ELECOM M-HT1DRBK

ELECOM HUGE Wireless Trackball Mouse M-HT1DRBK User Manual

Model: M-HT1DRBK

1. Уводзіны

This manual provides instructions for the proper setup, operation, and maintenance of your ELECOM HUGE Wireless Trackball Mouse (Model: M-HT1DRBK). Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

2. Што ў скрынцы

  • ELECOM HUGE Wireless Trackball Mouse
  • USB-прыёмнік
  • Батарэя AA (x2)
  • Кіраўніцтва карыстальніка (гэты дакумент)

3. Настройка

3.1. Устаноўка батарэі

  1. Locate the battery compartment on the underside of the trackball mouse.
  2. Адкрыйце крышку батарэйнага адсека.
  3. Устаўце дзве батарэйкі тыпу АА, сачыце за правільнай палярнасцю (+/-).
  4. Надзейна зачыніце крышку батарэйнага адсека.

3.2. Падключэнне USB-прыёмніка

The USB receiver is stored within the trackball mouse for convenience during transport.

  1. Remove the USB receiver from its storage slot on the underside of the trackball mouse.
  2. Падключыце USB-прыёмнік да даступнага USB-порта на вашым камп'ютары (ПК або Mac).
  3. Turn on the trackball mouse using the power switch located on the underside. The mouse should be automatically recognized by your operating system.
Inserting USB receiver into the ELECOM HUGE Wireless Trackball Mouse

Малюнак 1: Inserting the USB receiver into the storage slot on the underside of the trackball mouse.

3.3. Усталёўка праграмнага забеспячэння (памочнік мышы)

For full customization of the 8 programmable buttons and advanced features, it is recommended to install the ELECOM Mouse Assistant software.

  1. Наведайце афіцыйны сайт ELECOM webсайт.
  2. Navigate to the 'Support' or 'Downloads' section and locate 'Mouse Assistant'.
  3. Спампуйце адпаведную версію для вашай аперацыйнай сістэмы (Windows або macOS).
  4. Выконвайце інструкцыі на экране, каб завяршыць усталёўку.
Праграмны інтэрфейс памочніка мышы ELECOM

Малюнак 2: Example of the ELECOM Mouse Assistant software interface for button customization.

4. Інструкцыя па эксплуатацыі

4.1. Basic Cursor Control

The ELECOM HUGE trackball is designed for index finger control, providing precise cursor movement. Use your index finger to roll the 52mm trackball to move the cursor on the screen.

Hand demonstrating index finger control on the ELECOM HUGE Trackball

Малюнак 3: Demonstrating index finger control for precise cursor movement.

4.2. Рэгуляванне DPI

The trackball features a DPI button to adjust cursor speed. You can switch between three DPI settings: 500 (LOW), 1000 (MID), and 1500 (HIGH) DPI. Press the DPI button to cycle through these settings and find your preferred cursor speed.

4.3. Праграмуемыя кнопкі

The trackball is equipped with 8 physical buttons, including the scroll wheel with tilt functionality. These buttons can be customized using the ELECOM Mouse Assistant software to perform various functions, such as application shortcuts, media controls, or custom macros.

Diagram showing the 8 programmable buttons on the ELECOM HUGE Trackball

Малюнак 4: Скончанаview of the 8 programmable buttons and their locations.

4.4. Ergonomic Design and Palm Rest

The trackball features an ergonomic angled design and a large, soft palm rest to support your hand and wrist in a natural position, promoting comfort during extended use.

ELECOM HUGE Trackball with soft rubber palm support

Малюнак 5: The soft rubber palm support integrated into the trackball design.

5. Тэхнічнае абслугоўванне

5.1. Trackball Cleaning

To maintain smooth operation, periodically clean the 52mm trackball and its ruby bearings. Dust and debris can accumulate and affect performance.

  1. Turn off the trackball mouse.
  2. Locate the ball removal hole on the underside of the device.
  3. Gently push the trackball out through this hole.
  4. Працярыце трэкбол мяккай тканінай без ворса.
  5. Ачысціце тры рубінавыя шарыкападшыпнікі і ўнутраную частку корпуса трэкбола ватовым тампонам або мяккай шчоткай, каб выдаліць пыл або смецце.
  6. Reinsert the trackball into the housing until it clicks into place.
Diagram showing the ruby bearings and trackball removal

Малюнак 6: Illustration of the smooth ruby bearings and the trackball removal process.

6. Выпраўленне непаладак

6.1. Cursor Not Moving or Erratic

  • Праверце батарэі: Ensure batteries are correctly installed and have sufficient charge. Replace if necessary. The trackball has a battery remaining light lamp.
  • Праверце USB-прыёмнік: Пераканайцеся, што USB-прыёмнік надзейна падключаны да спраўнага USB-порта. Паспрабуйце іншы USB-порт.
  • Чысты трэкбол: Refer to Section 5.1 for instructions on cleaning the trackball and bearings.
  • Перашкоды: Move the trackball closer to the USB receiver or away from other wireless devices that might cause interference.

6.2. Кнопкі не рэагуюць

  • Праверка праграмнага забеспячэння: If using custom button assignments, ensure the ELECOM Mouse Assistant software is running and configured correctly.
  • Рамонт прылады: In rare cases, re-pairing the device with the USB receiver might resolve the issue. Consult the ELECOM support webсайт для атрымання канкрэтных інструкцый.

7. Тэхнічныя характарыстыкі

Нумар мадэліM-HT1DRBK
Сувязь2.4GHz Wireless USB
Налады DPI500 / 1000 / 1500 DPI (пераключальнае)
Гузікі8 (Programmable) + Scroll Wheel with Tilt
Памер трэкбола52 мм
Крыніца харчавання2 батарэйкі АА (уключаны)
Сумяшчальнасць аперацыйнай сістэмыWindows 7, 8, 10 or later; macOS 10.13 or later
Памеры (ДхШхВ)7.16 х 4.52 х 2.25 цалі (181.9 х 114.7 х 57.2 мм)
Вага (без батарэі)9.2 унцый (260 г)

8. Гарантыя і падтрымка

ELECOM products are designed for reliability and performance. For warranty information, technical support, or to download the latest software and drivers, please visit the official ELECOM website or contact ELECOM customer service.

Афіцыйны ELECOM Webсайт: https://www.elecom.co.jp/global/

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.