V-TAC VT-5087 PIR Infrared Motion Sensor User Manual

Уводзіны

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your V-TAC VT-5087 PIR Infrared Motion Sensor. Please read this manual carefully before installation and retain it for future reference. This sensor is designed for ceiling mounting and automatically controls lighting based on detected motion.

Асноўныя характарыстыкі

PIR (Passive Infrared) Motion Detection
360-degree Detection Angle
Ceiling Mount Design
Adjustable LUX (Ambient Light) Sensitivity
Adjustable TIME Delay
Maximum Load: 1000W (LED) / 2000W (Traditional Lighting)

V-TAC VT-5087 PIR Infrared Motion Sensor with key features listed

Малюнак 1: V-TAC VT-5087 PIR Infrared Motion Sensor. This image highlights the sensor's capabilities, including a maximum load of 1000W for LED lighting, automatic on/off based on motion, and a 'SUN' setting for daylight operation (only works when natural light is 3 lux or less). Detection motion speed is 0.6-1.5m/s.

Настройка і ўстаноўка

Важная інфармацыя па бяспецы: Installation must be performed by a qualified electrician and in accordance with all local electrical codes. Ensure power is disconnected at the circuit breaker before beginning installation to prevent electric shock.

Месца мантажу

Choose a ceiling location where the sensor can cover the desired detection area without obstruction.
Avoid mounting near heat sources (e.g., air vents, heaters) or direct sunlight, as these can cause false triggers.
Ensure the mounting surface is stable and can support the sensor.

Інструкцыі па праводцы

Выключыце асноўную крыніцу харчавання з дапамогай аўтаматычнага выключальніка.
Асцярожна зніміце вонкавую крышкуasing of the sensor to access the wiring terminals.
Connect the live (L), neutral (N), and load (L') wires according to the diagram provided on the sensor or in the packaging. Typically:
- L: Live input from power supply
- N: Neutral input from power supply and neutral to load
- L': Switched live output to the light fixture (load)
Securely fasten the sensor to the ceiling using the provided screws and anchors.
Replace the outer casing.
Restore power and test the sensor.

Назад view of V-TAC VT-5087 sensor showing wiring terminals and adjustment knobs, with mounting screws

Малюнак 2: Тыл view of the sensor, illustrating the wiring terminals (L, N, L') and the LUX and TIME adjustment knobs. Mounting screws and wall anchors are also shown.

Інструкцыя па эксплуатацыі

The V-TAC VT-5087 sensor features two adjustable controls: LUX and TIME. These allow you to customize the sensor's behavior to suit your environment and preferences.

Ручкі рэгулявання

LUX Control: This knob adjusts the ambient light threshold at which the sensor will activate.
- Turn towards the СОНЦА symbol for activation in both daylight and darkness (e.g., >2000 LUX).
- Turn towards the МЕСЯЦ symbol for activation only in low light conditions (e.g., <3 LUX).
TIME Control: This knob sets the duration the light remains on after motion is detected and then stops.
- Adjust from minimum (approx. 10 seconds) to maximum (approx. 15 minutes).
- The timer resets if motion is detected again before the set time expires.

Close-up of the sensor's back showing LUX and TIME adjustment controls

Малюнак 3: Падрабязны view of the easy-access control knobs for LUX adjustment and TIME adjustment. This image also indicates the rated load for LED lighting (up to 1000W) and traditional lighting (up to 2000W).

Detection Range and Angle

The sensor offers a 360-degree detection angle, making it suitable for central ceiling placement. The maximum detection distance is approximately 6 meters (up to 8 meters at <24°C). The detection motion speed is 0.6-1.5 m/s.

Diagram illustrating the 360-degree detection range and distance of the motion sensor

Малюнак 4: Diagram showing the impressive detection features, including a 360-degree detection range, adjustable light intensity range (<3 to 2000 LUX), and a detection distance of 8 meters (up to 24°C). The time delay is adjustable from 10 seconds to 15 minutes.

Тэхнічнае абслугоўванне

The V-TAC VT-5087 PIR sensor requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

Уборка: Gently wipe the sensor lens and housing with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the unit.
Перашкоды: Periodically check that there are no new obstructions (e.g., furniture, decorations) blocking the sensor's field of view.
Магутнасць: Always disconnect power before performing any cleaning or inspection to prevent electric shock.

Ліквідацыю непаладак

If you experience issues with your V-TAC VT-5087 PIR sensor, refer to the following common problems and solutions:

праблема	Магчымая прычына	Рашэнне
Light does not turn on when motion is detected.	LUX setting is too low (set to MOON, but it's bright). Памылка праводкі. No power to the sensor. Датчык няспраўны.	Adjust LUX control towards the SUN symbol. Праверце злучэнні правадоў (пераканайцеся, што электраэнергія адключана). Verify power supply at the circuit breaker. Contact V-TAC support if other solutions fail.
Light stays on continuously or turns on randomly.	LUX setting is too high (set to SUN, but it's dark). Пастаянны рух у зоне выяўлення. Heat sources or air currents causing false triggers. TIME setting is too long.	Adjust LUX control towards the MOON symbol. Ensure no constant motion or obstructions. Relocate sensor away from heat sources or drafts. Adjust TIME control to a shorter duration.
Detection range is too short or inconsistent.	Obstructions blocking the sensor. Sensor mounted too high or in an unsuitable location. Ambient temperature is too close to body temperature.	Прыбярыце любыя перашкоды. Review mounting location; ensure it's within optimal range. PIR sensors are less effective when ambient temperature is similar to body temperature.

Тэхнічныя характарыстыкі

Асаблівасць	Спецыфікацыя
Нумар мадэлі	VT-5087
Марка	V-TAC
Колер	Чорны
Крыніца харчавання	Правадная электрычная
Частата	60 Гц
Тып мацавання	Потолочное мацаванне
Максімальны дыяпазон выяўлення	6 Meters (up to 8 meters at <24°C)
Кут выяўлення	360 градусаў
Рэгуляванне затрымкі часу	Min. 10s ± 3s / Max. 15min ± 2min
Light Intensity Range (LUX)	<3 да 2000 LUX (рэгуляваная)
Хуткасць выяўлення руху	0.6-1.5 м/с
Rated Load (LED)	Макс. 1000 Вт
Rated Load (Traditional Lighting)	Макс. 2000 Вт
Працоўная тэмпература	15 Degrees Celsius (Note: This seems like a minimum or specific test temperature, not a range.)
Рэйтынг IP	IP20

Інфармацыя аб гарантыі

This V-TAC VT-5087 PIR Infrared Motion Sensor comes with a Гарантыя 2 год from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

Product packaging for V-TAC Infrared Motion Sensor showing 2 years warranty

Малюнак 5: Product packaging for the V-TAC Infrared Motion Sensor, clearly indicating a 2-year warranty and other features like 360-degree detection, 6m distance, and IP20 rating.

Падтрымка кліентаў

For further assistance, technical support, or warranty inquiries, please contact V-TAC customer service. Refer to the V-TAC official webна сайце або на ўпакоўцы прадукту, каб атрымаць найноўшую кантактную інфармацыю.

V-TAC Webсайт: www.v-tac.eu

V-TAC 5087