Xfinity XR2 Version U2 Remote Control

Уводзіны

This manual provides detailed instructions for the Xfinity XR2 Remote Control, Version U2 (Model 4330952071). Designed for use with Comcast Xfinity DVRs, HD set-top boxes, and compatible televisions, this remote offers intuitive control with its ergonomic design and 20 clearly labeled buttons. It utilizes infrared (IR) technology for reliable signal transmission up to 10 meters and can control up to two devices.

Настройка

1. Устаноўка батарэй

The XR2 remote requires two (2) AA batteries for operation. To install:

1. Знайдзіце вечка батарэйнага адсека на задняй панэлі пульта дыстанцыйнага кіравання.
2. Slide the cover downwards and lift it off.
3. Устаўце дзве батарэйкі тыпу АА, пераканаўшыся, што станоўчая (+) і адмоўная (-) клемы правільна сумяшчаюцца з індыкатарамі ўнутры адсека.
4. Зачыніце вечка батарэйнага адсека, зрушыўшы яго назад да пстрычкі.

2. Спалучэнне пульта дыстанцыйнага кіравання

This remote can be paired with certain Comcast devices to enable full functionality. To determine if your device supports pairing and to initiate the process:

1. Націсніце і ўтрымлівайце Настройка button until the LED indicator on the remote changes from red to green, then release the button.
2. Націсніце XFINITY button, and then release it.
3. If the Pairing Screen is not displayed on your television, press the XFINITY button again, up to two more times.

If your device supports pairing, an instruction screen will be displayed on your television to guide you through the remaining steps. For more detailed information and troubleshooting, please visit: www.xfinity.com/remotes

Кіраванне пультам дыстанцыйнага кіравання

The Xfinity XR2 remote is designed for straightforward control of your entertainment system. It can control up to two devices: your Comcast cable box and a compatible television. The remote uses infrared (IR) signals, so ensure a clear line of sight between the remote and the devices you are controlling.

Асноўныя функцыі

• Магутнасць: Turns your cable box and/or TV on/off.
• Канал уверх/уніз: Changes channels on your cable box.
• Павялічыць/паменшыць гучнасць: Adjusts the volume of your television.
• Адключэнне гуку: Mutes the television audio.
• Кіраўніцтва: Accesses the program guide.
• Menu/Xfinity: Opens the main menu or Xfinity interface.
• Элементы кіравання прайграваннем: Play, Pause, Fast Forward, Rewind, Stop, Record for DVR functions.
• Навігацыйная панэль: Arrow buttons and OK for menu navigation.

Кантроль прылад

After initial setup and pairing, your remote should automatically control your cable box and TV. If you need to program the remote to control a specific TV brand or switch between devices, refer to the pairing instructions or the Xfinity remotes website for specific codes and procedures. The Настройка ключ у спалучэнні з ABCD keys can be used for programming specific cable box types (Xfinity, Cisco, SA, or Moto).

Тэхнічнае абслугоўванне

To ensure the longevity and optimal performance of your Xfinity XR2 remote:

• Замена батарэі: Replace batteries when the remote's response becomes sluggish or the LED indicator does not light up. Always replace both AA batteries at the same time.
• Уборка: Use a soft, dry cloth to clean the remote's surface. Avoid using liquid cleaners or abrasive materials, as these can damage the remote.
• захоўванне: Захоўвайце пульт у прахалодным, сухім месцы, удалечыні ад прамых сонечных прамянёў і экстрэмальных тэмператур.

Ліквідацыю непаладак

If you encounter issues with your Xfinity XR2 remote, try the following solutions:

• Пульт не адказвае: Ensure there is a clear line of sight between the remote and your devices. Check if the batteries are correctly installed and have sufficient charge. Replace batteries if necessary.
• Прылада не рэагуе на каманды: Verify that the remote is correctly paired with your cable box and television. Refer to the "Pairing the Remote" section or the Xfinity remotes website for re-pairing instructions.
• Абмежаваная функцыянальнасць: If certain buttons do not work, ensure the remote is programmed for the correct device (TV or cable box). Some advanced functions may require specific programming or may not be supported by all devices.
• Праблемы са святлодыёдным індыкатарам: If the LED does not light up during use, the batteries may be depleted or incorrectly inserted.

Тэхнічныя характарыстыкі

Інфармацыя аб гарантыі

For specific warranty details regarding your Xfinity XR2 remote control, please refer to the documentation provided at the time of purchase or contact Xfinity customer support directly. Warranty terms and conditions may vary.

Падтрымка

For additional assistance, troubleshooting tips, or to access the latest information regarding your Xfinity XR2 remote, please visit the official Xfinity support webсайт:

www.xfinity.com/remotes

You may also contact Xfinity customer service for personalized support.