1. Уводзіны
The eSynic ZT102 is a 6000-count auto-ranging digital multimeter designed for accurate electrical measurements. It utilizes a double-integral style A/D transform as its core, providing stable and reliable performance with overload protection and a clear LCD display. This device is suitable for use in laboratories, factories, and for general household electrical troubleshooting.
2. Інфармацыя па бяспецы
Always observe basic safety precautions when using this multimeter to prevent electric shock, injury, or damage to the meter or equipment under test. Read and understand all safety information before operation.
- Не перавышайце максімальныя ўваходныя значэнні для любой функцыі.
- Будзьце асцярожныя пры працы з voltagвышэй за 30 В пераменнага току (RMS), 42 В пікавага або 60 В пастаяннага току. Гэтыя аб'ёмыtagуяўляюць небяспеку паражэння.
- Ensure the test leads are in good condition and properly seated in the input terminals.
- Do not operate the meter if it appears damaged or if the battery cover is not properly closed.
- Remove test leads from the circuit before changing functions.
- Замяняйце батарэйкі, калі з'явіцца індыкатар нізкага зарада батарэй, каб забяспечыць дакладныя паказанні.
- Заўсёды адключайце харчаванне ад ланцуга і разраджайце ўсе высокавольтныяtage кандэнсатараў перад праверкай супраціву, бесперапыннасці, дыёдаў або ёмістасці.
3. Змесціва ўпакоўкі
Праверце наяўнасць усіх прадметаў у камплекце:
- 1 x ZT102 Digital Multimeter
- 1 x Pair of Test Probes (Red and Black)
- 1 х тэмпературны зонд
- 1 х сумка для захоўвання
- 2 батарэйкі 1.5 В ААА
- 1 х Кіраўніцтва карыстальніка
4. Асаблівасці прадукту
- 6000 Counts True RMS: Забяспечвае дакладныя паказанні для несінусаідальных формаў хвалі.
- Аўтаматычнае вызначэнне дыяпазону: Automatically selects the correct measurement range.
- Функцыі вымярэння: AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Diode, Continuity, Temperature, Frequency, and Duty Cycle.
- Абарона ад перагрузкі: Protection on all ranges, including restorable fuse protection and short-circuit protection.
- ВК -дысплей з падсветкай: Large digits for clear visibility in various lighting conditions.
- Утрыманне дадзеных: Freezes the displayed reading for easy recording.
- Sampстаўка: 3 times per second for quick measurements.
- Нізкі абtage Індыкацыя: Папярэджвае, калі зарад батарэі нізкі.
- Аўтаматычнае выключэнне: Аўтаматычна адключаецца пасля пэўнага перыяду бяздзейнасці, што дазваляе эканоміць час працы батарэі.
- Кампактны дызайн: Product size of 130 x 65 x 30 mm and net weight of 190g for portability.
5. Схема прадукту
- Святлодыёдны экран: Displays measurement readings and indicators.
- HOLD/Backlit Button: Press to hold the current reading; long press to activate/deactivate backlight.
- Кнопка ВЫБАР: Toggles between different functions within a rotary switch position (e.g., AC/DC voltagе., дыёд/бесперапыннасць цеплаправоднасці).
- Паваротны пераключальнік: Выбірае асноўную функцыю вымярэння.
- 10A Input Terminal: Для вымярэння току да 10А.
- Уваходны тэрмінал COM: Агульны (адмоўны) вывад для ўсіх вымярэнняў.
- VΩHz-||-+ Input Terminal: Для вымярэння абtage, resistance, frequency, capacitance, diode, and temperature.
6. Настройка
6.1 Устаноўка батарэі
- Пераканайцеся, што мультыметр выключаны, і ўсе вымяральныя правады адключаны.
- Знайдзіце батарэйны адсек на задняй панэлі глюкометра.
- Выкарыстоўвайце адвёртку, каб адкрыць вечка батарэйнага адсека.
- Insert two 1.5V AAA batteries, observing the correct polarity (+ and -).
- Замяніце крышку батарэйнага адсека і замацуеце яе шрубай.
6.2 Падключэнне вымяральных зондаў
Заўсёды падключайце чорны вымяральны шнур да COM terminal. Connect the red test lead to the appropriate input terminal based on the measurement function:
- Для тtage, Resistance, Capacitance, Diode, Continuity, Frequency, and Temperature measurements, connect the red lead to the VΩHz-||-+ тэрмінал.
- For Current measurements (mA/A), connect the red lead to the 10А terminal for high current or the mA terminal for low current (if available, this model uses 10A for both).
7. Інструкцыя па эксплуатацыі
7.1 Агульныя дзеянні
- Павярніце паваротны перамыкач у становішча «патрэбная функцыя вымярэння».
- If multiple functions are available at one switch position (e.g., AC/DC Voltagд), націсніце кнопку ВЫБРАЦЬ кнопка для пераключэння паміж імі.
- Падключыце вымяральныя шнуры да ланцуга або кампанента, які правяраецца.
- Прачытайце значэнне вымярэння на ВК-экране.
- To hold a reading, press the ТРЫМАЦЬ button. Press again to release.
- To activate the backlight, long press the ТРЫМАЦЬ button. Long press again to turn off.
- When finished, turn the rotary switch to the OFF position.
7.2 Specific Measurement Modes
7.2.1 томtagВымярэнне (пераменны/пастаянны ток)
- Усталюйце паваротны перамыкач у становішча ~V (AC Томtagд) або V (DC Voltage). The meter will auto-range.
- Падключыце чырвоны выпрабавальны провад да VΩHz-||-+ terminal and the black lead to the COM тэрмінал.
- Place the test probes across the component or circuit points where voltage падлягае вымярэнню.
