Whirlpool W60106-35 Refrigerator Defrost Heater Instruction Manual

1. Уводзіны

This manual provides essential information for the safe and correct installation, operation, and maintenance of your Whirlpool WP60106-35 Refrigerator Defrost Heater. This genuine Original Equipment Manufacturer (OEM) part is designed to melt frost from the evaporator fins during the automatic defrost cycle of your refrigerator.

Please read these instructions thoroughly before beginning any work on your appliance.

2. Інфармацыя па бяспецы

ПАПЯРЭДЖАННЕ: Before attempting any repairs or installation, always disconnect the refrigerator from its power source to prevent electric shock or injury.

• Unplug the Refrigerator: Ensure the appliance is completely disconnected from the electrical outlet.
• Апранайце ахоўнае рыштунак: Always wear work gloves to protect your hands from sharp edges and potential hazards.
• Захоўванне харчовых прадуктаў: Safely store any food that could deteriorate while the power is off and the refrigerator is undergoing service.
• Прафесійная дапамога: Калі вы не ўпэўненыя ў якім-небудзь кроку, звярніцеся да кваліфікаванага спецыяліста па бытавой тэхніцы.
• Арыгінальныя запчасткі: Выкарыстоўвайце толькі арыгінальныя запчасткі ад вытворцаў арыгінальнага абсталявання, каб забяспечыць належную прыдатнасць і функцыянальнасць.

3. Сумяшчальнасць

The WP60106-35 defrost heater is compatible with various refrigerator models from the following brands:

• Адмірал
• маяtag
• Чароўны шэф-повар
• Крослі
• Джэн-Эйр
• Норвегія

This part is a manufacturer substitution and may differ in appearance from prior parts, but it is a functional equivalent to parts including 60106-35, 60106-14, 60106-2, 60106-20, 60106-26, and 60106-29.

Specific compatible models include, but are not limited to: AT19M8A, CDNT18V9A/CC48A, RB19KN-4A/BG64B, RB19KN-4A/BG64A, RB19EY-2AL/7C07B, RB19KY-2A/BG58C, RB19KY-2A/BG58B, CNT21V8A/BC74A, RB19KY-2A/BG58A, NNT219KA/BC80B, NNT219KA/BC80A, RB21FN-3A/8C73A, RB19KN-4A/BG64C, RTD1900AAL/CH59B, CNTI19V6/AC52A, NNT196DV/4C77A, RTD1900AAL/CH59A, RB184PDA/DG43A, CNT19T6A/8A16A, NNT218G/5E67A, GT17X8FA, NR580/AF56B, RB18KA-4BW/BG46A, NNT196J/8A29A, NT19HX/9D03A, RB18EY-3AWL/5B47B, RB19HA-1AL/8C69B, AT19M8V, AT21M8V/DA67A, RTC1900CAE/DH55B.

4. Інструкцыя па ўстаноўцы

The following steps outline the general procedure for replacing a refrigerator defrost heater. Specific steps may vary slightly depending on your refrigerator model. Always refer to your appliance's service manual for detailed instructions.

Неабходныя інструменты:

• Набор адвёртак (крыжовая і плоская)
• Набор гайковертов
• Працоўныя пальчаткі

Працэдура:

1. Адключыць харчаванне: Unplug the refrigerator from the electrical outlet. This is a critical safety step.
2. Empty Refrigerator/Freezer: Remove all food items from the freezer and refrigerator compartments. Store perishable items in a cooler.
3. Access Evaporator Cover: Locate and remove the screws holding the freezer's rear panel or evaporator cover in place. Carefully detach the cover, which may require disconnecting wire harnesses for fans or lights.
4. Locate Defrost Heater: The defrost heater is typically located at the bottom of the evaporator coil, often secured by clips or screws. It may appear as a glass tube or a metal rod.
5. Адключыце праводку: Carefully disconnect the electrical wires leading to the old defrost heater. Note their position for reinstallation.
6. Зняць стары абагравальнік: Unclip or unscrew the old defrost heater from its mounting brackets.
7. Усталяваць новы абагравальнік: Position the new Whirlpool WP60106-35 defrost heater in the same location as the old one. Secure it with the clips or screws.
8. Падключэнне правадоў: Reconnect the electrical wires to the new defrost heater, ensuring a secure connection.
9. Replace Evaporator Cover: Reattach the evaporator cover and any disconnected wire harnesses. Secure it with the screws.
10. Аднавіць сілу: Зноў падключыце халадзільнік да электрычнай разеткі.
11. Тэставая аперацыя: Monitor the refrigerator for proper cooling and defrost cycle operation over the next 24 hours.

Image 1: Whirlpool WP60106-35 Refrigerator Defrost Heater. This image shows the genuine OEM defrost heater, a critical component for preventing ice buildup on the evaporator coils.

5. Аперацыя

The defrost heater operates as part of your refrigerator's automatic defrost system. Periodically, the refrigerator's control board will initiate a defrost cycle. During this cycle:

• The compressor and evaporator fan temporarily shut off.
• The defrost heater activates, generating heat to melt any frost that has accumulated on the evaporator fins.
• Melted water drains through a defrost drain tube to a drain pan, where it evaporates.
• Once the evaporator coil reaches a specific temperature (monitored by a defrost thermostat or thermistor), the heater deactivates, and the normal cooling cycle resumes.

This process is essential for maintaining efficient cooling and preventing excessive ice buildup, which can restrict airflow and reduce cooling performance.

6. Тэхнічнае абслугоўванне

While the defrost heater itself requires no routine maintenance, ensuring the overall defrost system functions correctly is important for your refrigerator's longevity and efficiency:

• Keep Defrost Drain Clear: Periodically check and clear the defrost drain tube of any debris or ice to prevent water from backing up and freezing in the freezer compartment.
• Кантралюйце назапашванне лёду: If you notice excessive frost buildup on the freezer's rear panel or evaporator coils, it may indicate an issue with the defrost system, including the heater, defrost thermostat, or control board.
• Чыстка кандэнсатарных шпулек: Regularly clean the condenser coils (usually located at the back or bottom of the refrigerator) to ensure efficient operation of the entire cooling system.

7. Выпраўленне непаладак

If your refrigerator is experiencing issues related to defrosting, consider the following common problems and potential solutions:

• Excessive Frost Buildup in Freezer:
  • Магчымая прычына: Faulty defrost heater, defrost thermostat, or defrost timer/control board.
  • дзеянне: Inspect the defrost heater for continuity using a multimeter. If no continuity, replace the heater. Also, check the defrost thermostat and timer/control board.
• Refrigerator Not Cooling (Freezer is Fine):
  • Магчымая прычына: Excessive frost buildup on the evaporator coils (due to a defrost system failure) can block airflow to the refrigerator compartment.
  • дзеянне: Check the defrost heater and other defrost components. If the evaporator coils are completely iced over, manually defrost the refrigerator and then address the faulty defrost component.
• Water Leaking Inside Refrigerator/Freezer:
  • Магчымая прычына: Clogged defrost drain tube.
  • дзеянне: Clear the defrost drain tube. While not directly a heater issue, a functioning heater produces water that needs to drain properly.

Always ensure the refrigerator is unplugged before performing any diagnostic tests or repairs.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

For specific warranty information regarding your Whirlpool WP60106-35 Refrigerator Defrost Heater, please refer to the documentation provided with your original appliance or contact Whirlpool customer support directly. Genuine OEM parts typically carry a manufacturer's warranty against defects.

If you require further assistance with installation, troubleshooting, or have questions about your appliance, please contact a certified appliance technician or Whirlpool's official customer service channels.