Кіраўніцтва карыстальніка сістэмы сігналізацыі Digoo DG-HOSA Smart Home Security

1. Прадукт скончыўсяview

The Digoo DG-HOSA Smart Home Security Alarm System is a comprehensive security solution designed to protect your home. This system supports Wi-Fi, GSM, 2G, and 3G networks, offering flexible connectivity options. It features an intuitive control panel with a keypad and display, along with various wireless sensors for motion detection and door/window monitoring. The system can be controlled remotely via the "Easy security" mobile application, providing real-time alerts and management capabilities.

Figure 1.1: Complete Digoo DG-HOSA Smart Home Security Alarm System kit, including the main control panel, PIR motion detector, door/window sensors, and remote controllers.

2. Што ў скрынцы

Пасля адкрыцця ўпакоўкі пераканайцеся, што ўсе наступныя кампаненты ў камплекце:

• 1 x Digoo DG-HOSA Home Security Alarm Host (Main Control Panel)
• 1 x Wireless PIR Detector (Passive Infrared Motion Sensor)
• 2 х Пульты дыстанцыйнага кіравання
• 2 датчыкаў дзвярэй/вокнаў
• 4 x Assist Installation Screws
• 4 x Wall-in Fixed Rubber Blocks
• 1 x 1M USB Power Cable (for 5V power supply)

Figure 2.1: Main control panel shown with a PIR motion detector, a door/window sensor, and a remote controller, representing key components of the system.

3. Кіраўніцтва па наладцы

3.1 Пачатковае ўключэнне і падключэнне да сеткі

1. Падключыце харчаванне: Use the provided USB power cable to connect the alarm host to a 5V power source.
2. Усталёўка SIM-карты (неабавязкова): If using GSM/3G network, insert a compatible SIM card into the designated slot on the side of the control panel.
3. Канфігурацыя Wi-Fi:
   • Download the "Easy security" app from your smartphone's app store.
   • Ensure your smartphone and the alarm host are connected to the same Wi-Fi network during the initial setup.
   • Follow the in-app instructions to pair the alarm host with your Wi-Fi network.

Малюнак 3.1: бок view of the Digoo DG-HOSA control panel, highlighting the USB power port, SIM card slot, and reset button for initial setup and connectivity.

3.2 Усталёўка і спалучэнне датчыкаў

The system supports up to 99 sensors. Each sensor needs to be installed and paired with the main control panel.

1. PIR-датчык руху:
   • Install the PIR detector in a corner or on a wall where it can cover the desired area, avoiding direct sunlight or heat sources.
   • Ensure the detector is at an appropriate height (typically 2-2.2 meters) for optimal coverage.
   • Pair the detector with the alarm host via the "Easy security" app or directly through the control panel's menu.
2. Датчыкі дзвярэй/вокан:
   • Mount the two parts of the door/window sensor (magnet and main unit) on the door/window frame and the moving part, ensuring they are aligned and within 1 cm of each other when closed.
   • Pair the sensors with the alarm host using the same method as the PIR detector.
3. Пульты дыстанцыйнага кіравання:
   • The remote controllers are typically pre-paired. If not, follow the pairing instructions in the app or manual.

Figure 3.2: Individual components: Wireless PIR Motion Detector (left) and Wireless Door/Window Sensor (right), essential for comprehensive home security coverage.

4. Інструкцыя па эксплуатацыі

4.1 З дапамогай панэлі кіравання

The main control panel features a touchscreen display and a numeric keypad for direct interaction.

• Пастаноўка на ахову: Press the "ARM" button or enter your passcode followed by "ARM" to activate the alarm system.
• Зняцце з аховы: Press the "DISARM" button or enter your passcode followed by "DISARM" to deactivate the alarm system.
• Функцыя SOS: In an emergency, press the "SOS" button on the panel or remote controller to trigger an immediate alarm and send alerts to pre-programmed contacts.
• Налады: Navigate through the menu using the touchscreen to adjust system settings, add/remove sensors, set up alarm zones, and configure network preferences.

Малюнак 4.1: Спераду view of the Digoo DG-HOSA control panel, displaying the touchscreen interface, numeric keypad, and function buttons for system control.

4.2 Mobile App Control ("Easy security")

The "Easy security" app provides full remote control and monitoring capabilities for your alarm system.

• Дыстанцыйная пастаноўка/зняцце з аховы: Activate or deactivate the system from anywhere with an internet connection.
• Апавяшчэнні ў рэжыме рэальнага часу: Receive instant push notifications for alarm events, low battery alerts, and system status changes.
• Кіраванне датчыкамі: Add, remove, or configure individual sensors and their respective defense zones.
• Call and Message Settings: Set up emergency contacts to receive calls and SMS alerts during an alarm.
• Стан сістэмы: View бягучы стан вашай сігналізацыі і падлучаных датчыкаў.

5. Тэхнічнае абслугоўванне

• Замена батарэі: Replace batteries in wireless sensors and remote controllers as indicated by low battery alerts on the control panel or app.
• Уборка: Gently wipe the control panel and sensors with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Абнаўленні прашыўкі: Periodically check for firmware updates via the "Easy security" app to ensure optimal performance and security.
• Стабільнасць сеткі: Ensure a stable Wi-Fi and cellular network connection for reliable operation and remote access.

6. Выпраўленне непаладак

7. Тэхнічныя характарыстыкі

8. Гарантыя і падтрымка

For warranty information and technical support, please refer to the official DIGOO webсайт або звярніцеся ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі як пацвярджэнне пакупкі для прэтэнзій па гарантыі.

Інтэрнэт-рэсурсы:

• Official DIGOO Webсайт: www.digoo.cc (Заўвага: Гэта запаўняльнік URL, please refer to actual product documentation for correct support links.)
• "Easy security" App Support: Check the app's 'Help' or 'About' section for in-app support options.