JETBeam SF-R26
JETBeam SF-R26 Rechargeable Flashlight User Manual
Model: SF-R26 (9005721) | Brand: JETBeam
Уводзіны
The JETBeam SF-R26 is a high-performance, rechargeable LED flashlight designed for a wide range of lighting needs. Built with military-grade quality, it offers exceptional brightness and durability, making it suitable for various applications. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your SF-R26 flashlight.

Figure 1: JETBeam SF-R26 Rechargeable Flashlight, showcasinг яго кампактная і трывалая канструкцыя.
Інфармацыя па бяспецы
- Бяспека вачэй: Do not shine the flashlight directly into eyes. The powerful beam can cause temporary vision impairment or permanent eye damage.
- Цяпло: The flashlight may become warm during prolonged use, especially on higher output modes. Handle with care.
- Бяспека акумулятара:
- Use only recommended battery types (1x 18650 or 2x CR123A).
- Не змешвайце старыя і новыя батарэі або розныя тыпы батарэй.
- Пераканайцеся ў правільнай палярнасці батарэі падчас усталёўкі.
- Не выкідвайце батарэі ў агонь. Яны могуць выбухнуць.
- If the flashlight will not be used for an extended period, remove the batteries to prevent leakage.
- Воданепранікальнасць: While the SF-R26 is resistant to strong water jets, it is not designed for prolonged submersion. Ensure the USB port cover is securely closed when exposed to water.
- дзеці: Захоўваць у месцах, недаступных дзецям.
Змест пакета
Пасля адкрыцця ўпакоўкі пераканайцеся, што ў камплекце ёсць усе наступныя прадметы:
- JETBeam SF-R26 Flashlight
- Зарадны кабель Micro USB
- 18650 Rechargeable Battery (if included with specific package)
- Шнурок
- Запасныя ўшчыльняльныя кольцы
- Кіраўніцтва карыстальніка (гэты дакумент)

Figure 2: Contents typically included with the JETBeam SF-R26 flashlight, including the flashlight, battery, USB cable, and accessories.
Настройка
1. Устаноўка батарэі
The SF-R26 can be powered by one 18650 rechargeable Li-ion battery or two CR123A batteries. Ensure the battery is inserted with the positive (+) end facing towards the head of the flashlight.
- Адкруціце хваставую крышку ліхтарыка.
- Insert the battery(ies) according to the polarity markings. For 18650, the positive end goes towards the head. For CR123A, both positive ends go towards the head.
- Шчыльна закруціце заднюю крышку, каб забяспечыць належны кантакт і воданепранікальнасць.
2. Charging (for 18650 battery)
The SF-R26 features a convenient micro USB charging port for internal recharging of an 18650 battery. CR123A batteries are NOT rechargeable via the flashlight's USB port.
- Locate the micro USB charging port on the side of the flashlight. It is usually covered by a rubber flap.
- Gently lift the rubber flap to expose the port.
- Connect the micro USB cable to the flashlight's port and the other end to a USB power source (e.g., computer, wall adapter).
- The side switch LED indicator will show charging status (e.g., red for charging, green for fully charged).
- Once charging is complete, disconnect the cable and firmly press the rubber flap back into place to maintain water resistance.

Figure 3: The micro USB charging port on the side of the SF-R26, shown with a charging cable connected.
Інструкцыя па эксплуатацыі
1. Уключэнне/выключэнне харчавання (задні перамыкач)
The tactical tail cap switch controls the main power of the flashlight.
- На імгненне: Half-press the tail switch to momentarily turn on the light. Release to turn off.
- Пастаяннае ўключэнне/выключэнне: Fully press the tail switch until it clicks to turn the light on or off.

Figure 4: The tactical tail switch of the SF-R26, used for power control.
2. Выбар рэжыму (бакавы перамыкач)
With the flashlight turned on, use the side switch to cycle through different brightness levels and special modes.
- Узроўні яркасці: Short press the side switch to cycle through the available brightness modes (e.g., Low, Medium, High, Turbo). The SF-R26 offers 3 dimming outputs (10 lumens, 250 lumens) and a maximum output of 1200 lumens.
- Рэжым строб: Press and hold the side switch for approximately 1-2 seconds to activate the Strobe mode. Short press again to return to the previous brightness level.

Figure 5: The side switch of the SF-R26, used for cycling through brightness modes and activating strobe.
3. Індыкатар харчавання
The side switch also functions as an LED power indicator. It will flash slowly and then quickly to indicate when the battery charge is low and needs replacement or recharging.
Тэхнічнае абслугоўванне
- Уборка: Прачысціце корпус ліхтарыка мяккай губкайamp тканіна. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
- Разьба і ўшчыльняльныя кольцы: Periodically lubricate the threads and O-rings with silicone grease to maintain water resistance and smooth operation. Replace O-rings if they appear damaged or worn.
- Сыход за батарэяй:
- Захоўвайце батарэі ў прахалодным сухім месцы.
- If using rechargeable 18650 batteries, recharge them regularly, even if not fully depleted, to prolong battery life.
- Remove batteries from the flashlight if it will not be used for an extended period to prevent potential leakage and damage.
Ліквідацыю непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Ліхтарык не ўключаецца. |
|
|
| Святло цьмянае або мігціць. |
|
|
| Ліхтарык не зараджаецца. |
|
|
Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| мадэль | SF-R26 (9005721) |
| святлодыёд | CREE XP-L HI LED |
| Максімальны выхад | 1200 люмен |
| Узроўні яркасці | 10 Lumens, 250 Lumens, 1200 Lumens + Strobe |
| Peak Beam Distance | 373 метраў (1250 футы) |
| Пікавая інтэнсіўнасць прамяня | 34796 кд |
| Крыніца харчавання | 1 x 18650 rechargeable Li-ion battery OR 2 x CR123A batteries |
| Зарадка | Micro USB (for 18650 only) |
| Матэрыял | Aerospace-grade aluminum alloy with military-grade Type III hard-anodized finish |
| Памеры | 14.2 х 2.54 х 3.4 см (5.59 х 1.0 х 1.34 цалі) |
| Вага | 108.86 грам (3.84 унцыі) |
| Колер | Чорны |
| Воданепранікальнасць | Resistant to strong water jets (USB port cover must be closed) |

Малюнак 6: Буйны план view of the CREE XP-L HI LED emitter, highlighting the light source.
Гарантыя і падтрымка
JETBeam products are manufactured to high quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official JETBeam website. If you encounter any issues or require technical assistance, please contact JETBeam customer support or your authorized dealer.
вытворца: Sportsman Supply Inc.
Дата першай даступнасці: 24 лютага 2017 г