7.2.2 Вымярэнне супраціўлення
- Усталюйце паваротны перамыкач у становішча Ω.
- Падключыце чырвоны выпрабавальны провад да VΩHz-||-+ terminal and the black lead to the COM тэрмінал.
- Перад вымярэннем супраціўлення пераканайцеся, што ланцуг абясточаны.
- Place the test probes across the component to measure its resistance.
7.2.3 Тэст бесперапыннасці
- Усталюйце паваротны перамыкач у становішча Ω. Прэса ВЫБРАЦЬ пакуль сімвал бесперапыннасці ()))) з'яўляецца.
- Падключыце чырвоны выпрабавальны провад да VΩHz-||-+ terminal and the black lead to the COM тэрмінал.
- Пераканайцеся, што ланцуг абясточаны.
- Place the test probes across the points to be tested. If continuity exists (resistance below approximately 50Ω), the buzzer will sound.
7.2.4 Вымярэнне току (пераменны/пастаянны)
- Усталюйце паваротны перамыкач у становішча ~A (пераменны ток) або A (DC Current).
- Падключыце чырвоны выпрабавальны провад да 10А terminal and the black lead to the COM тэрмінал.
- Важна: To measure current, the meter must be connected in series with the circuit. Disconnect power to the circuit, open the circuit, and insert the meter in series.
- Apply power to the circuit and read the current.
7.2.5 Вымярэнне тэмпературы
- Усталюйце паваротны перамыкач у становішча ° C / ° F.
- Падключыце тэмпературны датчык да VΩHz-||-+ і COM terminals, observing polarity.
- Place the tip of the temperature probe on or in the object whose temperature is to be measured.
- Read the temperature on the display. Press ВЫБРАЦЬ для пераключэння паміж градусамі Цэльсія і Фарэнгейта.
7.2.6 Capacitance, Diode, and Frequency/Duty Cycle
- For Capacitance, Diode, and Frequency/Duty Cycle, set the rotary switch to the corresponding position and use the ВЫБРАЦЬ button to cycle through the functions.
- Падключыце чырвоны выпрабавальны провад да VΩHz-||-+ terminal and the black lead to the COM тэрмінал.
- For capacitance and diode tests, ensure the component is de-energized and discharged before testing.
8. Тэхнічнае абслугоўванне
8.1 Ачыстка
Працярыце лічыльнік рэкламайamp тканінай і мяккім мыйным сродкам. Не выкарыстоўвайце абразіўныя рэчывы або растваральнікі. Трымайце клемы чысцінёй ад бруду і вільгаці.
8.2 Замена батарэі
When the low battery indicator appears on the display, replace the batteries as described in Section 6.1. Using the meter with low batteries may result in inaccurate readings.
8.3 Замена засцерагальніка
If the current measurement function stops working, the fuse may need replacement. Refer to the safety warnings on the back of the meter for fuse specifications. Only replace with a fuse of the same type and rating.
WARNING: To avoid electrical shock, remove test leads before replacing battery or opening case.
9. Выпраўленне непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Няма дысплея або дысплей цьмяны | Батарэі разрадзіліся або разрадзіліся | Замяніце батарэйкі (раздзел 6.1) |
| Няправільныя паказанні | Low batteries, incorrect function selected, poor lead connection | Replace batteries, select correct function, ensure leads are properly connected |
| Вымярэнне току не працуе | Перагарэў засцерагальнік | Заменіце засцерагальнік (гл. раздзел 8.3) |
| Адлюстравана "OL" (перагрузка) | Input value exceeds selected range or meter's maximum capacity | Select a higher range (if not auto-ranging) or verify the circuit's value is within meter limits. |
10. Тэхнічныя характарыстыкі
| Вымярэнне | Дыяпазон | Дакладнасць |
|---|---|---|
| DC Voltage | 60mV/6V/60V/600V/1000V | ±(0.5%+3) |
| Пераменнага токуtage | 60mV/6V/60V/600V/750V | ±(1%+3) |
| Пастаянны/пераменны ток | 60 мА/600 мА/6 А/10 А | ±(1.5%+3) |
| Супраціў | 600Ω/6KΩ/60KΩ/600KΩ/6MΩ/60MΩ | ±(0.5%+3) for most, ±(1.5%+3) for 60MΩ |
| Ёмістасць | 10nF/100nF/1uF/10uF/100uF/1000uF/10000uF | ±(2.0%+5) for most, ±(5.0%+5) for 1000uF/10000uF |
| тэмпература | -20℃ да 1000℃ / -4℉ да 1832℉ | ±(2.5%+5) |
| Частата | 5/50/500/5k/50k/500k/5M/10M Hz | ±(0.1%+3) |
| Працоўны цыкл | ад 1% да 99% | ±(1%) |
Агульныя характарыстыкі:
- Дысплей: 6000 графаў
- Метад вымярэння: Double integral A/D converter
- Auto Range & True RMS: так
- Дыёдны тэст: так
- Out of Range Display: OL
- Індыкацыя разраду батарэі: так
- Аўтаматычнае выключэнне: так
- Абарона ад кароткага замыкання: так
- Працоўнае асяроддзе: 0~40°C, relative humidity <80%
- Крыніца харчавання: 2 батарэйкі 1.5 В ААА
- Памер прадукту: 130 х 65 х 30 мм
- Вага нета прадукту: 190 г
11. Гарантыя
All eSynic products come with an 18-month warranty from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by misuse, unauthorized modification, accident, or neglect.
12. Падтрымка
For technical assistance, warranty claims, or further inquiries, please contact eSynic customer support through your purchase platform or the official eSynic website. Please have your model number (ZT102) and purchase details ready when contacting support.