Stelpro UHC2002WCW
Stelpro Uniwatt UHC2002WCW Convector Heater User Manual
Model: UHC2002WCW | Brand: Stelpro
1. Інфармацыя па бяспецы
Важныя інструкцыі па бяспецы:
- Абараніце прыладу адпаведнымі аўтаматычнымі выключальнікамі або засцерагальнікамі ў адпаведнасці з інструкцыямі на заводскай таблічцы.
- Пераканайцеся, што аб'ём пастаўкіtage (вольт) адпавядае значэнню, пазначанаму на заводскай таблічцы.
- Гэты прыбор павінен быць заземлены. Выкарыстоўвайце толькі медныя праваднікі.
- Выкарыстоўвайце шнуры харчавання, прыдатныя для тэмпературы 75°C (167°F).
- Перад устаноўкай, рамонтам і чысткай адключыце электрасілкаванне прылады на выключальніку/засцерагальніку.
- Ensure that the unit is designed for the intended use (consult the product catalog or a representative if necessary).
- Рэкамендуемая магутнасць нагрэву: 1.25 Вт/кубічны фут (0.03 м³).
2. Прадукт скончыўсяview
The Stelpro Uniwatt UHC2002WCW is a modern, surface-mounted convector heater designed for quiet operation and efficient heating in various indoor spaces. This model provides 2000 watts of heating capacity at 240V (1500W at 208V) and requires an external wall thermostat for temperature control.
Асноўныя характарыстыкі:
- Магутнасць ацяплення: 2000W (240V) / 1500W (208V), suitable for large rooms.
- кантроль: Requires an external wall thermostat (sold separately).
- Ціхая праца: Engineered for minimal noise.
- дызайн: Sleek, modern look with rounded corners and a durable steel cabinet.
- Ўстаноўка: Designed for surface mounting with a concealed bracket.
- матэрыял: 22-gauge steel front and cabinet.
- асаблівасць: Cool Touch Exterior.
Кампаненты прадукту:
This image displays the front of the Stelpro Uniwatt UHC2002WCW convector heater, highlighting its clean white finish and the top air outlet grille.
Падрабязны view of the heater's durable white finish, which is an epoxy-polyester powdercoat designed for a crisp matte look.
На гэтым малюнку паказаны бакавы прафесіяналfile of the convector heater, emphasizing its slim design which allows it to blend discreetly into any room.
An illustration detailing the physical dimensions of the heater, including its width, height, and depth, crucial for planning installation space.
3. Настройка і ўстаноўка
This convector heater is designed for surface mounting and hardwired electric connection. Ensure all safety precautions are followed before beginning installation.
3.1 Determining Heating Requirements:
Before installation, determine the appropriate wattage for your space. The recommended heating capacity is 1.25 W per cubic foot (0.03 m³).
This table provides a guide to determine the required power (in watts) based on the area to be heated (in square feet or square meters), helping users select the correct heater for their space.
3.2 Мантаж абагравальніка:
The heater features a concealed mounting bracket for a clean and professional appearance. Refer to the detailed instructions provided in the packaging for specific mounting steps.
This image illustrates the concealed mounting bracket, which allows the heater to be securely attached to the wall while maintaining a sleek, integrated look.
This image highlights the ease of installation for the convector heater, emphasizing its user-friendly design for mounting.
3.3 Электрычнае падключэнне:
This unit requires a 240V hardwired electric connection. Ensure the power supply is off at the circuit breaker before making any electrical connections. Connect the black and red wires, and ensure the ground wire is securely attached.
A diagram showing the necessary wiring for a 240V hardwired connection, including the black, red, and ground wires, for safe and proper electrical setup.
Video: Stelpro SOR1 High-End Convector Overview
Гэта відэа забяспечвае завяршэннеview of a Stelpro high-end convector, demonstrating its features and design, which may be similar to the UHC2002WCW model.
4. Аперацыя
The UHC2002WCW convector heater operates in conjunction with an external wall thermostat (sold separately). This thermostat will control the heater's on/off cycles to maintain the desired room temperature.
4.1 Втtage Налады:
The heater includes an internal switch to select between 1000W and 2000W output. This allows for flexibility based on the heating needs of the room. To adjust the wattage, the front panel must be removed, and the switch located inside the unit should be toggled. Always ensure the power supply is disconnected before accessing internal components.
This image shows the internal components of the heater, specifically highlighting the switch that allows users to select between 1000W and 2000W heating modes.
4.2 Thermostat Control:
Once installed and wired, the heater will respond to the external wall thermostat. Set the desired temperature on your wall thermostat, and the heater will activate or deactivate to maintain that setting.
5. Тэхнічнае абслугоўванне
Regular maintenance ensures optimal performance and longevity of your convector heater. Always disconnect power at the circuit breaker before performing any maintenance.
- Уборка: Periodically wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the heater.
- Выдаленне пылу: Gently vacuum or brush away any dust accumulation from the air intake and outlet grilles.
- агляд: Annually inspect the power connections and mounting for any signs of wear or damage. If any issues are found, consult a qualified electrician.
6. Выпраўленне непаладак
If you experience issues with your heater, refer to the following common troubleshooting steps. For problems not listed here, contact customer support or a qualified electrician.
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Не ўключаецца абагравальнік. | No power supply; Thermostat set too low; Internal wattage switch off. | Check circuit breaker/fuse. Ensure thermostat is set above room temperature. Verify internal wattage switch is in 1000W or 2000W position (power off before checking). |
| Недастатковая цеплавая магутнасць. | Ватtage setting too low; Room size exceeds heater capacity; Airflow obstruction. | Check internal wattage switch (set to 2000W if needed). Ensure heater capacity matches room size. Clear any obstructions from grilles. |
| Незвычайныя гукі падчас працы. | Loose components; Dust accumulation in fan. | Ensure all mounting screws are tight. Clean fan and internal components (power off first). If noise persists, contact support. |
7. Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Марка | Стелпро |
| Нумар мадэлі | UHC2002WCW |
| Колер | Белы |
| Памеры прадукту | 88.9 х 10 х 44.61 см (35 х 3.9 х 17.5 цаляў); 8.57 кг (18.9 фунтаў) |
| Магутнасць/Ватtage | 2000 watts (at 240V) |
| тtage | 240 вольт |
| Матэрыял | сталь |
| Асаблівасць | Знешні выгляд Cool Touch |
| Спосаб нагрэву | Канвекцыя |
| Тып мацавання | Насценнае мацаванне |
| Выкарыстанне ў памяшканні/на вуліцы | У памяшканні |
| Месца бізнесу | Stelpro - 1041 Rue Parent, Saint-Bruno-de-Montarville, QC J3V 0A2 |
8. Гарантыя і падтрымка
Stelpro products are proudly made in Canada. For warranty information, technical support, or service inquiries, please refer to the official Stelpro webсайт або звярніцеся ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі для прэтэнзій па гарантыі.
This image features the "Proudly Made in Canada" logo, indicating the origin of Stelpro products.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.