Diversitech FP-22 Condensate Removal Pump User Manual

1. Уводзіны

This manual provides essential instructions for the installation, operation, and maintenance of the Diversitech FP-22 Condensate Removal Pump. The FP-22 is designed to efficiently manage condensate water from furnaces and boilers, particularly in applications involving acidic and high-temperature conditions, up to 190°F (88°C).

Key features include a 22-foot maximum lift, steam-resistant electronics, vibration-dampening rubber feet, metal hang tabs for secure mounting, a built-in safety overflow switch, a check valve, and LED status indicators. The pump comes with four inlet holes, integrated P-traps, and 20 feet of 3/8" discharge tubing for a complete setup.

Малюнак 1.1: Пярэдні бок view of the Diversitech FP-22 Condensate Removal Pump. This image shows the overall design of the pump, including the red base and black motor housing.

2. Важная інфармацыя па бяспецы

Калі ласка, уважліва прачытайце ўсе інструкцыі перад устаноўкай і эксплуатацыяй. Невыкананне гэтых інструкцый можа прывесці да пашкоджання маёмасці, траўмаў або смерці.

• Заўсёды адключайце прыладу ад электрасеткі перад выкананнем любога тэхнічнага абслугоўвання або рамонту.
• Ensure the pump is installed by a qualified professional in accordance with local electrical and plumbing codes.
• Не выкарыстоўвайце помпу, калі пашкоджаны шнур харчавання або вілка.
• This pump is designed for condensate removal only. Do not use it for flammable liquids or other applications.
• Keep hands and foreign objects away from moving parts.
• The pump is rated for 120V. Ensure the power supply matches this requirement.

3. Змесціва ўпакоўкі

Праверце наяўнасць усіх прадметаў у камплекце:

• Diversitech FP-22 Condensate Removal Pump (120V)
• 20 feet of 3/8" discharge tubing
• Кіраўніцтва па ўстаноўцы і эксплуатацыі (гэты дакумент)

4. Інструкцыя па ўстаноўцы

4.1 Мантаж помпы

The FP-22 pump can be mounted on a flat surface or suspended using the integrated metal hang tabs. For optimal noise reduction and stability, utilize the vibration-dampening rubber feet.

• Choose a stable, level location near the condensate source.
• If suspending, ensure the mounting surface is secure and can support the pump's weight when full.

Малюнак 4.1: Збоку view of the FP-22 pump, highlighting the metal hang tabs for secure mounting.

4.2 Condensate Inlet Connection

The pump features four inlet holes with built-in "P" traps. Connect the condensate drain line from your furnace or boiler to one of these inlets.

• Ensure a tight, leak-free connection.
• The integrated P-traps prevent odors and gases from entering the system.

4.3 Падключэнне напорнай лініі

Connect the provided 3/8" discharge tubing to the pump's discharge outlet. Route the tubing to a suitable drain location, ensuring a continuous downward slope if possible, or a clear path for the pump to lift the water.

• Avoid kinks or sharp bends in the discharge tubing.
• Secure the tubing to prevent accidental dislodgement.
• The pump includes a check valve to prevent backflow.

Малюнак 4.2: Верх view of the FP-22 pump, illustrating the four inlet ports and the discharge connection point.

4.4 Электрычнае падключэнне

Connect the pump's power cord to a dedicated 120V electrical outlet. Ensure the outlet is properly grounded and protected by a circuit breaker.

• Не выкарыстоўвайце падаўжальнікі.
• Пераканайцеся, што крыніца харчавання адпавядае магутнасці помпыtagэлектронныя патрабаванні.

5. Аперацыя

The Diversitech FP-22 operates automatically. When condensate water fills the reservoir to a predetermined level, the internal float switch activates the pump, which then discharges the water through the discharge tubing. Once the water level drops, the pump deactivates.

5.1 Святлодыёдныя індыкатары

The pump is equipped with LED indicators to provide status updates:

• Святлодыёд харчавання: Indicates the pump is receiving electrical power.
• Запусціць святлодыёд: Illuminates when the pump motor is actively running.
• Святлодыёдны сігнал трывогі: Activates if the water level reaches the high-level safety overflow switch, indicating a potential issue.

5.2 Safety Overflow Switch

A built-in safety overflow switch provides an additional layer of protection. If the water level rises above the normal operating range, this switch will activate, typically shutting down the connected HVAC equipment to prevent overflow and water damage. Consult your HVAC system's manual for wiring instructions for this safety feature.

6. Тэхнічнае абслугоўванне

Рэгулярнае тэхнічнае абслугоўванне забяспечвае аптымальную прадукцыйнасць і падаўжае тэрмін службы вашага кандэнсатнага помпы.

6.1 Перыядычная чыстка

• Адключыць харчаванне: Always unplug the pump from the electrical outlet before cleaning.
• Drain Reservoir: Remove any remaining water from the reservoir.
• Чысты вадаём: Use a mild detergent and warm water to clean the inside of the reservoir, removing any sludge or debris. Pay attention to the float switch mechanism to ensure it moves freely.
• Праверка труб: Check the inlet and discharge tubing for blockages or signs of wear.
• Зборка: Reconnect all tubing and plug the pump back into the power outlet.

Perform this cleaning at least once every six months, or more frequently if the condensate quality is poor or the pump is in heavy use.

7. Выпраўленне непаладак

This section addresses common issues you might encounter with your FP-22 condensate pump.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

For warranty information and technical support, please refer to the official Diversitech webсайт або звярніцеся ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі як пацверджанне пакупкі.

вытворца: Карпарацыя DiversiTech

Webсайт: www.diversitech.com (Напрampспасылка, фактычная спасылка можа адрознівацца)

For service or parts, please contact a qualified HVAC technician or the manufacturer directly.