MICRODOS MP2-B Dosing Device Instruction Manual

1. Прадукт скончыўсяview

The MICRODOS MP2-B is a peristaltic dosing pump designed for precise dispensing of cleaning agents in dishwashers. This model operates without an integrated control system, making it suitable for applications where external control is managed. It features a robust Santoprene hose for chemical resistance and reliable performance.

Малюнак 1: Фронт view of the MICRODOS MP2-B Dosing Device. The device is blue with a clear top cover revealing the peristaltic pump mechanism. It has black hose connections on the front and a power cable connection at the bottom.

Асноўныя характарыстыкі:

• Ужыванне: Specifically designed for dishwasher cleaning agent dispensing.
• Хуткасць патоку: Capable of dispensing at 1.5 liters per hour (1.5 l/h).
• Suction Height: Maximum suction height of 1.5 meters (1.5m).
• Злучэнне шланга: Equipped with a ø 4x6mm hose connection.
• Матэрыял шланга: Utilizes Santoprene for durability and chemical compatibility.
• кантроль: Operates without an integrated control system.
• крыніца харчавання: 230 В пераменнага току.

2. Інструкцыі па тэхніцы бяспекі

ПАПЯРЭДЖАННЕ: Installation and maintenance of this device must only be performed by qualified personnel. Failure to comply may result in electric shock, equipment damage, or personal injury.

• Заўсёды адключайце харчаванне перад устаноўкай, абслугоўваннем або ліквідацыяй няспраўнасцей.
• Пераканайцеся, што ўсе электрычныя падключэнні адпавядаюць мясцовым нормам і правілам.
• Wear appropriate personal protective equipment (PPE) when handling cleaning agents.
• Не выкарыстоўвайце прыладу, калі яна пашкоджана або працуе няспраўна.
• Keep the device away from excessive heat, moisture, and corrosive environments.

3. Настройка і ўстаноўка

This section provides general guidelines for setting up the MICRODOS MP2-B dosing device. Specific installation details may vary based on your dishwasher system and local regulations. Always refer to the dishwasher manufacturer's instructions and consult with qualified personnel.

3.1 Мантаж прылады

• Choose a secure, dry location near the dishwasher, ensuring easy access for maintenance.
• Mount the device vertically using appropriate fasteners, ensuring it is level.
• Allow sufficient space around the device for ventilation and hose routing.

3.2 Падлучэнне шлангаў

• Connect the suction hose (ø 4x6mm) from the cleaning agent container to the inlet port of the dosing device. Ensure the hose reaches the bottom of the container to prevent air intake.
• Connect the discharge hose (ø 4x6mm) from the outlet port of the dosing device to the designated cleaning agent inlet on your dishwasher.
• Secure all hose connections with appropriate clamps для прадухілення ўцечак.

3.3 Электрычнае падключэнне

• Ensure the power supply is disconnected before making electrical connections.
• Connect the device to a 230VAC power source. This model operates without integrated control, so it must be connected to an external control system (e.g., dishwasher's dosing signal) to initiate dispensing.
• Пераканайцеся, што ўсе электрычныя злучэнні надзейныя і належным чынам ізаляваныя.

4. Аперацыя

The MICRODOS MP2-B dosing device is designed for automatic operation when integrated with a compatible dishwasher control system. It does not have manual controls for dosing adjustments on the unit itself.

4.1 Першапачатковы запуск

• After completing all installation steps and verifying connections, ensure the cleaning agent container has sufficient liquid.
• Restore power to the device and the dishwasher system.
• Initiate a dishwasher cycle that triggers the dosing signal. The MP2-B should begin drawing and dispensing the cleaning agent.
• Observe the flow to ensure proper operation and check for any leaks.

4.2 Dosing Adjustment

Dosing quantity and frequency are typically controlled by the external dishwasher system or a separate dosing controller. Refer to your dishwasher's or external controller's manual for instructions on adjusting cleaning agent dosage.

5. Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and optimal performance of your MICRODOS MP2-B dosing device. Always disconnect power before performing any maintenance.

5.1 Рэгулярныя праверкі

• Шлангі: Periodically inspect the suction and discharge hoses for kinks, cracks, or signs of wear. Replace damaged hoses immediately.
• Сувязі: Check all hose and electrical connections for tightness and integrity.
• Cleaning Agent Level: Ensure the cleaning agent container has sufficient liquid to prevent the pump from running dry.
• Напор помпы: Inspect the peristaltic pump head for any visible wear or residue buildup.

5.2 Peristaltic Tube Replacement

The Santoprene peristaltic tube is a wear part and will require periodic replacement depending on usage and the type of cleaning agent. Consult a qualified technician for tube replacement to ensure proper installation and calibration.

6. Выпраўленне непаладак

This section provides basic troubleshooting steps for common issues. For more complex problems, contact qualified service personnel.

7. Тэхнічныя характарыстыкі

8. Гарантыя і падтрымка

For warranty information and technical support, please contact your MICRODOS product supplier or authorized service center. Keep your purchase receipt and product model number (MP2-B) readily available when seeking support.

This manual is intended for informational purposes only. MICRODOS reserves the right to make changes to product specifications without prior notice.