1. Уводзіны
The LanParte Wireless LANC Remote Control (Model LRC-02) provides comprehensive wireless control for Panasonic GH4, GH5, and other cameras utilizing the LANC protocol. This device allows users to remotely manage video recording, photo capture, and zoom functions, enhancing operational flexibility during shoots.
2. Змесціва ўпакоўкі
Праверце, ці ўсе пералічаныя ніжэй прадметы ўваходзяць у вашу ўпакоўку:
- Бесправадны выдалены перадатчык
- Бесправадны прыёмнік
- 2.5mm to 2.5mm LANC Connection Cable
- Hot Shoe Adapter Screw
- Mini Screwdriver (for battery compartment)
Image: All components of the LanParte Wireless LANC Remote Control system, including the transmitter, receiver, cable, hot shoe adapter, and screwdriver.
3. Прадукт скончыўсяview
3.1. Перадатчык
The transmitter features several buttons for controlling camera functions:
- Кнопка фота: Націсніце, каб зрабіць фотаздымак.
- W/T Buttons: Control zoom functions (Wide and Telephoto) when using compatible power zoom lenses.
- Cam Power Button: Intended to power the camera on/off. Note: Functionality may vary by camera model.
- Кнопка START/STOP: Initiates and terminates video recording.
3.2. Прыёмнік
The receiver connects to your camera and communicates wirelessly with the transmitter:
- 2.5mm LANC Port: Connects to the camera's LANC input using the provided cable.
- Светлавы індыкатар: Provides status feedback (e.g., power, connection status).
- Мантажная разьба: Allows attachment to a hot shoe or other mounting points using the adapter screw.
Image: The LanParte wireless remote transmitter and receiver, connected by the 2.5mm LANC cable.
4. Настройка
4.1. Устаноўка батарэі перадатчыка
- Знайдзіце батарэйны адсек на задняй панэлі перадатчыка.
- Use the provided mini screwdriver to open the battery compartment cover.
- Insert a CR2032 coin cell battery, ensuring correct polarity (+/-).
- Надзейна зачыніце крышку батарэйнага адсека.
4.2. Receiver Connection and Mounting
- Connect one end of the 2.5mm LANC connection cable to the receiver's 2.5mm port.
- Connect the other end of the cable to the LANC input port on your Panasonic GH4, GH5, or compatible camera.
- Attach the hot shoe adapter screw to the receiver's mounting thread.
- Slide the receiver onto your camera's hot shoe and tighten the adapter screw to secure it.
Image: A user holding the LanParte remote transmitter, with the receiver connected to a Panasonic GH5 camera via cable.
5. Інструкцыя па эксплуатацыі
Ensure both the camera and the remote control system are powered on before operation.
- Power On/Off Camera: Націсніце Сіла камеры button on the transmitter. Note that this function's compatibility can vary by camera model.
- Пачаць/спыніць відэазапіс: Націсніце ПУСК/СТОП button to begin recording. Press it again to stop recording.
- Зрабіць фота: Націсніце Фота button to take a still photograph.
- Кіраванне маштабаваннем: If using a power zoom lens, press the W button to zoom out (Wide) and the T button to zoom in (Telephoto).
6. Тэхнічнае абслугоўванне
- Keep the remote control and receiver clean and dry. Use a soft, dry cloth for cleaning.
- Пазбягайце ўздзеяння экстрэмальных тэмператур, вільгаці або прамых сонечных прамянёў на прыладу.
- When not in use for extended periods, consider removing the battery from the transmitter to prevent leakage.
- Store the device in a protective case to prevent physical damage.
7. Выпраўленне непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Пульт не адказвае. | Low or dead transmitter battery. Receiver not powered or connected. Out of range. | Replace transmitter battery. Ensure receiver is properly connected to camera's LANC port. Move closer to the receiver. |
| Cam Power button does not work. | Camera model does not support remote power control via LANC. | This is a camera-specific limitation. Manually power on/off the camera. |
| Zoom function not working. | Non-power zoom lens attached. Power zoom function disabled in camera settings. | Ensure a compatible power zoom lens is used. Check camera settings to enable power zoom control. |
| Recording/Photo not activating. | Incorrect camera mode. Loose cable connection. | Set camera to appropriate video or photo mode. Verify the LANC cable is securely connected to both receiver and camera. |
8. Тэхнічныя характарыстыкі
- Нумар мадэлі: ЛРК-02
- Марка: LanParte
- Вага прадмета: 8.3 унцыі
- Тэхналогія падключэння: Wireless (Infrared, based on product description)
- Сумяшчальныя прылады: Cameras (specifically Panasonic GH4, GH5, and LANC protocol cameras)
- Максімальная колькасць падтрымоўваных прылад: 1 (one receiver per camera)
- асаблівасць: Эрганамічны дызайн
9. Гарантыя і падтрымка
LanParte products are typically covered by a limited manufacturer's warranty. For specific warranty details, duration, and terms, please refer to the documentation provided with your purchase or visit the official LanParte webсайт.
For technical support, troubleshooting assistance, or service inquiries, please contact LanParte customer support directly through their official channels. Provide your product model number (LRC-02) and purchase information when seeking support.