1. Уводзіны
This manual provides instructions for the DryEasy Plus Wireless Bedwetting Alarm Receiver. This device functions as an additional receiver for the DryEasy Plus wireless bedwetting alarm system. It is designed to be placed in a separate location, such as a parent's room, to alert caregivers when the primary alarm is triggered. It is crucial to note that this receiver is only compatible with the DE300 Ver. 2 transmitter.
This image displays the back of the DE300 Ver. 2 Transmitter, which is compatible with the DryEasy Plus Wireless Bedwetting Alarm Receiver. It clearly indicates "M/N DE300 (Ver.2) Transmitter" and an "Attention: Only compatible with DE300 Ver. 2 transmitter" label, highlighting the necessary compatibility for this receiver.
2. Настройка
2.1 Харчаванне прымача
The DryEasy Plus Wireless Receiver can be powered in two ways:
- Выкарыстанне шчолачных батарэй АА: Insert two (2) AA alkaline batteries into the battery compartment. Ensure correct polarity. (Batteries are not included.)
- Using a USB Power Adapter: Connect the provided USB cord to the receiver and then to a compatible smartphone adapter. The adapter should have an output of 5Vdc and a current of 0.5A or above. (USB power adapter is not included.)
2.2 Pairing with Transmitter
This receiver must be paired with a DryEasy DE300 Ver. 2 transmitter to function correctly. Please refer to the DE300 Ver. 2 transmitter's instruction manual for detailed pairing procedures. Ensure the transmitter is powered on and within range of the receiver during the pairing process.
2.3 Размяшчэнне прымача
For optimal performance and caregiver awareness, place the receiver in a location where the alarm can be easily heard, such as the parent's room. Ensure it is within effective wireless range of the DE300 Ver. 2 transmitter.
3. Аперацыя
3.1 Выбар гуку
The receiver offers 6 distinct sounds to prevent the user from becoming accustomed to a single alarm tone. You can choose to:
- Select a single preferred sound.
- Set the receiver to play the 6 sounds in a random sequence.
Refer to the receiver's controls for specific instructions on how to cycle through and select sound options.
3.2 Рэгулятар гучнасці
The receiver features 4 levels of digital volume control, allowing adjustment to suit different environments and user preferences. The maximum loudness is 85 dB. Adjust the volume using the dedicated controls on the receiver.
3.3 Рэжымы працы
The DryEasy Plus Wireless Receiver supports three distinct operation modes:
- Толькі гук: The receiver will emit an audible alarm when triggered.
- Толькі вібрацыя: The receiver will vibrate silently when triggered, suitable for discreet alerts.
- Sound Plus Vibration: The receiver will both emit an audible alarm and vibrate when triggered, providing a comprehensive alert.
Select your desired mode using the mode selection button or switch on the receiver.
4. Тэхнічнае абслугоўванне
4.1 Замена батарэі
When the receiver's performance diminishes or the low battery indicator activates (if present), replace the two (2) AA alkaline batteries. Ensure the device is powered off before opening the battery compartment and observe correct polarity when inserting new batteries.
4.2 Ачыстка
To clean the receiver, gently wipe the exterior with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or immerse the device in water. Ensure the device is completely dry before use.
5. Выпраўленне непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Прыёмнік не ўключаецца. | Dead or incorrectly inserted batteries; USB power issue. | Replace batteries, ensuring correct polarity. Check USB cable and adapter connection; ensure adapter meets 5Vdc/0.5A specifications. |
| Receiver does not alarm when transmitter is triggered. | Not paired with transmitter; out of range; low battery; incorrect mode setting. | Ensure receiver is correctly paired with a DE300 Ver. 2 transmitter. Move receiver closer to the transmitter. Replace batteries. Check operation mode (sound/vibration). |
| Alarm sound is too low or too loud. | Налада гучнасці няправільная. | Adjust the digital volume control to your desired level. |
| Receiver vibrates but no sound (or vice versa). | Incorrect operation mode selected. | Verify the selected operation mode (Sound Only, Vibration Only, or Sound Plus Vibration). |
For issues related to the transmitter or sensor, please consult the DryEasy DE300 Ver. 2 transmitter's instruction manual.
6. Тэхнічныя характарыстыкі
- Тып прадукту: Wireless Bedwetting Alarm Receiver (Additional Unit)
- Сумяшчальнасць: Only with DryEasy DE300 Ver. 2 Transmitter
- Крыніца харчавання:
- 2 шчолачныя батарэйкі тыпу АА (не ўключаны)
- USB Power (5Vdc, 0.5A or above adapter, not included)
- Audible Noise Level: Up to 85 Decibels
- Рэгулятар гучнасці: 4 digital levels
- Рэжымы працы: Sound Only, Vibration Only, Sound Plus Vibration
- Параметры гуку: 6 distinct sounds, single or random play
- Памеры ўпакоўкі: Прыкладна 6.26 х 1.42 х 1.38 цалі
- Вага прадмета: Прыблізна 0.15 кілаграма (5.43 унцыі)
- вытворца: Marvelworks Ltd.
- Ідэнтыфікатар FCC: 2AKU6-DE300V2
- Дата першай даступнасці: 11 чэрвеня 2017 г