1. Уводзіны
This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of your Torin T83505W BlackJack Hydraulic Low Profile Steel Racing Floor Jack. This jack is designed for general or specialty use, featuring a 3-ton (6,000 lb) capacity and a single piston quick lift pump for efficient lifting.
Please read this manual thoroughly before using the product to ensure proper function and safety. Keep this manual for future reference.

Figure 1: Torin T83505W BlackJack Hydraulic Low Profile Steel Racing Floor Jack, showing its low-profile design and handle.
2. Важная інфармацыя па бяспецы
ПАПЯРЭДЖАННЕ: Failure to follow these instructions may result in property damage, personal injury, or death.
- Always read and understand the entire manual before operating the jack.
- Гэты дамкрат з'яўляецца толькі пад'ёмнай прыладай. Immediately after lifting, support the vehicle with appropriate jack stands. Do not work under a vehicle supported only by a jack.
- Не перавышайце намінальную грузападымальнасць 3 тоны (6,000 фунтаў).
- Use only on a hard, level surface. Avoid using on asphalt or soft ground.
- Цэнтруйце груз на сядле. Нецэнтраваны груз можа прывесці да перакульвання дамкрата.
- Ensure the vehicle's parking brake is engaged and wheels are chocked before lifting.
- Не выкарыстоўвайце дамкрат для іншых мэтаў, акрамя ўзняцця транспартных сродкаў.
- Keep hands and feet clear of moving parts and the area under the vehicle.
- Апускайце груз павольна і асцярожна.
- Карыстайцеся адпаведнымі сродкамі бяспекі, у тым ліку ахоўнымі акулярамі.
- Inspect the jack before each use for damage, leaks, or loose parts. Do not use if damaged.
3. Што ў скрынцы
Пасля распакавання пераканайцеся, што ўсе кампаненты наяўныя і не пашкоджаныя:
- Floor jack unit
- 2-piece handle
- Інструкцыя па эксплуатацыі (гэты дакумент)
4. Усталёўка і пачатковая падрыхтоўка
Перад першым выкарыстаннем або пасля працяглага захоўвання падрыхтуйце дамкрат наступным чынам:
- Збярыце ручку:
Connect the two pieces of the handle together. Insert the assembled handle into the handle socket on the jack. Ensure it is fully seated.

Малюнак 2: Буйны план view of the handle connection point on the jack.
- Bleed the Hydraulic System (if necessary):
Air can become trapped in the hydraulic system during shipping or storage, affecting performance. To bleed the system:
- Turn the handle counter-clockwise to open the release valve.
- Хутка прапампуйце ручку 10-15 разоў без нагрузкі.
- Павярніце ручку па гадзіннікавай стрэлцы, каб зачыніць выпускны клапан.
- Праверце дамкрат, падняўшы яго на поўную вышыню, а затым апусціўшы. Пры неабходнасці паўтарыце.
5. Інструкцыя па эксплуатацыі
5.1. Пад'ём транспартнага сродку
- Падрыхтуйце аўтамабіль: Park the vehicle on a hard, level surface. Engage the parking brake and chock the wheels that will remain on the ground.
- Размясціце валет: Locate the vehicle manufacturer's recommended lifting points. Position the jack so the saddle is directly under the lifting point. Ensure the jack is on a stable surface.
- Падняць транспартны сродак:
- Turn the handle clockwise until the release valve is fully closed.
- Pump the handle up and down to raise the saddle. Continue pumping until the vehicle reaches the desired height.
- Ensure the vehicle is stable on the jack saddle during lifting.

Figure 3: Illustration of the jack's lifting range (3.7" min to 18.1" max) and basic operating steps.
- Замацуйце з дапамогай падстаўак: Once the vehicle is lifted, immediately place appropriately rated jack stands under the vehicle's frame or designated support points. Lower the vehicle slowly onto the jack stands.
- Зняць дамкрат: Once the vehicle is securely supported by jack stands, turn the handle counter-clockwise slightly to release the pressure and lower the jack completely. Remove the jack from under the vehicle.
5.2. Апусканне транспартнага сродку
- Reposition the Jack: If the jack was removed, place it back under the vehicle's lifting point, ensuring the saddle is centered.
- Злёгку падняць: Pump the jack handle a few times to lift the vehicle slightly off the jack stands.
- Зняць падстаўкі для Джэка: Асцярожна выміце дамкраты з-пад аўтамабіля.
- Апусціце транспартны сродак: Slowly turn the handle counter-clockwise to open the release valve. The vehicle will begin to lower. Control the lowering speed by adjusting how much you open the valve.
- Зняць дамкрат: Once the vehicle is fully on the ground, remove the jack.
6. Тэхнічнае абслугоўванне
Рэгулярнае тэхнічнае абслугоўванне забяспечвае даўгавечнасць і бяспечную працу вашага гідраўлічнага дамкрата.
- змазка: Periodically lubricate all moving parts, including the pivot points, wheels, and handle mechanism, with light machine oil.
- Гідраўлічная вадкасць: Check the hydraulic fluid level every three months. To check, lower the jack completely, remove the oil filler plug, and ensure the fluid is level with the bottom of the filler hole. Use only high-quality hydraulic jack oil. Do not use brake fluid or motor oil.
- Уборка: Трымайце дамкрат чыстым і без бруду, тлушчу і агрэсіўных матэрыялаў.
- захоўванне: Захоўвайце дамкрат у сухім, абароненым месцы з цалкам уцягнутым плашкай, каб прадухіліць карозію і падоўжыць тэрмін службы ўшчыльняльніка.
- агляд: Before each use, inspect the jack for any signs of damage, wear, or leaks. Pay close attention to welds, casters, and the hydraulic cylinder.
7. Выпраўленне непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Дамкрат не падымае груз. |
|
|
| Джэк падымае павольна або няўстойліва. |
|
|
| Jack lowers too fast. |
|
|
| Джэк не апусціцца цалкам. |
|
|
8. Тэхнічныя характарыстыкі

Малюнак 4: Падрабязныя памеры вырабу і асноўныя характарыстыкі.
| Асаблівасць | Дэталь |
|---|---|
| Нумар мадэлі | T83505W |
| Марка | Торын |
| Грузападымальнасць | 3 тоны (6,000 фунтаў) |
| Мінімальная вышыня ўздыму | 3.7 цаляў |
| Максімальная вышыня ўздыму | 18.1 цаляў |
| Памеры прадукту (Д х Ш х У) | 25.2 х 13.5 х 6.9 цалі |
| Вага прадмета | 71.8 фунта |
| Тып помпы | Single Piston Quick Lift |
| Матэрыял | Высокатрывалая сталь |
9. Гарантыя і падтрымка
For warranty information, technical support, or to inquire about replacement parts, please contact Torin customer service directly. Refer to the product packaging or the official Torin webсайт для атрымання найбольш актуальнай кантактнай інфармацыі.
Інтэрнэт-рэсурсы: For additional information and support, you may visit the official Torin webсайт: Torin Store on Amazon.