гуку: Check all instrument cable connections. Ensure the 'LOOP LEVEL' knob is not set to minimum. Verify your amplifier and instrument are working correctly.
• Loop Not Recording/Playing: Ensure the pedal is in the correct mode (RED LED for recording, GREEN LED for playback). If the LED is off, single press the footswitch to start recording.
• Непажаданы шум: Check for faulty cables or interference from other electronic devices. Ensure your power supply is regulated.

9. Інфармацыя аб гарантыі

This KOKKO FLP2 Mini SOS Looper Pedal comes with a one-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects but does not cover damage caused by misuse, unauthorized modifications, or improper power supply.

10. Кантактная інфармацыя і падтрымка

For further assistance or technical support, please visit the official KOKKO webсайт або звярніцеся да мясцовага дылера.