FISCHER Bicycle Pedals Instruction Manual

1. Прадукт скончыўсяview

The FISCHER Pedale MTB Kunststoff are durable plastic pedals designed for various bicycle types, particularly mountain bikes. They feature a non-slip design for enhanced grip and integrated reflectors for improved visibility and safety, complying with German Road Traffic Licensing Regulations.

Асноўныя характарыстыкі:

• Suitable for all bicycle types.
• Non-slip and non-slip special design for secure foot placement.
• Equipped with reflectors for increased visibility.
• Approved by German Road Traffic Licensing Regulations (StVZO).
• Lightweight plastic construction.

2. Настройка і ўстаноўка

Proper installation of your new pedals is crucial for safety and performance. Please follow these steps carefully.

Неабходны інструмент:

• Pedal wrench (recommended item 85526) or a 15mm open-end wrench.

Этапы ўстаноўкі:

1. Identify Left and Right Pedals: Pedals are typically marked with 'L' for left and 'R' for right. The right pedal (drive side) has a standard thread, while the left pedal has a reverse thread. This means the left pedal tightens counter-clockwise and loosens clockwise.
2. Падрыхтуйце шатуны: Ensure the threads on your bicycle's crank arms are clean and free of debris. Applying a small amount of bicycle grease to the pedal threads can prevent seizing and make future removal easier.
3. Install Right Pedal: Insert the 'R' pedal into the right crank arm. Turn clockwise by hand to start threading. Once finger-tight, use your pedal wrench to firmly tighten the pedal. Do not overtighten, but ensure it is secure to prevent loosening during use.
4. Install Left Pedal: Insert the 'L' pedal into the left crank arm. Turn counter-clockwise by hand to start threading (reverse thread). Once finger-tight, use your pedal wrench to firmly tighten the pedal.
5. Канчатковая праверка: After installation, ensure both pedals spin freely and are securely attached to the crank arms.

Figure 2.1: FISCHER Pedale MTB Kunststoff, showing the non-slip surface and integrated reflectors.

3. Кіраўніцтва па эксплуатацыі

These pedals are designed for general cycling use, offering a stable and secure platform for your feet.

• Размяшчэнне ступні: Position your foot so the ball of your foot is over the pedal spindle for optimal power transfer and comfort.
• Дызайн супраць слізгацення: The textured surface and molded pins provide excellent grip, even in wet conditions.
• Адбівальнікі: The integrated reflectors enhance your visibility to others, especially in low-light conditions. Ensure they are clean and unobstructed.
• Рэгулярныя праверкі: Periodically check that the pedals are still securely tightened to the crank arms before each ride.

4. Тэхнічнае абслугоўванне

Regular maintenance will prolong the life and performance of your pedals.

• Уборка: Clean the pedals with a damp cloth and mild soap. Avoid harsh chemicals that could damage the plastic.
• агляд: Regularly inspect the pedal body for cracks or damage. Check the reflectors for cleanliness and ensure they are not broken.
• Spindle Check: Listen for any unusual noises (e.g., squeaking, grinding) from the pedal spindle, which might indicate worn bearings. While these pedals are not designed for user-serviceable bearings, excessive play or noise may indicate a need for replacement.
• Герметычнасць: Re-check the tightness of the pedals on the crank arms periodically, especially after the first few rides.

5. Выпраўленне непаладак

Вось некаторыя распаўсюджаныя праблемы і іх магчымыя рашэнні:

6. Тэхнічныя характарыстыкі

7. Гарантыя і падтрымка

Каб атрымаць інфармацыю аб гарантыі або тэхнічнай падтрымцы, звярніцеся да прадаўца або афіцыйнага прадстаўніка вытворцы webсайт. Захоўвайце пацвярджэнне пакупкі для любых гарантыйных прэтэнзій.

Manufacturer: FISCHER